EazeID LT12 Label Maker Machine User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your EazeID LT12 Label Maker. Please read this manual thoroughly before using the device and retain it for future reference.

2. Contents Checklist

Verify that all items listed below are included in your package:

• 1 × EazeID LT12 Handheld Labeler
• 1 × PZ Label Tape (12mm × 4M)
• 1 × Type-C Cable
• 1 × User Manual
• 1 × Quick Start Guide
• 1 × Colorful Packaging Box

Figure 2.1: Package Contents of the EazeID LT12 Label Maker.

3. Parts Description

Familiarize yourself with the components of your EazeID LT12 Label Maker:

Figure 3.1: Front view of the EazeID LT12 Label Maker.

• LCD Screen: Displays text, settings, and preview of labels. Features a backlight for visibility in low-light conditions.
• QWERTY Keyboard: For efficient text input.
• Power Button: Turns the device on or off.
• Print Button: Initiates the label printing process.
• Clear Button: Clears text or settings.
• Delete Button: Deletes characters one by one.
• Esc Button: Exits current menu or operation.
• OK Button: Confirms selections.
• Navigation Buttons: Used to move the cursor and navigate menus.
• Settings Button: Accesses device settings.
• Insert Button: Inserts symbols, units, or date.
• Format Button: Changes label size, style, borders, alignment, and vertical printing.
• File Button: Saves or opens labels.
• Shift Key: Used in combination with other keys for uppercase letters, numbers, and symbols.
• Caps Lock: Toggles uppercase/lowercase input.
• A/a Button: Switches between uppercase and lowercase characters.
• Accented Characters Button: Accesses accented characters.
• Space Bar: Inserts a space.
• Type-C Port: For charging the device.
• Flashing Indicator: Shows charging status and other notifications.
• Reset Button: Resets the device (use a pin to press).
• Cutter: Manually cuts the printed label.
• Label Exit: Where the printed label emerges.
• Tape Cassette Compartment Cover: Protects the tape cassette.

4. Setup

4.1 Charging the Device

The EazeID LT12 Label Maker is powered by a robust 1200mAh lithium battery. Use the provided Type-C cable to charge the device. The power indicator light will go out once fully charged.

Figure 4.1: Rechargeable feature of the LT12 with Type-C port.

4.2 Installing the Tape Cassette

1. Open the tape cassette compartment cover.
2. Ensure that the end of the tape passes through the tape guide.
3. Install the tape cassette firmly into the compartment.
4. Pull out a section of the label about 1 inch (3cm) from the paper outlet.
5. Close the tape cassette compartment cover.

Figure 4.2: Proper installation of the tape cassette.

4.3 Initial Settings

Before first use, or if you need to adjust settings, follow these steps:

• Language: Press Settings → [Language] → OK → Select a language → OK. By default, the language is set to English. The machine comes with 23 built-in languages.
• Feed: Press Settings → [Feed] → OK. This feeds a small amount of tape.
• Bluetooth: Press Settings → [Bluetooth] → OK → [ON] → OK. By default, Bluetooth is off.
• Label Length: Press Settings → [Label Length] → OK → Select a value → OK. Auto adjusts label length to text. You can also manually set the length.

5. Operating Instructions

5.1 Text Entry

Use the QWERTY keyboard for efficient text input. The backlit LCD screen ensures clear visibility.

Figure 5.1: Backlit LCD screen and QWERTY keyboard for easy text entry.

5.2 Inserting Symbols and Date

To enhance your labels, you can insert various symbols and the current date:

• Symbols: Press Insert → [Symbols] → OK → Select a category → OK → Select a symbol → OK.
• Date: Press Insert → [Date] → OK → Choose a date format → OK.

5.3 Formatting Labels

Customize the appearance of your labels using the Format menu:

• Press Format to access options.
• Size: Adjust the length of the label (Auto, Small, Medium, Large).
• Style: Adjust the style of the font (Normal, Bold, Italic, Bold&Italic).
• Borders: Select a decorative frame to add to your label.
• Alignment: Adjust text format (Align Left, Align Center, Align Right).
• Vertical: Set up vertical printing (ON/OFF).

5.4 Saving and Opening Labels

You can save your labels for future use and access them later to edit and print them.

• Save: Press File → [Save] → OK → Select a save destination → OK. You can save up to 9 files, each with a maximum of 100 characters.
• Open: Press File → [Open] → OK → Select a saved file → OK.

5.5 Text Editing

Edit your text efficiently with these functions:

• New Line: Press A/a to start a new line. The maximum number of lines for 0.47" (12 mm) tape width is three lines.
• Delete Text and Format:
  1. Delete one by one: Use the Delete button.
  2. Delete one character at a time: Use the Delete button.
  3. Delete all characters: Press Clear → [Text Only] → OK.
• Upper-Case & Lower-Case: Press A/a to switch between uppercase and lowercase characters.
• Accented Characters: Select text you wish to convert to accented characters, then press A&N → Select a value → OK.

5.6 Shift Key Operations

By using the Shift key combination, the following operations can be performed:

1. Insert numbers and symbols: Press and hold Shift when pressing a letter or number key to type an uppercase letter or the symbol marked on the number key.
2. Multiple Editing: Allows editing multiple labels sequentially.
3. Multiple Printing: Select 1-9 print copies.
4. Quickly locate the initial and final positions of text: Use Shift + Navigation buttons.

5.7 App Connection and Features

Connect your LT12 Label Maker to the "Print Master" app via Bluetooth for extended customization options.

1. Download the "Print Master" app from your device's app store.
2. Ensure Bluetooth is enabled on your label maker and smartphone.
3. Open the app and connect to the LT12 printer.
4. Utilize the app to access 1600+ icons, 163 fonts, and 287 border styles.
5. Generate and print barcodes or QR codes directly through the app for inventory management or tracking.

Figure 5.2: Bluetooth connection and app usage for the LT12 Label Maker.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your label maker.

6.1 Cleaning the Print Head

If print quality degrades (e.g., faint lines, missing dots), clean the print head:

1. Turn off the label maker.
2. Open the tape cassette compartment cover.
3. Gently wipe the print head with a cotton swab lightly moistened with isopropyl alcohol.
4. Allow the print head to dry completely before closing the cover and resuming use.

6.2 Cleaning the Cutter

If labels are not cut cleanly, the cutter blade may have adhesive residue:

1. Turn off the label maker.
2. Open the tape cassette compartment cover.
3. Carefully use a dry cotton swab to remove any visible adhesive or debris from the cutter blade. Avoid touching the blade directly with your fingers.
4. Close the cover.

6.3 Storage

Store the label maker in a cool, dry place away from direct sunlight and extreme temperatures. Remove the tape cassette if the device will not be used for an extended period.

7. Troubleshooting

If you encounter issues with your EazeID LT12 Label Maker, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

Your EazeID LT12 Label Maker comes with a limited warranty. For specific warranty details, please refer to the documentation included in your product packaging or contact EazeID customer support.

Product support is included with your purchase. If you have any questions, require assistance, or need to report an issue, please contact the seller directly through the Amazon platform. The seller, Eazeid, aims to provide quick responses and support within 24 hours.

To contact the seller on Amazon:

1. Go to the product page on Amazon.
2. Click on the seller's name (Eazeid).
3. Click the "Ask a question" button to send a message.

Figure 9.1: How to contact the seller on Amazon for support.