Introduction
The POC Obex Connect helmet is designed to provide adaptable protection for various skiing and snowboarding styles. It is lightweight and well-ventilated, making it suitable for all-day, all-mountain use. Constructed with an EPS liner, PC shell, and ABS top shell, the helmet offers a balance of security, durability, comfort, and protection. Key features include a MIPS Evolve Brain Protection System, a 360° adjustment system for a secure fit, and fully adjustable ventilation with integrated goggle vents to prevent fogging.
Setup and Fit
Helmet Sizing and Fit Adjustment
To ensure optimal protection, your helmet must fit correctly. The Obex Connect features a 360° adjustment system that spans the circumference of your head. Turn the dial at the back of the helmet to tighten or loosen the fit until it is snug and comfortable without causing pressure points. The helmet should sit level on your head, covering your forehead without obstructing your vision.
Image: Internal view of the helmet, highlighting the size adjustment system and internal padding. Ensure the helmet fits snugly around your head.
MIPS Evolve Brain Protection System
The helmet is equipped with the MIPS Evolve Brain Protection System, an integrated, lightweight system designed to enhance rotational impact protection. This system features energy-absorbing layers and a low-friction layer to reduce rotational forces that can occur during certain impacts.
Video: An overview of the POC Obex MIPS Helmet, demonstrating its features and design. This video provides visual guidance on the helmet's construction and MIPS technology.
Detachable Ear Pads
The ear pads are detachable, allowing for customization based on weather conditions and personal preference. They can be removed for riding in warmer weather or for cleaning.
Image: Detached ear pads, which can be removed for warmer conditions or for cleaning.
Goggle Compatibility
A fixed goggle clip is integrated into the helmet design to provide extra security and keep your goggles firmly attached during use.
Operating the Helmet
Ventilation Control
The Obex Connect helmet features fully adjustable ventilation. Sliding vent covers allow you to easily regulate airflow for optimum temperature control, adapting to various weather conditions and activity levels.
Image: Side view of the helmet, illustrating the ventilation system for temperature regulation.
Goggle Venting
Integrated vents at the front of the helmet are designed to align with your goggles, allowing warm air and steam to escape. This feature helps prevent goggle fogging, maintaining clear vision.
Maintenance
Cleaning Your Helmet
- Clean the helmet shell with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as these can damage the helmet's materials.
- The internal padding and ear pads can be gently hand-washed with mild soap and water. Allow them to air dry completely before reinserting them into the helmet.
- Do not machine wash or tumble dry any helmet components.
Storage
Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it near heat sources or in areas where it could be exposed to petroleum products or cleaning agents, as these can degrade the helmet's protective materials.
Troubleshooting
Helmet Feels Too Loose or Too Tight
Adjust the 360° adjustment system dial at the back of the helmet. Turn clockwise to tighten and counter-clockwise to loosen. Ensure the helmet sits level and comfortably without excessive movement or pressure points. If you cannot achieve a proper fit, you may need a different size.
Goggles Fogging Up
Ensure the helmet's ventilation system is open, especially the front vents designed to work with goggles. Check that your goggles are properly seated against the helmet to allow for optimal airflow through the integrated goggle vents. If fogging persists, consider adjusting your goggle strap or using anti-fog treatments on your goggle lenses.
Unusual Noises or Rattling
Check that all removable components, such as ear pads and the goggle clip, are securely attached. Inspect the helmet for any visible damage or loose parts. If you find any damage or cannot resolve the issue, discontinue use and contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | POC |
| Model Name | Ski Helmet (Obex Connect) |
| Outer Material | Polycarbonate (PC) |
| Inner Material | Expanded Polystyrene (EPS) |
| Special Features | Adjustable Strap, Lightweight, MIPS Technology, Ventilation |
| Age Range | Adult |
| Item Weight | 2.05 Pounds (approx. 0.93 kg) |
| Included Components | Ski helmet |
Warranty Information
The POC Obex Connect helmet comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from misuse, accidents, modifications, or normal wear and tear.
Customer Support
For further assistance, technical support, or warranty claims, please contact POC customer service directly. Refer to the official POC website for the most up-to-date contact information and support resources.
Online Resources: Visit the POC Store on Amazon
