SinoTrack GPS Tracker ST-909L User Manual

Introduction

The SinoTrack ST-909L is a versatile 4G GPS tracker designed for vehicles, offering real-time location monitoring, anti-theft features, and an integrated car charging function. Its discreet design allows it to blend seamlessly into your vehicle's interior, providing peace of mind through continuous tracking and various alert functionalities. This manual provides comprehensive instructions for setting up, operating, and maintaining your device.

Figure 1: SinoTrack ST-909L GPS Tracker alongside its mobile application interface, demonstrating real-time tracking capabilities.

Key Features

• 4G Network Support: Ensures accurate and reliable positioning with automatic switching to 2G network in low signal areas.
• SOS Button: Sends emergency messages and calls to designated guardians and the platform during abnormal conditions.
• Real-Time Tracking: Utilizes LTE, GSM, GPRS, and GPS satellites for precise location tracking (up to 10 meters accuracy) via web or mobile app.
• Discreet Design: Functions as a car charger, concealing its GPS tracking capabilities.
• No Monthly Fee Platform: Access to online tracking service without recurring platform fees (SIM card with data plan required).
• Voice Monitor: Allows listening to the surroundings of the device by calling its SIM number.
• History Route Playback: View and playback daily tracking history.
• Geo-Fence: Set up virtual zones to receive alerts when the device enters or exits defined areas.
• Over-speed Alarm: Receive notifications if the vehicle exceeds a set speed limit.
• Shocking Alarm: Alerts for unusual vibrations or movements.
• Built-in Battery: Provides backup power for continued tracking even when unplugged.

Figure 2: Overview of the ST-909L's powerful features and dimensions.

What's in the Box

• 1 x ST-909L 4G GPS Tracker
• 2 x Invisible Lids (for concealing SIM card slot)
• 1 x Product Box

Figure 3: Package contents of the SinoTrack ST-909L.

Setup Guide

Follow these steps to set up your SinoTrack ST-909L GPS Tracker for optimal performance.

Step 1: Activate SIM Card

Purchase a local 4G (LTE) SIM card. Insert the SIM card into your mobile phone to activate it and remove any PIN code. Ensure the SIM card can make calls, send texts, and has an active internet connection. Once confirmed, carefully insert the activated SIM card into the tracker's SIM slot.

Figure 4: Location of ports and SOS button on the device.

Figure 5: How to use the invisible lid to conceal the SIM card slot.

Step 2: Power On the Tracker

Charge the device for approximately 1 hour initially. The yellow and blue indicator lights will begin flashing as the device searches for network and GPS signals. Allow about 5 minutes in an area with good reception (e.g., near a window or outdoors) for both lights to become constant. If the yellow light continues to flash, move the device to another location. A constant blue light indicates a GPS signal, while a constant yellow light indicates a network connection. If no GPS signal is available, the device will use LBS (Location Based Service) for positioning.

Step 3: Setting APN for the Tracker

To enable data communication, you need to configure the APN (Access Point Name) settings. Obtain the APN details (APN, username, password) from your SIM card provider. Send an SMS command from another phone to the tracker's SIM card number:

• If your SIM card's APN has no username or password:
  Send: 8030000 [space] APN
  Example: 8030000 everywhere (The tracker will reply "SET OK")
• If your APN includes a username and password:
  Send: 8030000 [space] APN [space] APNuser [space] APNpass
  Example: 8030000 everywhere eesecure secure

Note: APN settings vary by SIM card provider. Adjust the command according to your specific APN details.

Step 4: Setting GPRS Mode

After setting the APN, send the following SMS command to enable GPRS mode:

7100000

Wait approximately 30 seconds. Both the blue and orange indicator lights should remain constantly ON, indicating that the tracker is active and ready for online tracking. You can now log in to the SinoTrackPro web platform or mobile app. Your username is the tracker's ID number (found on the product), and the default password is 123456.

If the device is online but shows a China location, take it outdoors to an area with good signal reception to acquire a GPS signal. The location will update once a signal is obtained.

Operating Instructions

Real-Time Tracking

Access real-time location data of your vehicle through the SinoTrackPro web platform or mobile application. The platform displays the current position, speed, and status of the tracker.

Figure 6: Real-time tracking interface on the mobile app.

Figure 7: SinoTrack tracking platform accessible on various devices.

SOS Function

In an emergency, press the SOS button on the device. This will send an SOS message to pre-configured guardian numbers and the tracking platform, simultaneously initiating a call to the guardian. If you call the SIM number in the device, it will automatically answer, allowing you to hear sounds around the device.

Figure 8: SOS function and voice monitoring capability.

History Route Playback

Review past travel routes and activities of your vehicle. The platform allows you to select a date range and playback the route, showing speed, stops, and total distance traveled.

Figure 9: History route playback feature on the mobile app.

Geo-Fence

Set up virtual boundaries (geo-fences) on the map. You will receive alerts whenever the tracker enters or exits these predefined areas, providing an additional layer of security and monitoring.

Figure 10: Setting up a geo-fence for vehicle security.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the device in a cool, dry place when not in use.
• Battery Care: Although the device has a built-in battery, it is primarily designed to be powered by the car's charging port. Ensure it is regularly connected to power to maintain battery health.
• Software Updates: Periodically check the SinoTrackPro platform or app for any available firmware or software updates to ensure optimal performance and access to new features.

Troubleshooting

If you encounter issues with your SinoTrack ST-909L, refer to the following common problems and solutions:

• Device is not online:
  • Ensure the SIM card is activated and has a data plan.
  • Verify the APN settings are correctly configured (refer to Step 3 in Setup Guide). Send RCONF to the device to check its current settings.
  • Confirm the GPRS mode is enabled (refer to Step 4 in Setup Guide).
  • Check network signal strength in the device's location.
• Location shows China or is inaccurate:
  • Take the device outdoors to an open area with clear sky view to acquire a strong GPS signal.
  • Ensure the device has been powered on for at least 5 minutes to allow GPS acquisition.
• No response to SMS commands:
  • Verify the SIM card in the tracker has sufficient balance for SMS.
  • Ensure the SMS command format is correct, including spaces.
  • Check if the SIM card is properly inserted and the device is powered on.
• Device lights are not on:
  • Ensure the device is properly plugged into a working car charging port.
  • Charge the device for at least 1 hour.

Specifications

Warranty and Support

For information regarding product warranty, technical support, or frequently asked questions, please visit the official SinoTrack store or contact their customer service directly.

Official SinoTrack Store: SinoTrack Store on Amazon