1. Introduction
Welcome to the user manual for your Orbic JOURNEY Pro 4G flip phone. This device is designed for essential communication with the added benefits of 4G connectivity and smart features powered by KaiOS 3.1. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new phone, ensuring you can utilize all its functionalities effectively.
2. Package Contents
Please check that all the following items are included in your product package:
- Orbic JOURNEY Pro 4G Main Unit
- AC Adapter
- USB Cable (Type-C)
- Battery
- Quick Start Guide
3. Device Overview
The Orbic JOURNEY Pro 4G features a classic flip phone design with a physical keypad and two displays for convenience.
Key Components:
- Main Display: The internal 3.2-inch TFT LCD screen for primary interaction.
- External Display: A 1.77-inch external display for time, notifications, and caller ID when the phone is closed.
- Keypad: Alphanumeric keys and navigation buttons for easy input and menu navigation.
- Camera: A 5-megapixel rear camera with flash for capturing photos.
- USB Type-C Port: For charging and data transfer.
- 3.5mm Headset Jack: For connecting wired headphones.
4. Initial Setup
4.1. Installing the Battery and SIM Card
- Remove the back cover of the phone.
- Insert the nanoSIM card into the designated SIM slot. Ensure the gold contacts face downwards and the card is correctly oriented.
- Insert the 1850mAh removable battery into its compartment, aligning the contacts.
- Replace the back cover, ensuring it clicks securely into place.
4.2. Charging the Device
- Connect the USB Type-C cable to the phone's charging port.
- Connect the other end of the USB cable to the provided AC adapter.
- Plug the AC adapter into a power outlet.
- The phone will indicate that it is charging. Allow the battery to fully charge before initial use.
4.3. Powering On/Off
- To Power On: Press and hold the Power/End Call button until the screen lights up.
- To Power Off: Press and hold the Power/End Call button, then select 'Power Off' from the options on the screen.
5. Basic Operation
5.1. Making and Receiving Calls
- To Make a Call: Open the phone, enter the phone number using the keypad, and press the Green Call button.
- To Answer a Call: When the phone rings, press the Green Call button. You can answer with the phone closed by pressing the Green Call button, or open the phone to answer.
- To End a Call: Press the Red End Call button.
5.2. Sending and Receiving Messages
- Navigate to the 'Messages' application from the main menu.
- Select 'New Message' to compose a new text message.
- Enter the recipient's number or select from contacts, then type your message using the keypad.
- Press 'Send' to transmit the message.
5.3. Navigation and Smart Features
The Orbic JOURNEY Pro 4G runs on KaiOS 3.1, offering access to various smart applications:
- Web Browser: Access the internet to browse websites.
- Google Maps: Use for navigation and location services.
- YouTube: Watch videos directly on your device.
- Wi-Fi Hotspot (Tethering): Share your phone's 4G internet connection with up to 8 other devices simultaneously. Access this feature through the phone's settings menu.
6. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the phone's exterior. Avoid using harsh chemicals or abrasive materials.
- Battery Care: To prolong battery life, avoid exposing the phone to extreme temperatures. Do not leave the battery fully discharged for extended periods.
- Water and Dust: This device is not rated for water or dust resistance. Avoid exposure to liquids and dusty environments.
- Handling: Handle the phone with care. Avoid dropping it or subjecting it to strong impacts.
7. Troubleshooting
If you encounter issues with your Orbic JOURNEY Pro 4G, please refer to the following common solutions:
| Problem | Solution |
|---|---|
| Phone does not power on | Ensure the battery is correctly installed and charged. Connect the charger and try again. |
| Cannot make or receive calls | Check if the SIM card is properly inserted and activated. Verify network signal strength. Contact your service provider if the issue persists. |
| No internet connection | Ensure mobile data is enabled in settings. Check Wi-Fi connection if using Wi-Fi. Verify your data plan with your service provider. |
| Battery drains quickly | Reduce screen brightness, close unused applications, and disable Wi-Fi/Bluetooth when not in use. Avoid extreme temperatures. |
| Phone is unresponsive | Remove and reinsert the battery to perform a soft reset. |
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Orbic JOURNEY Pro 4G |
| Model Number | O4F231JP |
| Color | Jet Black |
| Operating System | KaiOS® 3.1 |
| Processor | Qualcomm® QM215 Quad-Core (4x 1.3 GHz-ARM Cortex A53) |
| RAM | 1GB |
| Internal Storage | 8GB |
| Expandable Storage | Supports up to 128GB Micro SD |
| Sensors | Magnetic Sensor, Barometric Sensor |
| Fingerprint Authentication | Not Supported |
| Battery Capacity | 1,850mAh (Removable) |
| Charger | 5W (Type C 2.0) Charger |
| Fast Charging | Not Supported |
| Wireless Charging | Not Supported |
| Continuous Talk Time | Max 5.6 hours |
| Continuous Standby Time | Max 150 hours |
| Main Display Size | 3.2 inches TFT LCD |
| Main Display Resolution | 240x320 (125ppi) |
| External Display Size | 1.77 inches TFT LCD |
| External Display Resolution | 128x160 (116ppi) |
| Dimensions (H x W x D) | Approx. 115.3 x 60.9 x 19.8mm |
| Weight | Approx. 148g |
| Body Material | Resin |
| Connector | USB Type-C 2.0 |
| Water/Dust Resistance | Not Applicable |
| Durability | Not Applicable |
| Speakers | 2 |
| Microphones | 2 |
| 3.5mm Headset Jack | Yes |
| Rear Camera | 5 Megapixels (f/2.2) with Flash |
| Front Camera | Not Supported |
| 2G Bands | GSM: 850/900/1800/1900MHz |
| 3G Bands | UMTS: B1/B5/B6/B8/B19 |
| 4G Bands | LTE: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B38/B40/B41 |
| 5G Bands | Not Supported |
| SIM Type | nanoSIM/4EF |
| Wi-Fi® Connectivity | 802.11 b/g/n 2.4GHz |
| Tethering | Supported (up to 8 devices simultaneously) |
| Bluetooth® | 4.2 |
| NFC | Not Supported |
| FeliCa | Not Supported |
| Location System | GPS/AGPS/GLONASS |
9. Warranty and Support
9.1. Warranty Information
The Orbic JOURNEY Pro 4G comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
Warranty Exclusions:
- Damage caused by misuse, alteration, or unauthorized repair.
- Damage due to fire, earthquake, water damage, lightning, or other natural disasters.
- Damage or injury resulting from operations or usage methods contrary to the warnings and instructions in this manual.
- Loss of personal data or property damage incurred from the use or malfunction of this product.
- Products imported privately or parallel imports from overseas businesses are not covered by the product warranty.
9.2. Customer Support
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your Quick Start Guide or visit the official Orbic website for your region.
