SwanScout 710A Dual Phone Wireless Charger User Manual

Introduction

Thank you for choosing the SwanScout 710A Dual Phone Wireless Charger. This device is designed to provide efficient and convenient charging for your iPhone, Apple Watch, and AirPods simultaneously. Featuring a sleek two-tone design and a compact foldable stand, it is ideal for both home and travel use. This manual provides detailed instructions on how to set up, operate, and maintain your charger, along with important safety information and troubleshooting tips.

Image: The SwanScout 710A Dual Phone Wireless Charger in use, simultaneously charging two iPhones and an Apple Watch.

What's in the Box

Please check the package contents upon unboxing to ensure all items are present and in good condition.

• SwanScout 710A Dual Phone Wireless Charging Station
• USB-C to USB-C Charging Cable (1 unit)
• 30W Charging Brick (1 unit)
• User Manual
• Warranty Card

Image: A visual representation of all items included in the SwanScout 710A product package.

Product Features

Dual Phone Charging

The SwanScout 710A is engineered to charge two iPhones simultaneously, making it convenient for personal and work devices, or for sharing with family. This design helps reduce cable clutter and keeps your desktop organized.

Image: The SwanScout 710A charger connected to power, demonstrating its ability to charge two phones and an Apple Watch simultaneously.

Fast Charging for Apple Watch

This charging station supports 5W fast charging for Apple Watch Series 7 and later models. Charge your Apple Watch 10 to 80% in approximately 55 minutes, which is significantly faster than standard 2.5W chargers.

Image: A detailed view of the Apple Watch charging area on the SwanScout 710A, highlighting its 5W fast charging capability and estimated charging times for different Watch models.

Adjustable Brightness Clock

Equipped with a built-in digital clock, the charging station allows you to check the time without needing to activate your phone. It features 4 adjustable brightness levels, including an option to turn it off completely for an undisturbed sleep environment.

Image: The SwanScout 710A on a nightstand, illustrating the digital clock with various brightness settings for user comfort.

Flat Design for Horizontal Charging of Earbuds

The charger features a flat design that allows for horizontal placement of earbuds for wireless charging. Ensure proper placement on the induction coil for optimal charging.

Image: The SwanScout 710A charger demonstrating horizontal placement for wireless earbud charging, alongside an iPhone.

Raised Charging Area Design

The raised design of the phone charging areas ensures precise coil alignment, which is crucial for accurate and efficient wireless charging.

Image: A hand placing a phone onto the raised charging pad of the SwanScout 710A, highlighting the design for optimal charging alignment.

Compact Foldable Stand

When folded, the charging station occupies minimal space, making it an ideal travel companion. Its compact design allows for easy storage in luggage or small bags.

Image: The SwanScout 710A charger in its folded, compact state, shown next to a travel bag to illustrate its portability.

Elegant Two-Tone Design

The SwanScout 710A features a sophisticated black front and white back, offering a unique and elegant aesthetic that complements any space.

Image: Front and rear views of the SwanScout 710A, showcasing its distinctive black and white two-tone design.

Setup Guide

Follow these steps to set up your SwanScout 710A wireless charger:

1. Unpack: Carefully remove all components from the packaging.
2. Connect Power: Insert the USB-C end of the provided charging cable into the USB-C port on the back of the SwanScout 710A charging station.
3. Plug In: Insert the other end of the USB-C cable into the 30W charging brick. Plug the charging brick into a standard wall outlet.
4. Power On: The digital clock display on the charger will illuminate, indicating that the device is powered on and ready for use.
5. Adjust Stand (Optional): If desired, unfold the integrated stand on the back of the charger to position it upright for optimal viewing and charging angles.

Operating Instructions

Using your SwanScout 710A charger is straightforward:

1. Charging Phones: Place your iPhone(s) vertically onto the designated charging pads. Ensure the phone is centered on the pad for optimal charging. The charging indicator lights on the display will show charging status.
2. Charging Apple Watch: Place your Apple Watch onto the magnetic charging module on the side of the station. Ensure it snaps into place securely.
3. Charging Earbuds: For wireless earbuds (e.g., AirPods), place the charging case horizontally onto the flat charging area. Ensure it is centered over the induction coil.
4. Adjusting Clock Brightness: Press the brightness touch button (sun icon) on the right side of the display to cycle through 100%, 50%, 20% brightness, or turn the clock off.
5. Setting the Time:
   • 12/24H System Switch: Short press the 'O' button once.
   • Enter Time Setting: Long press the 'O' button for 3 seconds to set hours.
   • Adjust Hour/Minute: Short press the '+' or '-' buttons to adjust the hour. Short press the 'O' button again to switch to minutes, then use '+' or '-' to adjust.
   • Exit Setting: Long press the 'O' button for 3 seconds to exit time setting mode.

Image: Diagram showing the control buttons for the digital clock and time setting functions on the SwanScout 710A.

Compatibility

The SwanScout 710A is designed for broad compatibility with Apple devices and other wireless charging enabled earbuds. Please refer to the tables below for specific models.

Dual 10W Charging for Phones

Image: Table showing compatible iPhone, Samsung, and Google phone models for 10W wireless charging.

3W/5W Charging for Apple Watch

Image: Table outlining Apple Watch models compatible with 5W and 3W charging.

3.5W Charging for Wireless Earbuds

Image: Table listing compatible wireless earbud models for 3.5W charging.

Phone Case Guidelines

For optimal charging, ensure your phone case is less than 5mm thick. Avoid using cases with magnetic pads, metal components, credit cards, or metal rings, as these can interfere with wireless charging.

Image: Visual guidelines for phone case compatibility, indicating acceptable and unacceptable types for wireless charging.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your SwanScout 710A charger.

• Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use abrasive cleaners, solvents, or chemical sprays.
• Storage: When not in use for extended periods, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
• Handling: Avoid dropping or subjecting the charger to strong impacts. Do not disassemble or attempt to repair the device yourself.
• Ventilation: Ensure the charger has adequate ventilation during use. Do not cover it with cloths or place it in enclosed spaces that could restrict airflow.

Troubleshooting

If you encounter issues with your SwanScout 710A charger, refer to the following common problems and solutions:

Specifications

Warranty and Support

Your SwanScout 710A Dual Phone Wireless Charger comes with a warranty. Please refer to the included Warranty Card for specific terms and conditions regarding coverage and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact SwanScout customer service through the contact information provided on the Warranty Card or visit the official SwanScout website.

Manufacturer: Shenzhen Swanscout Innovations Technology Co., Ltd.