Introduction
The Fender Telepath Wireless System provides clear, full-frequency wireless audio for musical instruments. It operates on the 5.8GHz frequency band to minimize interference and offers features like auto-pairing, an articulating input plug, and an active/passive switch for broad compatibility. This manual provides essential information for setting up, operating, and maintaining your Telepath Wireless System.
Key Features
- 5.8GHz digital wireless signal transmission
- 70-foot transmission range
- Compatible with active and passive instruments
- Four concurrent channels and multi-unit pairing
- Low 4ms of latency retains natural playing feel
Package Contents
The Fender Telepath Wireless System typically includes:
- 1 x Telepath Wireless Transmitter (Black)
- 1 x Telepath Wireless Receiver (Mystic Ice Blue)
- 1 x Dual USB Charging Cable
- User Manual (this document)
Image: The Telepath Wireless System units in black and mystic ice blue, alongside the included dual USB charging cable.
Setup
- Charging the Units: Before first use, fully charge both the transmitter and receiver using the provided dual USB charging cable. Connect the cable to a standard USB power adapter (not included). The LED indicator will show charging status.
- Connecting the Transmitter: Plug the transmitter unit (black) into your instrument's output jack. The articulating plug allows for various instrument jack orientations.
- Connecting the Receiver: Plug the receiver unit (mystic ice blue) into your amplifier's input, pedalboard, or audio interface.
- Power On and Pairing: Press and hold the Power/Sync button on both units for approximately 2 seconds until the LED indicators illuminate. The units will automatically pair within seconds. A solid green LED indicates a successful connection.
Image: Close-up view of the black transmitter and mystic ice blue receiver units, showing the input jacks and power/sync buttons.
Image: The black Telepath transmitter unit plugged into the output jack of an electric guitar, demonstrating its compact fit.
Operating Instructions
Active/Passive Switch
Both the transmitter and receiver units feature an Active/Passive switch. This switch allows the system to accommodate instruments with different output levels, such as active pickups (higher output) or passive pickups (standard output).
- Active: Select this setting for instruments with active pickups or preamps, which typically have a higher output signal.
- Passive: Select this setting for instruments with passive pickups, which have a lower output signal.
Note: Ensure both the transmitter and receiver are set to the appropriate position (Active or Passive) to match your instrument and prevent signal clipping or weak signal.
Image: Side view of the black and mystic ice blue Telepath units, highlighting the Active/Passive switch and USB-C charging port.
Cable Tone Simulation
The Telepath Wireless System includes built-in cable tone simulation. This feature is designed to replicate the subtle tonal characteristics and capacitance of a traditional instrument cable, providing a more natural feel and sound that musicians are accustomed to. This ensures your tone remains consistent whether you're wired or wireless.
Multi-Unit Pairing
The system supports multi-unit pairing, allowing you to use up to four Telepath systems concurrently without interference. This is ideal for bands with multiple wireless instruments or for quick instrument changes during a performance.
- Ensure all units are powered off.
- Power on the first pair (transmitter and receiver) and allow them to pair.
- Once the first pair is stable, power on the second pair and allow them to pair. Repeat for up to four pairs.
- The system automatically manages channels to prevent crosstalk.
Maintenance
Charging
The Telepath Wireless System units are powered by internal rechargeable batteries.
- Use the provided dual USB charging cable to charge both units simultaneously.
- Connect the cable to a standard USB power source (e.g., computer USB port, USB wall adapter).
- A red LED indicates charging, and it will turn green when fully charged.
- Battery life can last for several hours of continuous use.
Cleaning
To clean the units, wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.
Storage
When not in use for extended periods, store the units in a cool, dry place. It is recommended to fully charge the units before long-term storage and to recharge them every few months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound / No Connection | Units not powered on; Not paired; Low battery; Incorrect Active/Passive setting. | Ensure both units are powered on and fully charged. Press the Sync button to re-pair. Check Active/Passive switch matches instrument. |
| Interference / Dropouts | Other 5.8GHz devices nearby; Obstructions; Exceeding range. | Move away from other wireless devices (Wi-Fi routers, microwaves). Ensure clear line of sight between units. Stay within the 70-foot range. |
| Latency (Delay in Sound) | Excessive distance between units; Environmental interference. | Reduce distance between transmitter and receiver. Minimize obstructions. |
| Poor Tone / Clipping | Incorrect Active/Passive setting. | Ensure the Active/Passive switch on both units is correctly set for your instrument's output type. |
Specifications
- Frequency Band: 5.8GHz
- Transmission Range: Up to 70 feet (line of sight)
- Latency: Low 4ms
- Channels: Supports up to four concurrent systems
- Compatibility: Active and Passive instruments
- Battery: Rechargeable internal battery
- Item Weight: 8 ounces
- Product Dimensions: 6.4 x 6.35 x 2.25 inches
- Model Number: 0239780001
- Color: Mystic Ice Blue and Black
Warranty and Support
For warranty information and technical support, please refer to the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.
Online Support: www.fender.com/support
Customer Service: Refer to the contact information provided on the Fender website for your region.
Important Safety Information
Please read all safety warnings and instructions before using the Telepath Wireless System.
- Do not expose units to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or modify the units. This will void the warranty.
- Use only the provided charging cable.
- Keep out of reach of children.
- Dispose of batteries responsibly according to local regulations.
