Important Safety Information
Please read this entire instruction manual before installation and assembly. If you have any questions regarding the instructions or warnings, please contact your local distributor for assistance. Keep this manual for future reference.
- Weight Capacity: This TV wall mount is designed for TVs weighing up to 220 lbs (100 kg). Do not exceed this weight limit.
- TV Size Compatibility: Compatible with TVs from 32 inches to 100 inches.
- VESA Compatibility: Supports VESA patterns from 200x100mm to 800x600mm.
- Wall Type: This mount is designed for installation on wood studs (12-24 inches apart), solid concrete walls, or brick walls. DO NOT mount on drywall alone.
- Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
- Always use a stud finder to locate wood studs accurately.
- If you are unsure about the installation process, seek professional assistance.
The USX MOUNT is constructed from upgraded high-strength steel, capable of supporting TVs up to 220 lbs, ensuring enhanced strength and durability.
Setup and Installation
The USX MOUNT is designed for easy installation with a pre-assembled front support, reducing installation time. Follow these general steps for secure mounting:
- Attach Brackets to TV: Secure the TV brackets to the back of your television using the provided hardware. Ensure the VESA pattern matches and screws are tightened appropriately. Be careful not to block any cable connectors.
- Mount Wall Plate: Locate suitable wood studs or a solid concrete/brick wall. Use the included mounting template and leveling device to mark and drill pilot holes. Secure the wall plate firmly to the wall using the appropriate anchors and screws for your wall type.
- Hang TV on Wall Plate: Carefully lift the TV with the attached brackets and hook it onto the wall plate. Ensure the TV is securely seated and locked into place.
Visual guide to the three main steps for installing your USX MOUNT TV wall mount, including the use of the provided mounting template.
The mount offers wide adaptability for various wall types, including wood studs (16-24 inches), concrete, and brick. It supports VESA patterns from 200x100mm to 800x600mm and a maximum load of 220 lbs. Remember: Do not mount on drywall alone.
Ensure that the TV brackets do not obstruct any cable connectors on the back of your television during installation.
Operating the TV Mount
This full motion TV mount provides flexible viewing options:
- Swivel: The mount can swivel up to ±45° to allow for optimal viewing angles from different positions in the room.
- Tilt: Adjust the tilt from +6° to -1° to reduce glare and achieve a comfortable viewing experience.
- Extension & Retraction: The dual articulating arms allow the TV to extend up to 18.7 inches (47.5 cm) from the wall and retract back to a slim 1.81 inches (4.6 cm) profile.
- Leveling: Fine-tune the horizontal level of your TV by ±4° after installation to ensure a perfectly straight display.
Experience comfortable viewing with the mount's swivel capability of ±45° and its ability to extend up to 18.7 inches and retract to 1.81 inches from the wall.
The adjustable tilt feature allows for a +6° to -1° tilt range to reduce anti-glare, and a ±4° leveling adjustment ensures your TV is perfectly horizontal.
Maintenance
To ensure the longevity and safe operation of your USX MOUNT TV wall mount, follow these maintenance guidelines:
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or frequent adjustments may cause fasteners to loosen.
- Cleaning: Use a soft, dry cloth to wipe down the mount. Avoid abrasive cleaners or solvents that could damage the finish.
- Lubrication: The articulating arms are designed for smooth movement. If you notice any stiffness, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with electrical components.
- Weight Check: Reconfirm that the weight of your TV and any attached accessories does not exceed the mount's maximum weight capacity.
Troubleshooting
If you encounter issues with your TV mount, consider the following common solutions:
- TV Not Level: Use the built-in leveling adjustment feature (±4°) to correct any slight tilt. Ensure the wall plate was installed level initially. If the issue persists, re-check wall plate installation.
- Mount Feels Stiff or Difficult to Move: Check if any bolts on the articulating arms are overtightened. Loosen them slightly to allow for smoother movement. Applying a small amount of silicone lubricant to the joints may also help.
- TV Sagging or Twisting: This indicates that the TV's weight might be too close to or exceeding the mount's capacity, or the installation is not secure. Immediately remove the TV and re-evaluate the installation, ensuring all fasteners are properly tightened and the wall type is appropriate for the load.
- Missing Parts: If any standard mounting hardware is missing, contact USX MOUNT customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | USX MOUNT |
| Model Number | tv mount |
| Compatible TV Sizes | 32" - 100" |
| Weight Capacity | Up to 220 lbs (100 kg) |
| VESA Compatibility | Min: 200x100mm, Max: 800x600mm |
| Movement Type | Swivel, Tilt, Articulating |
| Tilt Angle | +6° / -1° |
| Swivel Angle | ±45° |
| Extension from Wall | 1.81" (retracted) to 18.7" (extended) |
| Material | Alloy Steel |
| Color | Black |
| Product Dimensions | 35.43 x 18.11 x 2.56 inches |
| Item Weight | 23 pounds |
| UPC | 797505421729 |
Detailed dimensions of the USX MOUNT, including the wall plate and TV bracket measurements, for planning your installation.
Warranty and Support
USX MOUNT products are manufactured with quality and customer satisfaction in mind. For specific warranty details, please refer to the product packaging or contact USX MOUNT directly.
If you require technical assistance, have questions about installation, or need to report a missing part, please contact USX MOUNT customer support. You can often find support contact information on the official USX MOUNT website or through the retailer where you purchased the product.
Visit the USX MOUNT Store for more information and product resources.
