1. Introduction
This manual provides essential information for the safe and efficient use of your Anker Nano Charger (100W). Please read these instructions thoroughly before operating the device and retain them for future reference.
The Anker Nano Charger delivers up to 100W of power, designed for rapid charging of compatible devices. Its compact, foldable design enhances portability, while advanced safety features ensure device protection.
2. What's in the Box
- Anker Nano Charger (100W)
- 6 ft USB-C Cable
- Welcome Guide
- 24-month Warranty Card
Image: Anker Nano Charger (100W) and included 6ft USB-C Cable.
3. Setup
- Unfold the Prongs: Gently extend the foldable prongs from the charger body.
- Connect to Power Outlet: Insert the charger into a standard wall power outlet. Ensure it is securely seated.
- Connect USB-C Cable: Plug one end of the provided 6ft USB-C cable into the USB-C port on the charger.
- Connect to Device: Plug the other end of the USB-C cable into the charging port of your compatible device.
Image: The Anker Nano Charger features foldable prongs for secure and stable connection to a wall outlet.
4. Operating Instructions
The Anker Nano Charger is designed for high-speed charging. Once connected, it will automatically begin charging your device at the optimal speed supported by both the charger and your device.
- 100W Max Output: The charger can deliver up to 100W of power, capable of charging a 14-inch MacBook Pro to 50% in approximately 27 minutes.
- Single Port Design: This charger features a single USB-C output port, ensuring dedicated power delivery to the connected device.
Image: The Anker Nano Charger provides 100W maximum output, enabling rapid charging for devices like the MacBook Pro.
5. Safety Features
Your Anker Nano Charger incorporates advanced safety technologies to protect your devices:
- ActiveShield 2.0: This technology intelligently monitors temperature over 3 million times per day. It dynamically adjusts power output to prevent overheating and safeguard connected devices.
- Over-Voltage Protection: Prevents damage from excessive voltage input.
- Short-Circuit Prevention: Protects against electrical shorts.
Image: ActiveShield 2.0 technology provides real-time temperature monitoring and power adjustment for enhanced safety.
6. Compatibility
The Anker Nano Charger (100W) is compatible with a wide range of USB-C devices:
- Phones: iPhone 16 / 15 Series, Samsung S24 / S23 / S22 / S21 Series. (For iPhone 14 / 13 / 12 Series, a Lightning cable is required, not included).
- Laptops: MacBook Pro M3 / M2 / M1 Series, MacBook Air M3 / M2 / M1 Series.
- Tablets: iPad Pro 11" / 12.9" / 13".
- Compatible with 25W MagSafe Charger.
Image: The charger supports a broad range of USB-C devices, including smartphones, tablets, and laptops.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | A2679 |
| Product Dimensions | 1.61 x 1.14 x 2.36 inches |
| Item Weight | 4.2 ounces |
| Color | White |
| Input Voltage | 240 Volts |
| Amperage | 1.2 Amps |
| Total USB Ports | 1 (USB Type C) |
| Special Feature | Fast Charging |
8. Troubleshooting
- Device not charging: Ensure the charger is securely plugged into a live power outlet. Verify the USB-C cable is properly connected to both the charger and your device. Try using a different cable or outlet to rule out issues.
- Slow charging: Confirm your device supports fast charging. Ensure the cable used is rated for high-speed charging. Some devices may limit charging speed if they are in active use or if their battery is nearly full.
- Charger feels warm: It is normal for the charger to become warm during operation, especially during high-power charging. ActiveShield 2.0 technology is designed to manage temperature and prevent overheating. If the charger becomes excessively hot or emits smoke/unusual odors, disconnect it immediately and contact customer service.
9. Warranty and Support
The Anker Nano Charger (100W) comes with a 24-month warranty. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in your Welcome Guide or visit the official Anker support website.
