BOTSLAB 360+ HK50 Smart In-Car Camera User Manual

1. Introduction

The BOTSLAB 360+ HK50 is an advanced smart in-car camera designed to enhance your driving safety and provide comprehensive recording capabilities. Featuring a 150-degree ultra-wide-angle lens, 1620p resolution, and night vision, it captures clear footage day and night. Equipped with Wi-Fi connectivity, voice control, and advanced driver assistance systems (ADAS), the HK50 offers a seamless and intelligent recording experience for your vehicle.

The Botslab HK50 Dash Cam, shown from two angles, highlighting its compact design and the prominent optical lens on the front. The device features a sleek grey and black finish.

2. Key Features

• High Resolution Recording: Captures video at 2880x1620P (3K) resolution with H.265 video encoding for crystal clear footage.
• Ultra-Wide Viewing Angle: Features a 150-degree wide-angle lens (F1.5 aperture) to cover multiple lanes and minimize blind spots.
• Night Vision: Enhanced visibility in low-light conditions.
• Wi-Fi Connectivity: Built-in 2.4GHz Wi-Fi for easy connection to your smartphone for live view, playback, and settings management.
• Voice Control: Supports voice commands for hands-free photo and video recording.
• Advanced Driver Assistance Systems (ADAS): Monitors the area in front of the vehicle to provide alerts.
• Multiple Recording Modes: Includes loop recording, emergency recording, time-lapse recording, and parking mode.
• MicroSD Card Support: Supports micro SD cards up to 256GB (exFAT format recommended).
• Built-in Audio: Equipped with a microphone and speaker for audio recording and playback.
• Super Capacitor: Utilizes a 5.5V-2F super capacitor for reliable power in extreme temperatures.

An infographic illustrating the key features of the Botslab HK50 Dash Cam, including Advanced Driver Assistance Systems (ADAS), voice control, 3K resolution, F1.5 aperture, support for up to 256GB microSD cards, parking surveillance, mobile app control, 150-degree wide-angle view, and Wi-Fi connectivity.

3. Package Contents

Please check the box for the following items:

• Driving Recorder Main Unit x1
• USB Cable x1
• Sticker x2
• Product Manual x1
• Camera Mounting Lever x1
• Car Charger x1
• 3M Adhesive x2

4. Setup

4.1 Mounting the Dash Cam

1. Clean the area on your windshield where you intend to mount the camera. Ensure it does not obstruct your view.
2. Attach one of the 3M adhesive stickers to the camera mount.
3. Firmly press the mount with the camera attached onto the chosen spot on your windshield. Hold for a few seconds to ensure strong adhesion.
4. Use the camera mounting lever to adjust the camera angle for optimal road visibility.

4.2 Power Connection

1. Connect the provided USB cable to the dash cam's power input port.
2. Plug the other end of the USB cable into the car charger.
3. Insert the car charger into your vehicle's cigarette lighter socket. The camera will power on automatically when the vehicle starts.

4.3 MicroSD Card Installation

The dash cam requires a MicroSD card for recording. It supports cards up to 256GB with exFAT format.

1. Locate the MicroSD card slot on the dash cam.
2. Gently insert the MicroSD card into the slot until it clicks into place. Ensure the correct orientation.
3. To remove, gently push the card in until it springs out.

4.4 Initial Setup & Wi-Fi Connection

Upon first power-on, the camera may prompt for initial setup. Follow the on-screen instructions or voice prompts. To connect via Wi-Fi:

1. Download the official Botslab app from your smartphone's app store.
2. Enable Wi-Fi on your smartphone and open the Botslab app.
3. Follow the app's instructions to search for and connect to the dash cam's Wi-Fi network. The network name and password are usually found on the camera or in the manual.

The Botslab HK50 Dash Cam installed on a car's windshield, with a smartphone nearby displaying the companion app interface. This illustrates the camera's integration within a vehicle and its mobile app control.

5. Operation

5.1 Recording Modes

• Loop Recording: The camera continuously records, overwriting the oldest files when the MicroSD card is full.
• Emergency Recording: Activated by the G-sensor upon detecting a sudden impact or collision. These files are locked and will not be overwritten by loop recording.
• Time-Lapse Recording: Records video at a very low frame rate, useful for long-term surveillance.

5.2 Voice Control

The HK50 supports voice commands for convenient operation. Simply speak the command to trigger actions like taking a photo or starting/stopping video recording.

5.3 Parking Mode

When enabled, parking mode allows the dash cam to monitor your vehicle while parked. It typically uses the G-sensor to detect impacts and automatically record footage, even when the car is off. Ensure continuous power supply for this feature.

5.4 ADAS Functionality

The Advanced Driver Assistance Systems (ADAS) feature monitors the road ahead and provides alerts for potential hazards, such as lane departure warnings or forward collision warnings. Refer to the app settings to enable and configure ADAS.

5.5 Mobile App Control

The Botslab mobile app provides full control over your dash cam. You can:

• View live footage from the camera.
• Playback recorded videos and photos.
• Download files to your smartphone.
• Adjust camera settings (resolution, recording modes, ADAS, etc.).
• Update firmware.

A graphic displaying four key features of the dash cam through icons: 1620P resolution, parking surveillance, 150-degree wide-angle recording, and voice-activated control.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Do not use abrasive cleaners or solvents.
• MicroSD Card: Periodically format your MicroSD card (at least once a month) using the camera's settings to ensure optimal performance and prevent data corruption. Back up important files before formatting.
• Firmware Updates: Regularly check for firmware updates via the Botslab app to ensure your camera has the latest features and bug fixes.
• Operating and Storage Temperature: The camera is designed to operate and be stored within a temperature range of -20℃ to +50℃. Avoid exposing the device to temperatures outside this range.

7. Troubleshooting

• Camera not powering on: Ensure the car charger is properly connected to both the camera and the vehicle's power outlet. Check the vehicle's cigarette lighter fuse.
• Recording issues: Ensure a MicroSD card is inserted and formatted correctly. Check if the card is full or corrupted. Try a different MicroSD card.
• Wi-Fi connection problems: Ensure the camera's Wi-Fi is enabled. Restart both the camera and your smartphone. Try reconnecting through the app.
• Poor video quality: Clean the camera lens. Ensure the protective film (if any) has been removed from the lens. Check the resolution settings in the app.
• Voice control not responding: Speak clearly and ensure there is minimal background noise. Check the voice control settings in the app.
• Camera freezes or becomes unresponsive: Use the reset button (if available) or disconnect and reconnect the power supply to restart the device.

8. Specifications

The Botslab HK50 Dash Cam positioned on a dark surface. The text describes its advanced features: a 150-degree wide-angle lens, 2880x1620P resolution, H.265 video encoding technology for clear recording, 2.4GHz Wi-Fi support, and voice command capability to enhance driving safety.

9. Warranty and Support

For warranty information, please refer to the warranty card included in your product packaging or visit the official BOTSLAB website. For technical support, troubleshooting assistance, or to inquire about repairs, please contact BOTSLAB customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.