Introduction
The Antec FLUX Wood PC Case is designed for optimal airflow and component compatibility, featuring a unique combination of metal, glass, and walnut wood. This manual provides essential information for setting up, operating, and maintaining your PC case.
Figure 1: Antec FLUX Wood PC Case, showcasing its elegant design with a tempered glass side panel and a distinctive walnut wood front panel.
Key Features:
- Crafted with a combination of metal, glass and wood to create a high-quality texture with different materials.
- Multi-directional vent design creates a dedicated Antec Flux airflow channel.
- Supports up to 9 fans simultaneously, with pre-installed 3 x P12 PWM at the front & 1 x P12R PWM reverse fan at the power supply chamber & 1 x P14 PWM in the rear.
- Supports simultaneous installation of Front 360mm radiator + Top 360mm radiator or Front 420mm radiator + Top 280mm radiator.
- Widely supports various back-connect motherboards available on the market.
Setup and Installation
This section guides you through the initial setup and component installation process for your Antec FLUX Wood PC case.
Tool-Free Panel Design
The case features a tool-free panel design for easy access to internal components. The top panel, left glass panel, and right metal panel can be removed without tools.
Figure 2: Exploded view illustrating the tool-free removal of the top, left glass, and right metal panels for convenient access.
Motherboard and Component Installation
The spacious interior accommodates E-ATX (≤330 mm), ATX, Micro-ATX, and ITX motherboards. Ensure your CPU cooler height is ≤180 mm and GPU length is ≤408 mm for compatibility.
Figure 3: Internal layout highlighting areas for motherboard, CPU, and GPU installation, demonstrating the extensive interior space.
The case supports back-connect motherboards, allowing cables to be plugged in from behind for a cleaner look and smoother airflow. Supported models include ASUS TUF B760M-BTF WIFI D4, ASUS TX GAMING B760-BTF WIFI, and others.
Figure 4: Illustration of back-connect motherboard support, enabling hidden cable routing for improved aesthetics and airflow.
Cooling System Setup
The FLUX case comes with 5 pre-installed high-performance PWM fans: 3 x P12 PWM at the front, 1 x P12R PWM reverse fan at the power supply chamber, and 1 x P14 PWM in the rear. It supports up to 9 fans simultaneously.
Figure 5: Visual representation of the FLUX airflow, detailing the placement and type of pre-installed fans for efficient cooling.
For liquid cooling, the case supports simultaneous installation of a Front 360mm radiator + Top 360mm radiator, or a Front 420mm radiator + Top 280mm radiator.
Figure 6: Radiator support configurations, including options for 360mm and 420mm radiators in the front and top positions.
The removable top cooling bracket simplifies radiator and fan installation. Mount fans/radiators onto the bracket first, then install the bracket back into the case.
Figure 7: The removable top cooling bracket, designed to streamline the installation of fans and radiators.
Operating
The I/O panel is conveniently located on the top of the case and includes a Type-C 10Gbps port, two USB 3.0 ports, a Headphone/Mic Combo Jack, a Reset button, and a Power button. Dust plugs are included to protect unused ports.
Figure 8: Detailed view of the top I/O panel, showing all available ports and controls for easy access.
The case features a built-in ARGB & PWM fan control hub that syncs with your motherboard, allowing for centralized control of fan speeds and lighting (if compatible ARGB fans are installed).
Figure 9: The integrated ARGB & PWM fan control hub, simplifying fan management and synchronization with the motherboard.
Maintenance
To ensure optimal performance and longevity of your PC components, regular maintenance of the case's dust filters is recommended. The Antec FLUX Wood case includes a bottom full-size pull-out dust filter for easy cleaning and strong dust prevention.
Figure 10: The convenient bottom full-size pull-out dust filter, designed for easy removal and cleaning to maintain optimal airflow.
Periodically remove and clean the dust filter to prevent dust buildup, which can impede airflow and affect cooling efficiency.
Troubleshooting
If you encounter issues with your Antec FLUX Wood PC case, consider the following common troubleshooting steps:
- No Power: Ensure all power cables are securely connected to the power supply, motherboard, and wall outlet. Check the power button connection to the motherboard.
- Fans Not Spinning: Verify that all fan cables are correctly connected to the fan control hub or motherboard headers. Check fan settings in your motherboard's BIOS/UEFI or fan control software.
- Overheating Components: Confirm that all fans are oriented correctly for optimal airflow (intake/exhaust). Clean dust filters regularly. Ensure proper thermal paste application on the CPU cooler.
- I/O Panel Issues: Check internal cable connections from the I/O panel to the motherboard. Ensure USB and audio headers are correctly seated.
- Panel Removal Difficulty: Refer to the "Tool-Free Panel Design" section and ensure no screws or latches are preventing removal. Apply gentle, even pressure.
For persistent issues, consult the Antec support website or contact their customer service for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Antec |
| Model Name | FLUX |
| Item Model Number | FLUX |
| Product Dimensions (LxWxH) | 19.05 x 19.76 x 9.4 inches |
| Item Weight | 20.4 pounds (9.27 Kilograms) |
| Motherboard Compatibility | E-ATX (≤330 mm), ATX, Micro-ATX, ITX |
| Case Type | Mid Tower |
| Material | Metal |
| Cooling Method | Air |
| Pre-installed Fans | 3 x P12 PWM (front), 1 x P12R PWM (PSU chamber), 1 x P14 PWM (rear) |
| Radiator Support | Front: 360mm/420mm; Top: 360mm/280mm |
| Max CPU Cooler Height | ≤180 mm |
| Max GPU Length | ≤408 mm |
| USB Ports | 2 x USB 3.0, 1 x Type-C 10Gbps |
Warranty and Support
Antec provides a limited warranty for its products. Please refer to the official Antec website for detailed warranty terms and conditions specific to your region. For technical support, product inquiries, or warranty claims, please visit the Antec Store on Amazon or their official support channels.
Keep your proof of purchase for warranty validation.
