Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Origin21 LED Vanity Bar with Motion Sensing Night Light. Please read this manual thoroughly before installation and retain it for future reference.
The LED Vanity Bar features a matte black finish with a white acrylic shade, integrated LED lighting, motion sensing capabilities, adjustable white light (2700K-6500K), and continuous dimming from 10% to 100%.
Important Safety Information
- Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
- Installation must be performed by a qualified electrician or in accordance with local electrical codes.
- Do not modify the fixture in any way.
- Ensure all connections are secure and properly insulated.
- This product is designed for indoor use only and is not water resistant. Do not install in areas where it may be exposed to direct water.
- Do not look directly into the LED light source when illuminated.
Package Contents
Verify that all components are present and undamaged before installation.
- LED Vanity Bar (Base and Shade pre-assembled)
- Mounting Hardware (screws, wire nuts, etc.)
- Instruction Manual
Image: The product packaging for the Origin21 LED Vanity Bar, displaying key features such as motion sensing, adjustable white light (2700K-6500K), continuous dimming, and dimensions (24 in x 3.56 in x 5 in). The packaging also highlights a 5-year limited warranty and integrated LED technology.
Product Specifications
| Feature | Specification |
|---|---|
| Model Number | 5742833 |
| Dimensions (L x W x H) | 24 in x 3.56 in x 5 in (60.96 cm x 9.04 cm x 12.7 cm) |
| Wattage | 25W Max |
| Lumen Output | 1583 Lumen |
| Color Temperature | Adjustable White Light (2700K - 6500K) |
| Dimming Range | 10% - 100% Continuous Dimming |
| Special Features | Motion Sensing, Adjustable Color Temperature, Dimmable |
| Power Source | Electric (120 Volts) |
| Material | Acrylic (Shade), Matte Black Finish |
| Indoor/Outdoor Usage | Indoor Only |
| Weight | 3 pounds |
Installation Instructions
Before you begin, ensure the power is turned off at the circuit breaker.
- Prepare the Mounting Surface: Ensure the electrical box is securely mounted and accessible.
- Attach Mounting Bracket: Secure the mounting bracket to the electrical box using the provided screws.
- Wire Connections:
- Connect the green or bare copper ground wire from the fixture to the ground wire from the electrical box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box.
- Secure all wire connections with wire nuts and electrical tape.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure no wires are pinched.
- Restore Power: Turn the power back on at the circuit breaker.
Image: An installed Origin21 LED Vanity Bar, showcasing its sleek design and the integrated night light function, which activates via motion sensing. The main light provides bright, adjustable illumination.
Operating Instructions
Main Light Operation:
The main light is controlled by a standard wall switch. Flip the switch to turn the light ON or OFF.
Adjusting Color Temperature (2700K-6500K):
To change the color temperature from warm white (2700K) to cool white (6500K), rapidly toggle the wall switch OFF and ON. Each toggle will cycle through the available color temperatures. Stop at your desired setting.
Dimming (10%-100%):
This fixture supports continuous dimming. Use a compatible dimmer switch (sold separately) to adjust the brightness from 10% to 100%.
Motion Sensing Night Light:
The integrated night light function activates automatically when motion is detected in low-light conditions. It provides a soft, ambient glow for convenience and safety during nighttime hours. The motion sensor is located on the fixture itself.
Image: A detailed view of the Origin21 LED Vanity Bar, emphasizing its adjustable white light capability, which ranges from 2700K (warm) to 6500K (cool). This image also shows the sleek matte black finish and white acrylic shade.
Care and Maintenance
- Cleaning: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic shade.
- LEDs: The integrated LED light source is designed for long life and does not require replacement.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Loose wiring; Faulty switch. | Check circuit breaker; Verify all wire connections are secure; Test or replace switch. |
| Night light not activating. | Sufficient ambient light; Motion sensor obstructed or faulty. | Ensure area is dark enough for sensor activation; Clear any obstructions from the sensor; Contact support if issue persists. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch; Loose wiring. | Ensure a compatible LED dimmer switch is used; Check wire connections. |
| Cannot change color temperature. | Incorrect toggling speed. | Ensure rapid toggling of the wall switch (OFF-ON) to cycle through color temperatures. |
Warranty and Support
This Origin21 LED Vanity Bar is covered by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Origin21 customer service. Please have your model number (5742833) and proof of purchase ready.
Contact information (e.g., website, phone number) would typically be provided here by the manufacturer.
