1. Introduction
Thank you for choosing DAYBETTER Outdoor LED Strip Lights. This product is designed to provide versatile and vibrant lighting for various outdoor and indoor applications. Featuring an IP67 waterproof rating, remote and app control, and 16 million color options, these 100ft LED rope lights are built for durability and ease of use. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.
Image: DAYBETTER Outdoor LED Strip Lights installed on a house and around a pool, showcasing multicolor illumination.
2. What's in the Box
- 2 Rolls of 50ft LED Strip Lights
- 1 Remote Control
- 1 Power Supply
- 1 Controller
- Mounting Accessories (screws, clips, zip ties)
3. Features
- IP67 Waterproof Rating: Engineered for outdoor conditions, these LED strips are dust-tight and resistant to temporary immersion, suitable for gardens, patios, poolsides, and balconies. The strips and Bluetooth controller are fully waterproof.
- 16 Million Dynamic Colors & Music Sync: Offers a wide spectrum of colors and dynamic lighting effects. Built-in music sync technology allows lights to pulse and flash with audio.
- Dual Control Options: Control lights effortlessly via the user-friendly Bluetooth app (iOS/Android) or the included IR remote.
- Safety Certified Power Adapter: The power adapter is safety certified and features a waterproof cable interface, ensuring high brightness, extended lifespan, and safe operation.
- Effortless Cut-to-Fit Installation: Strips can be easily cut to size at marked scissor points for custom lengths.
- DIY Flexibility: Features a strong self-adhesive backing for simple 'peel and stick' installation on clean, dry surfaces.
- Timer Function: Schedule automatic on/off times for convenience.
Image: Outdoor gathering illuminated by the colorful DAYBETTER LED Strip Lights.
4. Safety Information
- Ensure the power adapter is placed in a dry, sheltered area (e.g., garage, under eaves) for optimal outdoor performance and longevity, as it is indoor-rated.
- Do not submerge the power adapter in water.
- Verify that the power source voltage matches the product's specifications (24V).
- Avoid installing the lights near heat sources or in extremely high-temperature environments.
- Do not cut the LED strip lights at unmarked points, as this may damage the product.
- Keep out of reach of children and pets during installation and operation.
- Disconnect power before any maintenance or cleaning.
Image: Illustration showing the power adapter is not waterproof.
5. Setup & Installation
- Prepare the Surface: Ensure the installation surface is dry, clean, and smooth. Wipe away any dust or debris.
- Plan Layout: Unroll the LED strips and plan your desired layout before removing the adhesive backing. The product includes two 50ft rolls that can be connected to achieve a total length of 100ft. Connect the two rolls to the controller's dual output ports.
- Cutting the Strip (Optional): If a shorter length is required, cut the LED strip only at the designated scissor marks. Cutting at other points may damage the strip.
- Installation Methods:
- Adhesive Backing: Peel off the adhesive film from the strip and firmly press the strip onto the desired location. Apply pressure repeatedly to ensure a secure attachment.
- Cable Zip Ties: For additional security or on rougher surfaces, use the provided cable zip ties to fix the strip light in place.
- Stabilizing Clips & Screws: For permanent and robust installation, use the stabilizing clips and screws to secure the strip light.
- Connect Power: Connect the LED strip(s) to the controller, and then connect the controller to the power supply. Finally, plug the power supply into a suitable electrical outlet. Remember to place the power adapter in a dry, sheltered location.
Image: IP67 Waterproof LED Strip Light, suitable for outdoor use.
Images: Waterproof connector and controller for secure outdoor use.
6. Operating Instructions
6.1 Remote Control
Use the included IR remote control to manage your LED strip lights. Point the remote directly at the controller for best response.
- ON/OFF: Power the lights on or off.
- Color Selection: Choose from various static colors using the color buttons.
- Brightness Adjustment: Increase or decrease the light intensity.
- Dynamic Modes: Select different lighting effects such as flash, strobe, fade, or smooth color changes.
6.2 App Control (Bluetooth)
Download the dedicated Bluetooth app (available on iOS and Android) to unlock advanced control features.
- Scan the QR code on the controller or search for the app name in your device's app store.
- Install and open the app.
- Ensure Bluetooth is enabled on your smartphone. The app should automatically detect the LED strip lights.
- Use the app interface to select from 16 million colors, adjust brightness, choose dynamic modes, set custom scenes, and utilize the music sync and timer functions.
6.3 Music Sync Function
Activate the music sync feature via the app to make your lights dance to the rhythm of your favorite music. The lights will pulse, flash, and change colors in real-time with the audio.
6.4 Timer Function
Set schedules for your lights to turn on or off automatically at specific times using the app. This feature is ideal for daily routines or holiday lighting.
Image: Timer function illustration for automatic light control.
7. Maintenance
- Cleaning: Periodically clean the surface of the LED strips with a soft, damp cloth to remove dust and dirt. Do not use harsh chemicals or abrasive cleaners.
- Connection Check: Regularly inspect all connections, especially the waterproof connectors, to ensure they are secure and free from moisture or damage.
- Power Adapter: Ensure the power adapter remains in a dry, protected environment to prevent water damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not turning on | No power, loose connection, faulty power adapter/controller | Check power outlet, ensure all connections are secure, test with another power source if possible. |
| Remote control not working | Battery depleted, remote not pointed at controller, obstruction | Replace remote battery, ensure direct line of sight to controller, remove any obstructions. |
| App cannot connect to lights | Bluetooth off, app not updated, controller issue | Ensure Bluetooth is enabled on your device, update the app, restart the controller and app. |
| Lights are dim or flickering | Insufficient power, damaged strip section, loose connection | Check power supply, inspect strip for visible damage, ensure connections are tight. |
9. Specifications
- Model Number: TTGA001V2
- Brand: DAYBETTER
- Color: Multicolor
- Indoor/Outdoor Usage: Outdoor
- Special Feature: Waterproof
- Light Source Type: LED
- Power Source: DC
- Voltage: 24 Volts
- Wattage: 72 watts
- Number of Light Sources: 480
- Control Method: App, Remote
- Item Length: 100 Feet (2 x 50ft rolls)
- Material: Plastic
- Item Weight: 4.36 pounds
- Batteries Required: Yes (for remote, 1 Lithium Metal battery)
10. Warranty & Support
For warranty information, technical support, or any product-related inquiries, please refer to the official DAYBETTER website or contact their customer service directly. Keep your purchase receipt for warranty claims.
