Inexaccessories DLD 0302
Inexaccessories 60W 24V Dimmable LED Driver (Model DLD 0302) User Manual
Comprehensive instructions for installation, operation, and maintenance.
Introduction
This manual provides detailed instructions for the safe and efficient use of your Inexaccessories 60W 24V Dimmable LED Driver. Please read all instructions carefully before installation and operation. Keep this manual for future reference.
The Inexaccessories 60W 24V Dimmable LED Driver is designed to convert 100-130V AC input to a stable 24V DC output, enabling dimmable functionality for various LED lighting applications. It is compatible with leading dimmers such as Lutron, Leviton, and Crestron, and is suitable for both indoor and outdoor installations.
Important Safety Information
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Disconnect power at the circuit breaker before installing or servicing.
- Do not exceed the maximum wattage rating of 60W.
- Ensure proper grounding to prevent electric shock.
- Do not modify the driver or its components.
- Operate within specified voltage and temperature ranges.
- This device is suitable for dry, damp, and wet locations.
Specifications
| Feature | Detail |
|---|---|
| Model Number | DLD 0302 |
| Input Voltage | 100-130V AC, 50/60Hz |
| Output Voltage | 24V DC |
| Output Current | 2.5A |
| Max Output Power | 60W |
| Dimming Type | Triac/ELV/MLV |
| Certifications | UL Listed, FCC Compliant, Class 2 |
| Protection Features | Short Circuit, Over-Voltage, Over-Current, Over-Temperature |
| Operating Environment | Dry, Damp, and Wet Locations |
Setup and Installation
Before beginning installation, ensure all power is disconnected at the circuit breaker. This LED driver can be used as a dimmable LED driver with a dimmer switch or as a universal LED driver without one.
Wiring Connection Diagram
Refer to the diagram below for correct wiring. The input wires (black and white) connect to the AC power source, and the output wires (red and black) connect to the 24V DC LED lighting.
Image: Wire Connection Diagram. This image illustrates two wiring configurations: one for use with a dimmer switch (dimmable LED driver) and one for use without a dimmer switch (universal LED driver). It shows the black and white input wires connecting to the AC source and the red (+) and black (-) output wires connecting to the LED load.
For detailed wiring instructions, please visit the manufacturer's website: http://etf.demidim.com/
Physical Dimensions
The compact design allows for installation in tight spaces, such as behind cabinets or within ceilings. The dimensions are approximately 7.2 cm (2.83 inches) in length, 4.0 cm (1.57 inches) in width, and 2.3 cm (0.91 inches) in height.
Image: Product dimensions. This image displays the Inexaccessories 60W 24V Dimmable LED Driver with its dimensions labeled: 7.2cm/2.83inch length, 4.0cm/1.57inch width, and 2.3cm/0.91inch height.
For more information on product dimensions and installation guidelines, refer to: http://etf.demidim.com/
Dimmer Compatibility
This LED driver is compatible with a wide range of Triac/ELV/MLV dimmers. Below is a compatibility list for common Lutron, Leviton, and Crestron dimmers.
Image: Dimmer Compatibility List. This table lists various dimmer models from brands like Lutron, Leviton, and Crestron, along with their dimming ranges and types (MLV/TRIAC, ELV).
Operating Instructions
Once properly installed and connected to a compatible dimmer (if dimming functionality is desired), the LED driver will power your 24V DC LED lighting. The driver provides flicker-free 0-100% dimming and silent operation.
Image: 0-100% Dimming. This image visually represents the dimming capability of the LED driver, showing a range from 0% (dark) to 100% (bright) in various indoor settings.
Adjust the dimmer switch to achieve the desired brightness level for your LED lights. The driver ensures stable output across the dimming range.
Video: Inexaccessories Dimmable LED Driver in operation. This video demonstrates the dimming functionality of the LED driver, showing smooth transitions in light intensity when controlled by a dimmer switch.
Applications
The Inexaccessories 60W 24V Dimmable LED Driver is suitable for a wide range of 24V DC LED lighting applications, including:
- LED Strips
- Halogen Bulbs (24V DC compatible)
- LED Modules
- Light Bars
- Accent Lights
- Cabinet Lights
- Ceiling Lights
- Spot Lights
Image: Multi-Appliance Use. This image displays various lighting applications where the LED driver can be used, such as ceiling lights, spot lights, cabinet lights, and LED strips in different indoor and outdoor settings.
Maintenance
The Inexaccessories LED Driver is designed for long-term, maintenance-free operation. No user-serviceable parts are inside. To ensure optimal performance and longevity:
- Keep the driver free from dust and debris.
- Ensure adequate ventilation around the unit to prevent overheating.
- Do not expose the unit to corrosive chemicals.
- Periodically check wiring connections for tightness and integrity.
CAUTION: Do not open the driver casing. Opening the casing will void the warranty and may expose you to dangerous electrical components.
Troubleshooting
If you experience issues with your LED driver, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No light output | No power, loose connections, faulty LED load, driver failure. | Check power supply, verify all wiring connections, test LED load with another power source, contact support if driver is suspected faulty. |
| Flickering lights | Incompatible dimmer, overloaded driver, loose connections. | Ensure dimmer is compatible (refer to compatibility list), reduce LED load to stay within 60W, check wiring. |
| Lights not dimming | Incompatible dimmer, incorrect wiring for dimming. | Verify dimmer compatibility, check wiring against the dimmable driver diagram. |
| Driver is hot to touch | Overloaded, insufficient ventilation. | Ensure total LED load does not exceed 60W. Provide adequate airflow around the driver. The driver has built-in over-temperature protection (auto-shutdown at 100℃±10℃, auto-recovery). |
Image: Multi-Protection Features. This image highlights the various safety features of the LED driver, including short circuit protection, over-voltage protection, over-current protection, and temperature protection, indicated by icons and text.
The driver includes multiple protection mechanisms: short circuit, over-voltage, over-current, and over-temperature protection. These features ensure safe and reliable operation.
For further assistance, please contact customer support.
Warranty Information
This Inexaccessories LED Driver is backed by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.
Please retain your proof of purchase for warranty claims.
Customer Support
For technical support, troubleshooting, warranty claims, or any questions regarding your Inexaccessories LED Driver, please contact our dedicated customer support team.
Contact information can typically be found on the product packaging or the official Inexaccessories website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.