EGLO Fueva 6 LED Recessed Spotlight User Manual

1. Introduction and Overview

Thank you for choosing the EGLO Fueva 6 LED Recessed Spotlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before installation and keep it for future reference.

Image: Front view of the EGLO Fueva 6 LED Recessed Spotlight, showing its round white design.

The EGLO Fueva 6 LED Recessed Spotlight is a round ceiling light made of durable white plastic, designed to provide timeless and efficient lighting in various indoor spaces. Its integrated LED technology ensures energy-saving performance and a long lifespan. A key feature is the adjustable color temperature, allowing you to customize the ambiance of your room.

2. Safety Information

Always follow basic safety precautions when installing and operating electrical products to reduce the risk of fire, electric shock, and personal injury.

• WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
• Installation must be performed by a qualified electrician or in accordance with local electrical codes.
• Do not modify the product in any way. Any modifications may void the warranty and create safety hazards.
• Ensure the mounting surface can support the weight of the fixture.
• Do not install near heat sources or in excessively humid environments.
• This product is designed for indoor use only.

3. Package Contents

Please check the package contents to ensure all parts are present and undamaged:

• 1 x EGLO Fueva 6 LED Recessed Spotlight (Model: 901397)
• 1 x Installation Manual

If any parts are missing or damaged, please contact EGLO customer support before proceeding with installation.

4. Setup and Installation

Follow these steps for proper installation of your recessed spotlight:

1. Turn off Power: Before starting, ensure the power supply to the installation area is completely turned off at the main circuit breaker or fuse box.
2. Prepare Opening: Create a suitable circular opening in the ceiling for the spotlight. Refer to the product specifications for the exact cutout diameter (typically around 150-160mm for this model).
3. Adjust Color Temperature (Dip Switch): Before inserting the spotlight into the ceiling, locate the Dip Switch on the back of the fixture. Use this switch to select your desired light color:
   • Warm White (2700K): For a cozy and inviting atmosphere (1050 Lumen).
   • Neutral White (4000K): For clear and balanced illumination (1200 Lumen).
   • Cool White (6500K): For a bright and invigorating environment (1200 Lumen).
   

   Image: Illustration of the Dip Switch on the back of the spotlight for color temperature selection.

4. Connect Wiring: Connect the electrical wires from your ceiling to the terminal block on the spotlight. Ensure correct polarity (Live, Neutral, Earth) as per local electrical regulations. Secure all connections.
5. Insert Spotlight: Gently push the spotlight into the prepared ceiling opening. The spring clips on the sides will secure the fixture in place.
6. Restore Power: Once the installation is complete and secure, restore power at the circuit breaker. Test the light to ensure it functions correctly.

5. Operating Instructions

The EGLO Fueva 6 LED Recessed Spotlight operates via your standard wall switch. The chosen color temperature (Warm White, Neutral White, or Cool White) is set using the Dip Switch during installation and remains constant until manually changed again.

• To turn the light ON/OFF, use the wall switch connected to the fixture.
• To change the light color, you must turn off the power, remove the spotlight from its mounting, adjust the Dip Switch on the back, and then reinstall the spotlight.

6. Maintenance

The EGLO Fueva 6 LED Recessed Spotlight requires minimal maintenance.

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the spotlight. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.
• LED Lifespan: The integrated LED light source is designed for a long lifespan and is not user-replaceable. If the LED fails, the entire fixture should be replaced.
• Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7. Troubleshooting

If you encounter issues with your EGLO Fueva 6 LED Recessed Spotlight, refer to the following troubleshooting guide:

If the issue cannot be resolved using this guide, please contact EGLO customer support or a qualified electrician.

8. Specifications

Image: The Fueva 6 series is available in various colors (white, black, silver) and sizes.

9. Warranty and Support

EGLO products are manufactured with high-quality materials and undergo strict quality control. For warranty information and support, please refer to the documentation provided with your purchase or visit the official EGLO website.

For technical assistance or inquiries, please contact EGLO customer service. When contacting support, please have your model number (901397) and purchase details ready.

You can visit the EGLO store on Amazon for more products and information: EGLO Store