TOOBUR IDW20

TOOBUR Smartwatch IDW20 User Manual

Model: IDW20

Introduction

The TOOBUR IDW20 Smartwatch is designed to enhance your daily life with its advanced features, including communication, fitness tracking, and health monitoring. This manual provides essential information for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity.

Setup

1. Charging the Smartwatch

Before initial use, fully charge your TOOBUR IDW20 Smartwatch. A full charge typically takes 2.5 hours. Once charged, the smartwatch offers approximately 7 days of typical use and up to 30 days of standby time.

2. App Installation and Pairing

To utilize all features, download the VeryFit app on your smartphone. The smartwatch is compatible with iOS 9.0 and Android 6.0 or higher. Ensure Bluetooth is enabled on your phone, then open the VeryFit app to pair your device. Follow the on-screen instructions within the app to complete the pairing process.

Operating Instructions

1. Call Function and Notifications

The TOOBUR IDW20 allows you to answer and make calls directly from your wrist. Stay informed with notifications for messages, emails, and social media. Please note that direct replies to messages are not supported on the watch.

TOOBUR Smartwatch displaying call, notification, and Alexa voice assistant features.

Image: TOOBUR Smartwatch displaying call, notification, and Alexa voice assistant features.

2. Integrated Alexa Voice Assistant

Utilize the built-in Alexa to control smart home devices, set alarms, check the weather, and more, all with voice commands.

Video: Demonstration of Alexa and stable Bluetooth calling on the smartwatch.

3. Fitness Tracking

Elevate your fitness journey by tracking daily steps, distance, and calories burned. The smartwatch supports over 100 sports modes, including running, cycling, basketball, and Pilates. Detailed exercise reports are generated to help you train more scientifically.

TOOBUR Smartwatch displaying various sports mode icons and exercise data.

Image: TOOBUR Smartwatch displaying various sports mode icons and exercise data.

4. 24-Hour Health Monitoring

Prioritize your health with continuous monitoring of heart rate, stress levels, and sleep quality (including awake, REM, light, and deep sleep stages). All health data seamlessly syncs with the VeryFit app for analysis. The device also includes a menstrual cycle tracker for women.

TOOBUR Smartwatch displaying heart rate, blood oxygen, and menstrual cycle tracking data.

Image: TOOBUR Smartwatch displaying heart rate, blood oxygen, and menstrual cycle tracking data.

TOOBUR Smartwatch displaying sleep monitoring data, including light, deep, REM, and awake times.

Image: TOOBUR Smartwatch displaying sleep monitoring data, including light, deep, REM, and awake times.

5. Display and Customization

Experience vivid visuals on the 1.91-inch HD display. Personalize your smartwatch by choosing from over 100 watch faces available in the VeryFit app, or upload your own images to create a unique look.

TOOBUR Smartwatch showing its 1.91-inch HD screen, weight, and thickness.

Image: TOOBUR Smartwatch showing its 1.91-inch HD screen, weight, and thickness.

Maintenance

1. Water Resistance

The TOOBUR IDW20 Smartwatch has an IP68 waterproof rating, making it suitable for swimming (up to 5 meters deep). However, it is not recommended for diving, saunas, exposure to seawater, or hot water, as these conditions may compromise its water resistance.

TOOBUR Smartwatch being splashed with water, illustrating its IP68 waterproof rating.

Image: TOOBUR Smartwatch being splashed with water, illustrating its IP68 waterproof rating.

2. Strap Replacement and Adjustment

To replace or adjust the watch strap, follow the instructions provided in the video below. Ensure the strap is securely attached after any adjustments.

Video: Instructions on how to replace and adjust watch straps.

Troubleshooting

If you encounter issues with your TOOBUR IDW20 Smartwatch, consider the following:

  • Device Not Turning On: Ensure the smartwatch is fully charged. Connect it to the charging cable and allow it to charge for at least 30 minutes before attempting to power it on again.
  • Connection Issues: If the smartwatch is not connecting to your phone, restart both devices. Then, open the VeryFit app and attempt to re-pair the smartwatch. Ensure Bluetooth is active on your phone.
  • Inaccurate Data: For health and fitness tracking, ensure the smartwatch is worn snugly on your wrist. Keep the sensors clean and free from debris.
  • Notifications Not Appearing: Check your phone's notification settings for the VeryFit app to ensure all necessary permissions are granted. Also, verify that notifications are enabled within the VeryFit app for the specific applications you wish to receive alerts from.

For persistent issues not resolved by these steps, please refer to the official TOOBUR support resources.

Specifications

Model NumberIDW20
Operating SystemProprietary OS
Display Size1.91 Inches
Display TypeOLED
Resolution320 x 320
Connectivity TechnologyBluetooth
Wireless Communication StandardBluetooth
Battery CompositionLithium Ion
Charging Time2.5 Hours
Water Resistance LevelIP68 (up to 1.5 meters depth)
GPSGPS via smartphone
Sensors/TrackersCalories burned, Sleep duration, Heart rate, Blood oxygen (SpO2), Step count
Special FeaturesPhone call, Notifications, Activity tracker, Multi-sport tracker, Cycle tracking, Amazon Alexa
Compatible DevicesAndroid Smartphones, iOS Smartphones
Dimensions26 x 3.5 x 1 centimeters
Strap MaterialSilicone
UPC850066865231

Warranty and Support

For detailed warranty information, product registration, or technical assistance, please visit the official TOOBUR website or contact their customer support directly. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.