Manuals+

Pawfly Pawfly-2860

Pawfly Automatic Fish Feeder (Model Pawfly-2860) Instruction Manual

Your guide to automated fish feeding for aquariums and ponds.

1. Introduction

Thank you for choosing the Pawfly Automatic Fish Feeder, Model Pawfly-2860. This professional pond fish feeder is designed to automatically dispense food at scheduled intervals, ensuring your fish are fed consistently, even when you are away. It features a large 10 L capacity, moisture-proof design, and flexible feeding options to accommodate various fish and feeding requirements.

This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your new automatic fish feeder.

2. Safety Information

  • Read all instructions carefully before use.
  • Keep the device away from children and pets to prevent accidental damage or injury.
  • Ensure the feeder is securely installed to prevent it from falling into the water.
  • Do not immerse the main unit in water. The feeder is weatherproof, but not submersible.
  • Use only the specified 1.5 V AA batteries (not included). Do not mix old and new batteries or different types of batteries.
  • Remove batteries if the device will not be used for an extended period.
  • Do not use live, wet, or irregular food, as this can clog the dispenser.
  • Always ensure the food container lid is securely fastened to prevent wildlife tampering and moisture intrusion.

3. Setup and Installation

3.1 Unpacking and Components

Carefully remove all components from the packaging. Ensure you have the main feeder unit, food container, lid, desiccant bag, food guide weather cover, food stirrer, fixation feet, screws, and portion control plugs.

3.2 Battery Installation

  1. Open the battery case cover located at the bottom of the feeder.
  2. Insert four 1.5 V AA batteries (not included) according to the polarity markings.
  3. Close the battery case cover securely. The feeder features a memory retention system to preserve settings during battery replacement.
Video: This video demonstrates how to install batteries into the Pawfly Automatic Fish Feeder. It provides visual guidance for correct battery insertion and securing the battery compartment.

3.3 Food Container Assembly and Filling

  1. Remove the lid from the food container.
  2. Insert the desiccant bag into its designated rack inside the lid to help keep food dry and fresh.
  3. Fill the food container with suitable dry fish food (pellets, sticks, corn niblets, etc.) up to 12 mm in size. NOTE: Not suitable for live, wet, or irregular food.
  4. Securely reattach the lid to the food container, ensuring the buckle-lock is engaged to prevent wildlife tampering.
  5. Attach the filled food container to the main feeder unit.
Pawfly Automatic Fish Feeder with 10L capacity
Image: The Pawfly Automatic Fish Feeder showcasing its 10 L capacity, filled with dry fish food. This image highlights the large storage volume and the type of food suitable for the feeder.
Pawfly Automatic Fish Feeder detachable components
Image: An exploded view of the Pawfly Automatic Fish Feeder showing its detachable and cleanable components, including the lid, desiccant bag, food container, food stirrer, and food dispensing port. This illustrates the modular design for easy maintenance.

3.4 Mounting Methods

The feeder offers two primary installation methods:

  1. Flat Surface Placement: Place the feeder stably on any flat surface near your pond or aquarium. The bottom features 4 anti-slip sponge pads for stability.
  2. Screw-Secured Installation: For added security, especially outdoors, you can secure the feeder to the ground or wood using the attached fixation feet and screws.
Pawfly Automatic Fish Feeder screw-secured installation
Image: Close-up of the Pawfly Automatic Fish Feeder showing the screw-secured installation method, where the feeder is fixed to a surface using screws. This highlights a secure mounting option for outdoor use.
Video: This video demonstrates how to fix the automatic fish feeder to a fish tank using different methods, including attaching it to the tank top cover with a double-sided sticker, fixing it to ribbed tank glass with an adjustable base, and fixing it to vertical tank glass with an adjustable base. It provides visual guidance for secure installation.
Video: This video provides a detailed installation guide for a fish feeder, showing how to assemble the components, install the clamp, and connect the power supply. It also demonstrates how to replace the small dispense impeller and an alternative mounting method for covered fish tanks.

4. Operating Instructions

The Pawfly Automatic Fish Feeder features a clear LCD display for easy programming of feeding schedules and portions.

Pawfly Automatic Fish Feeder LCD display
Image: A close-up of the Pawfly Automatic Fish Feeder's clear LCD display, showing various indicators like current time, specific feeding time, portions per feeding, days between feedings, and today's feeding counts. This image helps users understand the display interface for programming.

4.1 Clock Time Calibration

  1. Press "MODE" to display the "Now" part.
  2. Press "SET" for 3 seconds.
  3. Press "+" or "-" to correct the hour.
  4. Press "SET" again.
  5. Press "+" or "-" to correct the minute.
  6. Press "SET" again to finish setting.

4.2 Portion Setting

Precise portion control starts at 30g per serving. The 5 control plugs can reduce it by 5g each.

  1. Press "MODE" to display the "Vol" part.
  2. Press "SET" for 3 seconds.
  3. Press "+" or "-" to adjust it (up to 99).
  4. Press "SET" again to finish setting.
Pawfly Automatic Fish Feeder portion control plugs
Image: A view of the Pawfly Automatic Fish Feeder's internal mechanism showing the 5 portion control plugs. These plugs allow users to precisely adjust the amount of food dispensed per serving by reducing it by 5 grams each.

4.3 Auto-Feeding Time Setting

The feeder can dispense food up to 6 times a day and can release multiple portions each time.

  1. Press "MODE" to display the "Timing" part.
  2. Press "SET" for 3 seconds.
  3. Press "+" or "-" to adjust the hour.
  4. Press "SET" again.
  5. Press "+" or "-" to adjust the minute.
  6. Press "SET" again to set the 2nd feeding. (NOTE: Press "MODE" to finish setting if you don't need the 2nd feeding.)

4.4 Feeding Interval Setting

Set intervals for feeding up to 9 days.

  1. Press "MODE" to display the "Int." part.
  2. Press "SET" for 3 seconds.
  3. Press "+" or "-" to adjust it (up to 9 days).
  4. Press "SET" again to finish setting.

4.5 Manual Feeding Setting

  • 1 Feeding: Press "+" for 3 seconds.
  • Continuous Feeding: Press "MODE" and "+" for 3 seconds. To stop it, press "-".

4.6 Default Feeding Schedule Setting (9 Selectable Modes)

  1. Press "MODE", "SET", and "+" for 3 seconds.
  2. Press "+" repeatedly to choose from 9 modes.
  3. Press "SET" again to confirm choice.
  4. "h" can be seen beside the clock time.

NOTE: Choose "OFF", and the above setting will be canceled.

Default Feeding Modes
ModeDescriptionFeeding Times
1d8Feed 8 times a day6:00, 8:00, 10:00, 12:00, 14:00, 16:00, 18:00, 20:00
1d6Feed 6 times a day6:00, 8:00, 10:00, 12:00, 14:00, 16:00
1d4Feed 4 times a day8:00, 12:00, 16:00, 20:00
1d3Feed 3 times a day8:00, 12:00, 18:00
1d2Feed 2 times a day8:00, 18:00
1d1Feed once a day8:00
2d1Feed once every 2 days8:00
3d1Feed once every 3 days8:00
4d1Feed once every 4 days8:00

5. Maintenance

5.1 Weatherproof Design and Moisture Prevention

The feeder is constructed from reliable ABS and PC materials to resist long-term sun and water exposure. The retractable food dispensing port, desiccant bag, and protective weather cover work together to prevent moisture intrusion and keep food fresh.

Pawfly Automatic Fish Feeder weatherproof design
Image: The Pawfly Automatic Fish Feeder demonstrating its weatherproof design, showing resistance to sun and rain. This image highlights the durability and protective features of the feeder for outdoor use.
Pawfly Automatic Fish Feeder retractable food dispensing port and buckle-lock lid
Image: Close-up of the Pawfly Automatic Fish Feeder showing its retractable food dispensing port and secure buckle-lock lid. The image illustrates how these features prevent moisture and deter small animals like raccoons, foxes, and squirrels from accessing the food.

5.2 Cleaning

The food container and stirrer are detachable for easy cleaning. Regularly clean these parts to prevent food buildup and ensure proper operation.

  • Remove the food container from the main unit.
  • Disassemble the lid and food stirrer.
  • Wash all removable parts with mild soap and water. Rinse thoroughly and ensure they are completely dry before reassembly.
  • Do not use abrasive cleaners or immerse the main electronic unit in water.

6. Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Feeder not dispensing food.
  • Low or dead batteries.
  • Food container empty.
  • Food clogged in dispenser.
  • Incorrect settings.
  • Replace batteries.
  • Refill food container.
  • Clean the dispensing port and stirrer. Ensure food is dry and suitable.
  • Verify feeding schedule and portion settings on the LCD display.
Food getting wet or clumping.
  • Lid not sealed properly.
  • Desiccant bag needs replacement.
  • Food dispensing port exposed to moisture.
  • Ensure buckle-lock lid is securely closed.
  • Replace the desiccant bag regularly.
  • Ensure the retractable port is functioning correctly and the weather cover is in place.
Feeder not turning on.
  • Batteries incorrectly installed or dead.
  • Check battery polarity and replace with fresh batteries.

7. Specifications

  • Brand: Pawfly
  • Model Number: Pawfly-2860
  • Product Dimensions: 27 x 27 x 38 cm (8.8" L x 8.8" W x 13.3" H)
  • Weight: 2.34 kg
  • Material: Plastic (ABS and PC construction)
  • Capacity: 10 L
  • Power Source: 4 x 1.5 V AA batteries (Not Included)
  • Feeding Frequency: Up to 6 times a day, intervals up to 9 days
  • Portion Control: Starts at 30g per serving, adjustable with 5g reduction plugs
  • Food Type: Suitable for dry foods (pellets, sticks, corn niblets) 2-12 mm
  • Special Feature: Timer, Moisture-Proof, Weatherproof Design

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Pawfly customer service directly. Keep your purchase receipt as proof of purchase.

Related Documents - Pawfly-2860

Preview Pawfly Aquarium Light User Manual and FCC Warning
User manual for the Pawfly Aquarium Light, detailing controller button functions, app control interface, light control settings, power-off memory, and default spectrum settings. Includes important safety instructions and an FCC warning.
Preview Metabo KHE 2660 Quick, KHE 2860 Quick, UHE 2660-2 Quick, UHEV 2860-2 Quick Betriebsanleitung
Umfassende Betriebsanleitung und Sicherheitshinweise für Metabo KHE 2660 Quick, KHE 2860 Quick, UHE 2660-2 Quick und UHEV 2860-2 Quick Bohr- und Meißelhämmer. Enthält technische Daten, Bedienung und Wartung.
Preview Casio Watch User Manual GW-300/500/700 MTG-900/910/930/960 Module 2858-2870
Comprehensive user manual for Casio watches, covering models GW-300/500/700 and MTG-900/910/930/960 with module numbers 2858, 2859, 2860, 2861, 2866, 2867, 2869, 2870. Includes setup, features, maintenance, and troubleshooting.
Preview Metabo KHE/UHE Series Rotary Hammers - Operating Instructions
Comprehensive operating instructions and safety guidelines for Metabo KHE 2660 Quick, KHE 2860 Quick, UHE 2660-2 Quick, and UHEV 2860-2 Quick rotary hammers and chisel hammers. Learn about proper usage, maintenance, and safety features to ensure efficient and safe operation of your Metabo power tool.
Preview Casio Watch Manual: GW-300/500/700, MTG-900/910/930/960 (Modules 2858-2870)
Comprehensive user manual for Casio radio-controlled watches, covering setup, features, maintenance, and troubleshooting for models GW-300/500/700 and MTG-900/910/930/960 (Modules 2858, 2859, 2860, 2861, 2866, 2867, 2869, 2870).