GoHawk TR4-Titan Chrome

GoHawk TR4-Titan Motorcycle Bluetooth Speakers User Manual

Model: TR4-Titan Chrome

Brand: GoHawk

Introduction

Thank you for choosing the GoHawk TR4-Titan Motorcycle Bluetooth Speakers. This 4.1-channel amplifier audio system is designed to provide high-quality sound for your motorcycle, ATV, 4-wheeler, or UTV. Featuring waterproof capabilities, Bluetooth 5.0 connectivity, FM radio, USB playback, and AUX input, the TR4-Titan ensures a rich audio experience on the go.

This manual provides detailed instructions for the setup, operation, and maintenance of your GoHawk TR4-Titan system. Please read it thoroughly before installation and use to ensure proper functionality and longevity of the product.

What's in the Box

Carefully unpack all components and verify that you have received the following items:

  • 4 x Speakers (4.25" Chrome)
  • 1 x Amplifier
  • 1 x Wired Control
  • 4 x Mounting Clamps
  • 1 x SAE Power Cord (78" long)
  • 2 x External Antennas
  • 1 x AUX Cable
  • 1 x User Manual
  • Mounting Hardware (various screws and bolts)
All components of the GoHawk TR4-Titan system laid out, including speakers, amplifier, wired control, cables, and mounting hardware.

Figure 1: Complete contents of the GoHawk TR4-Titan package, showing all speakers, the amplifier, wired control, and various cables and mounting accessories.

Setup and Installation

The GoHawk TR4-Titan system is designed for straightforward installation. Follow these steps for optimal setup:

1. Mounting the Speakers and Control

Utilize the provided mounting clamps to securely attach the four 4.25" chrome speakers to your motorcycle's handlebars or other suitable locations. Ensure the speakers are positioned for optimal sound projection and do not obstruct your view or controls. The wired control unit should be mounted in an easily accessible location on the handlebars.

GoHawk speakers mounted on the handlebars of a motorcycle, showing their chrome finish and placement near the rider's view.

Figure 2: Speakers mounted on motorcycle handlebars, demonstrating typical installation.

Close-up of the backlit wired control unit mounted on a motorcycle handlebar, showing its intuitive button layout.

Figure 3: Wired control unit installed on the handlebar for easy access.

2. Wiring the System

The system operates on a standard 12V power connection. Connect the SAE to Ring Terminal Power Cable to your motorcycle's battery: the Red wire to the Positive (+) terminal and the Black wire to the Negative (-) terminal. Ensure all connections are secure and properly insulated. Refer to the wiring diagram for connecting the speakers, amplifier, and wired control unit.

Detailed wiring diagram for the GoHawk TR4-Titan audio system, showing connections between amplifier, speakers, wired control, and power source.

Figure 4: Wiring diagram for the GoHawk TR4-Titan system. Ensure correct connections for power, speakers, and control.

3. Connecting External Antennas

Connect the two external antennas to the amplifier via the standard SMA connections to enhance FM radio reception and Bluetooth range.

Operating Instructions

The GoHawk TR4-Titan offers multiple audio input options and is controlled via the full-function backlit wired control.

1. Power On/Off

Press and hold the power button on the wired control to turn the system on or off.

2. Bluetooth Connectivity

Once powered on, the system will automatically enter Bluetooth pairing mode. On your smartphone or compatible device, search for "GoHawk TR4-Titan" in the Bluetooth settings and select to pair. The system supports a connection range of up to 15 meters (49 feet) for wireless music streaming.

3. FM Radio Operation

Switch to FM mode using the wired control. Use the navigation buttons to scan for available radio stations. The external antenna helps strengthen radio reception.

4. USB Playback

Insert a USB drive containing audio files into the USB port on the amplifier. The system will automatically detect and begin playing music from the drive. Note: The USB port does not support device charging.

5. AUX Input

Connect an external audio device (e.g., MP3 player) to the 3.5mm AUX-IN jack on the amplifier using the provided AUX cable. Switch the system to AUX mode to play audio from the connected device.

6. Subwoofer Output

The amplifier includes a 600W peak subwoofer output for connecting an optional external subwoofer speaker. This output is not available when the FM radio function is active.

Diagram illustrating the various audio functions of the GoHawk TR4-Titan: Bluetooth wireless, FM radio, USB port, and 3.5mm AUX input.

Figure 5: Overview of audio functions available on the GoHawk TR4-Titan system.

Maintenance

The GoHawk TR4-Titan system is designed for outdoor use and features a waterproof (IP56 rated) amplifier and speakers. Regular maintenance will ensure optimal performance and longevity.

Cleaning

Wipe down the speakers and amplifier with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components. Ensure all connections are free from debris.

Storage

If storing your motorcycle or the audio system for an extended period, ensure the system is clean and dry. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your GoHawk TR4-Titan system, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power to the system.Loose power connection, blown fuse, low battery voltage.Check power cable connections to the battery. Verify the 12V power source. Inspect and replace any blown fuses. Ensure the motorcycle battery has sufficient charge.
No sound from speakers.Incorrect speaker wiring, volume too low, incorrect input mode selected.Check all speaker connections to the amplifier. Increase the volume using the wired control. Ensure the correct audio input mode (Bluetooth, FM, USB, AUX) is selected.
Bluetooth not connecting.Device too far, system not in pairing mode, interference.Ensure your device is within 15 meters of the system. Restart both the system and your Bluetooth device. Clear previous Bluetooth pairings on your device and try again.
Poor FM radio reception.Antenna not connected, weak signal area, interference.Ensure both external antennas are securely connected. Try moving to an area with a stronger FM signal.

Specifications

Detailed technical specifications for the GoHawk TR4-Titan Motorcycle Bluetooth Speakers:

FeatureSpecification
Model NameTR4-Titan Chrome
Input Voltage12 Volts
Speaker TypeSpeaker Systems
Speaker Size4.25 Inches
Speaker Maximum Output Power1000 Watts
Surround Sound Channel Configuration4.1
Impedance4 Ohm
Signal-to-Noise Ratio80 dB
Frequency Response20 KHz
Wireless Communication TechnologyBluetooth
Bluetooth Range15 Meters
Connectivity ProtocolBluetooth, AUX-IN
Number of USB 2 Ports1
Is WaterproofTrue (IP56 Rated)
Mounting TypeHandlebar Mount
MaterialAluminum, Metal, Plastic
Product Dimensions4.65"D x 4.25"W x 6.75"H
Item Weight9 Pounds
Diagram showing the dimensions of the GoHawk TR4-Titan amplifier, speakers, and wired control unit.

Figure 6: Dimensions of the GoHawk TR4-Titan components.

Warranty and Support

The GoHawk TR4-Titan Motorcycle Bluetooth Speakers come with a Limited Warranty from the manufacturer, GoHawk. For specific warranty terms, claims, or technical support, please refer to the warranty information provided with your product packaging or visit the official GoHawk website.

You can also visit the GoHawk Store on Amazon for additional product information and support resources.

Related Documents - TR4-Titan Chrome

Preview GoHawk WING Series Powersports Stereo System User Manual
Comprehensive user manual for the GoHawk WING-R40F, WING-R60F, and WING-R80F Powersports Stereo Systems. Includes installation guides, wiring instructions, operation details, features, troubleshooting, specifications, and warranty information.
Preview GoHawk RE8/RE9-X Powersports Amplified Soundbar User Manual & Installation Guide
Comprehensive user manual and installation guide for the GoHawk RE8 and RE9-X Powersports Amplified Soundbars. Features include Bluetooth, USB, AUX, FM radio, and LED lighting. Includes specifications, troubleshooting, warranty, and FCC compliance.
Preview GoHawk TJ4-Q/TN4-Q Powersports Amplified Stereo System User Manual
User manual for the GoHawk TJ4-Q/TN4-Q Powersports Amplified Stereo System, detailing contents, features, installation, and operation.
Preview GoHawk Titan1600 Powersports Stereo System User Manual
User manual for the GoHawk Titan1600 Powersports Stereo System, covering installation, operation, features, troubleshooting, specifications, and warranty information.
Preview Pre-Wired Handlebar Installation Guide for Harley Softail Fatboy & Breakout 2016-2017
Comprehensive installation guide for Pre-Wired Handlebars, specifically designed for 2016-2017 Harley-Davidson Softail Fatboy and Breakout models. This manual provides step-by-step instructions for removing the original handlebar, connecting wiring harnesses (TBW, CAN-Bus, Turn Signal, Heated Grips), and installing the new handlebar and controls. Includes important notes, safety checks, and technical support information.