1. Introduction
Thank you for choosing the DUKWIN FW-066 Fingerprint Lock Watch Winder. This device is designed to keep your automatic watches wound and ready to wear, while also providing secure storage and an elegant display. Please read this manual thoroughly before operating the watch winder to ensure proper use and longevity of the product.
Figure 1: DUKWIN FW-066 Fingerprint Lock Watch Winder
2. Key Features
- Fingerprint Lock: Enhanced security with support for up to 20 fingerprints.
- LCD Touchscreen Display: Easy setup and control of individual watch winding modes.
- Adjustable Watch Pillows: Accommodates various watch sizes (up to 55mm dial, 20mm thickness, 35-62mm bracelet/wrist diameter).
- Multiple TPD Modes: 8 Turns Per Day (TPD) settings (650, 750, 850, 1000, 1250, 1450, 1650, 1950).
- Three Rotation Directions: Clockwise, Counter-clockwise, and Bi-directional.
- Super Quiet Motor: Operates below 5 dB, suitable for bedroom use.
- RGB LED Lighting: Customizable internal lighting with blue illumination and changing RGB options.
- Tempered Glass Door: Provides clear viewing and protection.
- Extra Watch Holders: Additional storage for static watches.
- Remote Control: Convenient operation from a distance.
3. Setup Instructions
3.1 Unpacking and Placement
- Carefully remove the watch winder from its packaging.
- Place the unit on a stable, flat surface away from direct sunlight, extreme temperatures, and moisture.
3.2 Power Connection
Connect the provided AC power adapter to the power input port on the back of the watch winder. Plug the adapter into a standard electrical outlet.
Figure 2: Power Switch and Power Port Location
3.3 Fingerprint Setup
The watch winder features a built-in fingerprint lock for security. Refer to the dedicated fingerprint setup guide included in your package for detailed instructions on registering and managing fingerprints. Up to 20 fingerprints can be stored.
3.4 Watch Placement
- Open the tempered glass door. The winding rotors will automatically pause when the door is open.
- Gently compress the adjustable watch pillow and secure your automatic watch onto it. The pillow is designed to fit watches with a dial diameter up to 55mm, thickness up to 20mm, and bracelet/wrist diameter from 35-62mm.
- Insert the watch and pillow assembly firmly into one of the winding slots. Ensure the watch is securely seated.
- For additional watches, place them in the static watch holders located at the bottom of the unit.
- Close the tempered glass door. The winding function will resume automatically.
Figure 3: Adjustable Watch Pillow for Secure Fit
Video 1: Demonstrating Fingerprint Unlocking and Watch Placement. This video illustrates the process of unlocking the winder with a fingerprint, the automatic pause function when the door is opened, and how to properly place a watch onto the adjustable pillow and into the winding slot.
4. Operating Instructions
4.1 LCD Display Overview
The LCD touchscreen display allows for individual control of each watch rotor's settings. The display shows the motor number (MOT), Turns Per Day (TPD), rotation direction (DIR), power status (ON/OFF), LED light status (LED), and LED adjustment (ADJ).
Figure 4: LCD Display and Control Panel
4.2 Setting TPD and Rotation Direction
Each motor can be programmed independently. Use the touchscreen controls to select the desired TPD mode and rotation direction for each watch. The available TPD modes are: 650, 750, 850, 1000, 1250, 1450, 1650, and 1950. Rotation directions include clockwise, counter-clockwise, and bi-directional (alternating clockwise and counter-clockwise).
4.3 LED Light Control
The watch winder features built-in RGB LED lights. Use the LED and ADJ controls on the LCD display or the remote control to adjust the lighting. You can choose between blue illumination and various RGB changing light effects.
Figure 5: RGB Gradient Lighting Options
4.4 Remote Control Usage
The included remote control allows for convenient adjustment of settings from up to 3 meters away. Functions typically include power on/off, TPD adjustment, direction change, and LED light control.
Video 2: Demonstrating TPD Settings and LED Light Control. This video shows how to navigate the LCD display to select different TPD modes and rotation directions, as well as how to change the RGB LED lighting using the remote control.
5. Maintenance
5.1 Cleaning
To clean the exterior of the watch winder, use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
5.2 Watch Pillow Care
The watch pillows can be gently wiped with a soft, lint-free cloth. Do not immerse them in water or use harsh cleaning agents.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder not rotating | Power adapter not connected; Power switch off; Door open; Incorrect settings. | Ensure power adapter is securely connected and power switch is ON. Close the door. Check LCD settings for TPD and direction. |
| Fingerprint lock not working | Fingerprint not registered; Sensor dirty; Incorrect finger placement. | Refer to the fingerprint setup guide to register your fingerprint. Clean the sensor. Ensure proper finger placement. |
| LED lights not working or changing | LED function turned off; Remote control battery low. | Check LED settings on the LCD display or remote control. Replace remote control batteries if necessary. |
| Watch not winding properly | Incorrect TPD/direction settings for watch; Watch not seated correctly. | Consult your watch manufacturer's specifications for optimal TPD and direction. Ensure the watch is securely placed on the pillow and in the slot. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | FW-066-BK |
| Watch Capacity | 6 automatic watches (winding) + 6 static watches (storage) |
| TPD Modes | 650, 750, 850, 1000, 1250, 1450, 1650, 1950 |
| Rotation Directions | Clockwise, Counter-clockwise, Bi-directional |
| Noise Level | Below 5 dB |
| Watch Pillow Compatibility | Max 55mm watch dial, up to 20mm thickness, 35-62mm bracelet/wrist diameter |
| Power Source | AC Adapter (included) |
| Dimensions (Approx.) | 24.76 x 20.63 x 15.47 inches (62.89 x 52.39 x 39.29 cm) |
| Weight (Approx.) | 30.82 Pounds (13.98 kg) |
8. Warranty and Support
8.1 Product Warranty
The DUKWIN FW-066 Fingerprint Lock Watch Winder comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact DUKWIN customer support through the retailer where the product was purchased or visit the official DUKWIN store online. You can find more information and contact details at the DUKWIN Brand Store.
