1. Introduction
Thank you for choosing the TURBRO Greenland GL9K115 Mini Split AC with Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new system. Please read this manual thoroughly before installation and use, and retain it for future reference.
1.1 Safety Information
Always adhere to local and national electrical codes. Installation must be performed by qualified personnel in accordance with all applicable safety standards. Disconnect power before performing any maintenance or service. Do not attempt to repair the unit yourself. Improper repairs can lead to electric shock, fire, or injury. Ensure proper grounding to prevent electrical hazards. Keep children and pets away from the outdoor unit.
2. Product Overview
The TURBRO Greenland GL9K115 is a high-efficiency ductless mini split inverter AC system designed for both cooling and heating. It features advanced inverter technology for optimal performance and energy savings.
Figure 2.1: Complete TURBRO Greenland GL9K115 Mini Split AC System
2.1 Key Features
- Powerful Heating and Cooling: Operates effectively in extreme temperatures, cooling up to 131°F and heating down to -13°F.
- High-Frequency Inverter: Enables rapid cooling in 30 seconds and heating in 60 seconds.
- Energy Efficient: Features a 24 SEER2 rating, contributing to lower electricity bills and potential federal tax credits.
- Long Distance Air Blowing: Efficiently circulates air throughout the room with a large drum-shaped impeller fan.
- Quiet Operation: Designed for low noise levels, ensuring a comfortable environment.
- Wi-Fi Enabled: Allows for convenient control via a smartphone app.
- R454B Refrigerant: Utilizes an eco-conscious refrigerant with low global warming potential.
Figure 2.2: Key Performance Features
Figure 2.3: Inverter System Performance in Extreme Weather
Figure 2.4: Refrigerant Environmental Impact Comparison
3. Setup & Installation
While the TURBRO Greenland mini split AC comes with a step-by-step installation guide and wiring diagram for DIY installation, professional installation is strongly recommended to ensure optimal performance, safety, and compliance with warranty requirements.
3.1 Package Contents
Verify that all components are present before beginning installation. The package typically includes:
- Indoor Unit
- Outdoor Unit
- Remote Control & AAA Battery
- Signal Cable
- Drain Joint & Drain Hose
- Screws & Mounting Plate
- Rubber Feet
- Guide Plate
- Refrigerant Pipe (16.4 ft.)
- Wall Sleeve
- Insulation Tape
- Sealing Gum
- User Manual
Figure 3.1: Package Contents and Delivery Information
3.2 Recommended Tools for Installation
- HVAC vacuum pump
- Set of gauges for HVAC
- Cordless drill and bits
- Hole saw
- Wrenches or crescent wrenches
- Electrical tape or Duct tape
- Line cover kit (recommended for professional appearance and protection)
3.3 General Installation Steps (Summary)
- Select Location: Choose appropriate indoor and outdoor unit locations, ensuring proper clearance and drainage.
- Mount Indoor Unit: Secure the mounting plate to the wall and install the indoor unit.
- Drill Wall Hole: Create a hole for refrigerant lines, drain hose, and electrical cables.
- Install Outdoor Unit: Place the outdoor unit on a stable, level surface or mount it securely.
- Connect Refrigerant Lines: Carefully connect the pre-flared refrigerant lines between the indoor and outdoor units. Use Nylog Blue for added security.
- Electrical Wiring: Connect the power supply and communication cables according to the wiring diagram. Ensure proper grounding.
- Vacuum and Leak Test: Evacuate the refrigerant lines using a vacuum pump and check for leaks.
- Open Service Valves: Release the refrigerant into the system.
- Drainage: Ensure the drain hose is properly sloped for condensate removal.
- Test Operation: Power on the unit and test all functions.
4. Operating Instructions
Your TURBRO Greenland GL9K115 can be controlled via the included remote control or through the dedicated Wi-Fi app.
Figure 4.1: Remote Control and Wi-Fi App Interface
4.1 Remote Control Functions
The remote control allows you to adjust temperature, change operating modes, set fan speed, and access various other features. Refer to the detailed remote control section in the printed manual for specific button functions.
4.2 Operating Modes
- Cool Mode: Provides cooling to lower the room temperature.
- Heat Mode: Provides heating to raise the room temperature.
- Dehumidify Mode: Reduces humidity in the air without significant cooling.
- Fan Mode: Circulates air without heating or cooling.
- Auto Mode: Automatically selects the appropriate mode based on the set temperature and ambient conditions.
- Sleep Mode: Adjusts temperature and fan speed for comfortable sleep and energy saving.
- Turbo Mode: Provides maximum cooling or heating power for rapid temperature change.
4.3 Wi-Fi Connectivity and App Control
The unit can be connected to your home Wi-Fi network and controlled via a smartphone app. This allows for remote operation, scheduling, and access to additional features not available on the remote control. Follow the instructions in the app to pair your device.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your mini split AC system.
5.1 Cleaning the Air Filter
The air filters in the indoor unit should be cleaned regularly (every 2-4 weeks, depending on usage) to maintain air quality and system efficiency.
- Turn off the unit and disconnect power.
- Open the front panel of the indoor unit.
- Remove the air filters.
- Clean the filters with a vacuum cleaner or wash them with lukewarm water. Allow them to dry completely before reinstallation.
- Reinstall the filters and close the front panel.
5.2 Outdoor Unit Care
Periodically inspect the outdoor unit for debris, leaves, or other obstructions that may block airflow. Keep the area around the outdoor unit clear. Clean the coil fins gently with a soft brush if they are dirty. Ensure the drain pan and drain hose are clear of blockages.
5.3 Self-Cleaning Function
The TURBRO Greenland unit features a self-cleaning function that uses high temperature (133°F) to clean the indoor coil, preventing mold and bacteria buildup. Refer to your remote control or app instructions to activate this feature.
Figure 5.1: Self-Cleaning Feature
6. Troubleshooting
This section provides solutions for common issues you might encounter. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Remote control batteries dead; Circuit breaker tripped | Check power connection; Replace batteries; Reset circuit breaker |
| Insufficient cooling/heating | Dirty air filter; Blocked outdoor unit; Incorrect mode setting; Room size exceeds capacity | Clean air filter; Clear obstructions; Select correct mode; Ensure unit matches room size |
| Water leakage from indoor unit | Clogged drain hose; Improper installation angle | Clear drain hose; Re-evaluate installation angle (professional assistance recommended) |
| Unusual noise | Loose parts; Fan obstruction; Refrigerant flow noise (normal) | Inspect for loose parts; Remove obstructions; Consult manual for normal operating sounds |
| Wi-Fi connection issues | Incorrect Wi-Fi password; Router too far; App not updated | Verify password; Move router closer or use extender; Update app; Re-pair device |
7. Specifications
Detailed technical specifications for the TURBRO Greenland GL9K115 Mini Split AC.
Figure 7.1: Product Dimensions
| Feature | Specification |
|---|---|
| Model Number | GL9K115 |
| Cooling Power | 9,000 BTU |
| Heating Function | Yes (Heat Pump) |
| SEER2 Rating | 24 |
| Voltage | 115 Volts |
| Wattage | 710 watts |
| Coverage Area | Up to 450 Sq. Ft. |
| Refrigerant Type | R454B |
| Noise Level | 27 Decibels (Indoor Unit) |
| Indoor Unit Dimensions (DxWxH) | 7.7 x 32.3 x 12.1 inches |
| Outdoor Unit Dimensions (DxWxH) | 12.0 x 28.7 x 21.7 inches (approximate based on image) |
| Item Weight | 91.8 pounds |
| Special Features | Dehumidifier, Fast Cooling, Inverter Compressor, WiFi Enabled |
8. Warranty & Support
8.1 Warranty Information
The TURBRO Greenland GL9K115 Mini Split AC system includes a 5-year standard coverage for both parts and compressors. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the warranty card included with your product or visit the official TURBRO website.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact TURBRO customer support. Contact information can typically be found on the product packaging, the official TURBRO website, or within the included documentation.
