RAINPOINT Sprinkler Timer: 2 Zone Water Timer Instruction Manual

1. Introduction

Thank you for choosing the RAINPOINT 2 Zone Water Timer. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new irrigation controller. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Product Overview

The RAINPOINT 2 Zone Water Timer is designed to automate your watering schedule for lawns, gardens, and flower beds. It features two independent outlets, allowing you to manage two separate watering zones with distinct programs. Key features include rain delay, manual watering, and automatic timed irrigation.

Figure 1: Front view of the RAINPOINT 2 Zone Water Timer, showing the digital display, control dial with various settings (ON, OFF, SET CLOCK, START TIME, HOW LONG, HOW OFTEN, VIEW SET), and the two water outlets at the bottom. The display currently shows 'START TIME 6:38 AM' and 'ZONE [1] 2'.

3. Setup

3.1 Battery Installation

1. Locate the battery compartment on the back of the timer.
2. Slide the battery cover open.
3. Insert two (2) AA alkaline batteries, ensuring correct polarity (+/-).
4. Close the battery cover securely to maintain its waterproof seal.

3.2 Connecting the Timer

1. Ensure your outdoor faucet is turned off.
2. Thread the timer onto your outdoor faucet. Hand-tighten only. Do not overtighten.
3. Connect your garden hoses or irrigation lines to the two outlets at the bottom of the timer. Ensure a secure connection to prevent leaks.
4. Slowly turn on your outdoor faucet.

3.3 Setting the Clock

1. Turn the control dial to SET CLOCK.
2. The hour will flash. Use the + and - buttons to adjust the hour (AM/PM).
3. Press OK/MANUAL to confirm the hour.
4. The minute will flash. Use the + and - buttons to adjust the minute.
5. Press OK/MANUAL to confirm the minute. The clock is now set.

4. Operating Instructions

The RAINPOINT 2 Zone Water Timer allows for flexible programming. You can program each zone independently. The control dial guides you through the programming steps.

4.1 Programming an Automatic Schedule

1. Turn the control dial to START TIME. Use + and - to set the desired start time for watering. Press OK/MANUAL to confirm.
2. Turn the dial to HOW LONG. Use + and - to set the duration of watering (e.g., 30 minutes). Press OK/MANUAL to confirm.
3. Turn the dial to HOW OFTEN. Use + and - to set the frequency (e.g., every day, every 2 days, specific days of the week). Press OK/MANUAL to confirm.
4. To program the second zone, press the ZONE button. The display will switch to Zone 2. Repeat steps 1-3 for Zone 2.
5. Once programming is complete, turn the dial to ON to activate the schedule.

4.2 Manual Watering

To water manually without affecting your programmed schedule:

1. Ensure the dial is set to ON.
2. Press the OK/MANUAL button.
3. Use the + and - buttons to set the desired manual watering duration.
4. Press OK/MANUAL again to start manual watering. The timer will automatically stop after the set duration.

4.3 Rain Delay Function

The rain delay feature allows you to pause your watering schedule for a set period, preventing overwatering during rainy weather.

1. Ensure the dial is set to ON.
2. Press and hold the DELAY button for 3 seconds.
3. Use the + and - buttons to select the desired delay duration (e.g., 24, 48, 72 hours).
4. Press OK/MANUAL to confirm the rain delay. The timer will resume its programmed schedule after the delay period.

5. Maintenance

• Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use fresh alkaline batteries.
• Cleaning: Periodically clean the timer's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Filter Screen: Check the inlet filter screen for debris and clean it as needed to ensure proper water flow.
• Winterization: Before the first frost, remove the timer from the faucet, remove the batteries, and store the timer indoors in a dry, protected location to prevent freezing damage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

RAINPOINT products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official RAINPOINT website. Keep your purchase receipt as proof of purchase for warranty claims.