Aqara DL-D07E

Aqara Front Door Handleset DL-D07E Instruction Manual

Model: DL-D07E

1. Product Overview

The Aqara Front Door Handleset DL-D07E is a single cylinder exterior door entry handle with a door lever, designed for modern doors. This non-locking handleset features a reversible design, making it suitable for both right and left-handed doors. It is engineered for easy installation and universal compatibility with standard door sizes and thicknesses.

Aqara Front Door Handleset DL-D07E
Image 1.1: The Aqara Front Door Handleset DL-D07E, showcasing its sleek black finish and modern design.

This handleset is rigorously tested for durability and is designed to complement Aqara U50 and U100 smart locks, enhancing both security and aesthetic appeal.

2. Setup and Installation

2.1 Package Contents

Verify that all components are present before beginning installation. The package includes the handleset and necessary installation hardware.

2.2 Door Compatibility

The handleset is designed to fit standard doors with the following specifications:

  • Backset: 2-3/8" (60mm) or 2-3/4" (70mm)
  • Door Thickness: 1-3/8" (35mm) to 1-3/4" (45.5mm)
  • Hole Size: 2-1/8" (54mm)
Door Hole Size and Backset Compatibility
Image 2.1: Illustration of compatible door hole sizes (2-1/8" or 54mm) and backset measurements (2-3/8" or 60mm, and 2-3/4" or 70mm).
Door Thickness Compatibility
Image 2.2: The handleset accommodates door thicknesses ranging from 1-3/8" (35mm) to 1-3/4" (45.5mm).

2.3 Reversible Design

The handleset features a reversible design, allowing it to be installed on both left-handed and right-handed doors without special modifications. The handle can be flipped to suit the door's orientation during installation.

Reversible Door Handle Design
Image 2.3: Demonstrates the handleset's reversible design, allowing it to be configured for both left and right-hand door orientations.

2.4 Installation Steps

Follow the detailed instructions provided with the installation hardware. Generally, installation involves:

  1. Prepare the door by ensuring the correct hole sizes and backset.
  2. Install the latch mechanism into the door edge.
  3. Assemble the exterior handleset and interior lever, ensuring proper alignment.
  4. Secure all components with the provided screws.
  5. Test the handleset for smooth operation.
Handleset Installed with Smart Lock
Image 2.4: The Aqara handleset installed on a door, shown alongside a compatible Aqara smart lock (U50 or U100, sold separately).

3. Operating Instructions

The Aqara Front Door Handleset DL-D07E is a non-locking passage handleset. Its operation is straightforward:

  • To open the door from the exterior, depress the thumb-press on the handleset.
  • To open the door from the interior, depress the lever handle.
  • The handleset does not provide a locking mechanism and is intended for use with a separate smart lock or deadbolt for security.

4. Maintenance

To ensure the longevity and optimal performance of your Aqara Front Door Handleset, follow these maintenance guidelines:

  • Cleaning: Wipe the handleset regularly with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Lubrication: Periodically apply a small amount of silicone-based lubricant to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
  • Inspection: Routinely check all screws and fasteners to ensure they are tight. Loose components can affect performance and durability.
Handleset Durability Testing
Image 4.1: The handleset has undergone rigorous testing for over 700,000 cycles, ensuring lasting reliability and durability.

5. Troubleshooting

If you encounter issues with your Aqara Front Door Handleset, consider the following common solutions:

  • Handle is Stiff or Not Moving Freely:
    • Check for any obstructions around the handle or latch mechanism.
    • Ensure all mounting screws are not overtightened, which can cause binding.
    • Apply a silicone-based lubricant to the latch bolt and moving parts.
  • Handleset Appears Loose:
    • Tighten all visible mounting screws. Do not overtighten.
    • Ensure the handleset is properly seated against the door surface.
  • Difficulty with Installation:
    • Re-verify door dimensions (thickness, backset, hole size) against the specifications.
    • Ensure the latch mechanism is correctly oriented and fully inserted.
    • Confirm the handleset is correctly oriented for left or right-hand doors.

If problems persist, refer to the support section for further assistance.

6. Specifications

FeatureDetail
BrandAqara
Model NumberDL-D07E
ColorBlack
Exterior FinishBlack, Powder Coated
Product Dimensions11.85"L x 9.09"W
Item Weight2.07 pounds
Lock TypeNo Lock (Passage Handleset)
Hand OrientationAmbidextrous (Reversible)
Included ComponentsInstallation Hardware
Batteries Required?No
UPC192784002285
ManufacturerLumi United Technology Co., Ltd
Detailed Dimensions of Handleset
Image 6.1: Detailed dimensional drawing of the Aqara Front Door Handleset, including the exterior handle and interior lever.

7. Warranty Information

For detailed warranty information regarding your Aqara Front Door Handleset DL-D07E, please refer to the official Aqara website or the warranty card included with your product. Warranty terms and conditions may vary by region and purchase date.

8. Support

If you require further assistance, have questions about installation, operation, or troubleshooting, please visit the official Aqara support website or contact their customer service department. You can find contact information and additional resources on the Aqara website: www.aqara.com

Related Documents - DL-D07E

Preview Aqara Smart Lock U200 Mounting Guidance and Installation
Comprehensive mounting guidance and installation steps for the Aqara Smart Lock U200, covering compatibility with various door locks and cylinders, and detailed instructions for EU Mortise Lock and US Deadbolt Lock installations.
Preview Aqara Smart Lock U300 User Manual and Installation Guide
Comprehensive guide for the Aqara Smart Lock U300, covering product introduction, what's in the box, installation instructions, device binding, initialization, and detailed specifications. Learn how to install, set up, and use the U300 for enhanced home security.
Preview Aqara Adjustable Cylinder for Smart Lock U200 Installation Guide
A detailed guide on how to install and adjust the Aqara Adjustable Cylinder, compatible with the Aqara Smart Lock U200, ensuring a perfect fit for various door thicknesses.
Preview Aqara Smart Lock U50 User Manual: Installation, Features, and Specifications
Comprehensive guide for the Aqara Smart Lock U50, covering product introduction, what's in the box, installation steps, preparation, device binding, HomeKit integration, Google/Alexa connectivity, product specifications, and FCC/IC compliance.
Preview Aqara Wireless Remote Switch T1 (Single Rocker) User Manual
User manual for the Aqara Wireless Remote Switch T1 (Single Rocker), detailing product introduction, quick setup, installation, specifications, and warnings. Control smart home devices with this Zigbee 3.0 compatible switch.
Preview Aqara U100 Smart Lock: Installation Guide and User Manual
Comprehensive guide for the Aqara U100 Smart Lock, covering product introduction, what's in the box, component identification, installation steps, preparation, device binding, and technical specifications. Learn how to use fingerprint, password, NFC, and Apple Home Key for secure home access.