Inexaccessories specializes in aftermarket car electronics, including Android head units, portable CarPlay screens, subwoofer enclosures, and vehicle-specific installation kits.
Inexaccessories is a provider of automotive electronics and audio components, focused on upgrading vehicle infotainment and sound systems. The brand offers a wide range of Android-based car stereos and multimedia receivers designed to fit specific vehicle models from manufacturers like Jeep, Toyota, Ford, and Dodge. These head units typically feature modern connectivity options such as Wireless CarPlay, Android Auto, Bluetooth 5.0, and GPS navigation users to modernize older dashboards.
Beyond head units, Inexaccessories supplies essential car audio installation parts, including MDF subwoofer speaker enclosures, double DIN cages, and fascia kits. The product line caters to both car audio enthusiasts and DIY installers looking for cost-effective solutions to enhance their in-car entertainment experience.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
According to product documentation for many Inexaccessories Android units, the default factory setting password is '779822'. Detailed settings can be accessed through the Factory Set menu.
To connect Wireless CarPlay, first pair your iPhone to the unit via Bluetooth. Once paired, your phone should prompt you to 'Use CarPlay'. Ensure Wi-Fi is enabled on your phone as it is required for the wireless data transmission.
Yes, most vehicle-specific Inexaccessories head units (e.g., for Jeep or Toyota) support steering wheel controls (SWC). You may need to configure the buttons in the system settings app under 'Steering Wheel Learning' or ensure the CAN-bus decoder is properly connected.
Check your wiring connections, specifically the yellow (constant 12V), red (ACC 12V), and black (ground) wires. Ensure the negative battery cable was disconnected during installation and reconnected securely. If the issue persists, check the fuse on the back of the unit.