1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Leadfan Android 12 Car Radio. This unit is specifically designed for Jeep Patriot and Jeep Compass models manufactured between 2010 and 2016. It features a 10.1-inch touchscreen, Android 12 operating system, Wireless CarPlay, Android Auto, GPS navigation, Bluetooth 5.1, Wi-Fi connectivity, and support for a backup camera. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Professional Installation Recommended: Due to the complexity of vehicle electrical systems, professional installation is highly recommended. Incorrect installation can damage the vehicle's electrical system or the product.
- Power Disconnection: Always disconnect the vehicle's battery negative terminal before beginning any installation work to prevent electrical shorts and damage.
- Wiring: Ensure all wiring connections are secure and properly insulated to prevent short circuits. Refer to the wiring diagram provided in the included user manual.
- Driving Safety: Do not operate the device in a manner that distracts you from driving. Always prioritize road safety.
- Compatibility: This unit is not compatible with vehicles equipped with JBL or other premium audio systems, OEM cameras, or factory large screens. Verify your vehicle's specifications before installation.
3. Package Contents
Verify that all items listed below are included in your package:
- 1x Car Touch Screen Radio Unit
- 1x GPS Antenna
- 1x Backup Camera
- 1x Rear View Input Cable
- 1x RCA Cable
- 2x USB Cables
- 1x Power Cable
- 1x Antenna Connector Cable
- 1x CanBus Decoder
- 1x User Manual (Printed)
Image: All components included in the Leadfan Android 12 Car Radio package, including the main head unit, backup camera, GPS antenna, and various connection cables.
4. Setup and Installation
4.1 Pre-installation Checks
- Confirm your vehicle is a Jeep Patriot or Compass model from 2010-2016.
- Ensure your vehicle does not have a JBL or other premium audio system, an OEM camera, or a factory large screen, as these are not compatible.
- Gather all necessary tools for installation (e.g., screwdrivers, wire strippers, electrical tape).
4.2 Wiring Connections
The provided wiring harness is designed for plug-and-play installation for compatible vehicles. Refer to the detailed wiring diagram in the included user manual for specific connections. Key connections include:
- Power Cable: Connects to the vehicle's power supply.
- RCA Cables: For audio output and auxiliary input.
- USB Cables: For connecting external USB devices.
- Antenna Connector Cable: For radio signal reception.
- GPS Antenna: Connect for navigation functionality. Position in a location with clear sky view.
- Backup Camera Input: Connect the backup camera cable. The pink wire from the power cable connects to the reversing trigger cable, and the camera's power connects to the car's reversing light positive and negative terminals.
- CanBus Decoder: Connect the CanBus decoder as instructed to enable steering wheel controls and other vehicle data integration.
Image: Wiring diagram for the backup camera, illustrating how to connect it to the car radio and the vehicle's power system.
4.3 Physical Installation
- Carefully remove the factory radio unit from your vehicle's dashboard.
- Connect all necessary cables from the new Leadfan unit to the vehicle's wiring harness, ensuring secure connections.
- Mount the new car radio unit into the dashboard opening. Ensure it is securely fastened.
- Reconnect the vehicle's battery negative terminal.
- Power on the unit and perform initial function tests.
Image: Before and after installation comparison, demonstrating the seamless integration of the new 10.1-inch car radio into the Jeep Patriot/Compass dashboard.
5. Operating Instructions
5.1 Power On/Off and Touchscreen Navigation
- Power On: The unit will power on automatically when the vehicle's ignition is turned on.
- Power Off: The unit will power off automatically when the vehicle's ignition is turned off.
- Touchscreen: The 10.1-inch IPS touchscreen supports multi-touch gestures. Navigate through menus and applications by tapping, swiping, and pinching.
5.2 Wireless CarPlay & Android Auto
Connect your smartphone wirelessly to access navigation, music, calls, and messages directly on the car radio display.
- Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
- On the car radio, open the CarPlay or Android Auto application.
- Follow the on-screen prompts to pair your phone via Bluetooth. Once paired, the system will establish a Wi-Fi connection for CarPlay/Android Auto functionality.
- Use voice commands (e.g., "Hey Siri" or "OK Google") for hands-free operation.
Image: Visual representation of Apple CarPlay and Android Auto operating on the car radio, showing app icons and voice command prompts.
5.3 Mirror Link
Mirror your smartphone's screen onto the car radio display.
- iOS Devices: Supports wireless connection. Follow the instructions in the Mirror Link app on the radio.
- Android Devices: Supports both wireless and wired connections. For wired connection, use a USB cable.
5.4 GPS Navigation
The unit comes with a built-in GPS navigation system supporting both offline and online maps.
- Online Maps: Connect to Wi-Fi or a mobile hotspot to use real-time navigation with updated map data.
- Offline Maps: Download maps for your region to use navigation without an internet connection.
Image: GPS navigation display with route information and map views, alongside a Wi-Fi connection screen.
5.5 Bluetooth 5.1
Enable Bluetooth on the car radio and your smartphone to pair devices.
- Hands-Free Calling: Make and receive calls directly from the car radio.
- Audio Streaming: Play music from your smartphone through the car's speakers.
5.6 FM Radio
Access the FM Radio application to listen to local radio stations.
- Tuning: Use the touchscreen controls to scan for stations or manually tune to a specific frequency.
- Presets: Save your favorite stations for quick access.
5.7 Steering Wheel Controls (SWC)
After correct wiring and CanBus connection, you can configure the steering wheel buttons to control the car radio.
- Go to the 'Settings' menu on the car radio.
- Select 'Steering Wheel Controls' or 'SWC Learning'.
- Follow the on-screen instructions to assign functions to each button on your steering wheel.
5.8 Wi-Fi Connection
Connect the unit to a Wi-Fi network or mobile hotspot to access online features, download apps, and update software.
- Go to 'Settings' > 'Network & Internet' > 'Wi-Fi'.
- Select your desired Wi-Fi network and enter the password if required.
5.9 Backup Camera
The included backup camera provides a clear view of the area behind your vehicle when reversing.
- When the vehicle is shifted into reverse gear, the car radio display will automatically switch to the backup camera view.
- The camera features a 170° wide-angle lens, IP68 waterproof rating, and night vision for optimal visibility.
5.10 EQ Settings
Adjust the audio equalizer settings to customize your listening experience.
- Access the 'EQ' or 'Sound Settings' menu.
- Adjust frequency bands, balance, and fader settings to your preference.
6. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronics. Do not use abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates via the Wi-Fi connection in the system settings to ensure optimal performance and access to new features.
- General Care: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Incorrect power wiring; Blown fuse; Vehicle battery issue | Check power cable connections; Inspect vehicle fuses; Verify vehicle battery charge. |
| No sound output | Incorrect speaker wiring; Volume too low; Mute activated | Verify speaker connections; Increase volume; Check if mute is active. |
| GPS not acquiring signal | GPS antenna improperly placed or disconnected | Ensure GPS antenna is connected and placed in a location with a clear view of the sky. |
| CarPlay/Android Auto not connecting | Bluetooth/Wi-Fi off on phone; Incorrect pairing process | Enable Bluetooth/Wi-Fi on phone; Re-attempt pairing process as per section 5.2. |
| Steering Wheel Controls not working | CanBus not connected; SWC learning not performed | Check CanBus connection; Perform SWC learning as per section 5.7. |
| Backup camera not displaying | Camera wiring incorrect; Reverse trigger not connected | Verify backup camera and reverse trigger wiring as per section 4.2. |
If you encounter issues not listed here or require further assistance, please refer to the 'Warranty and Support' section for contact information.
8. Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 12 |
| RAM / ROM | 2GB RAM / 32GB ROM (4-core) |
| Display Size | 10.1 Inches |
| Display Type | 2.5D IPS Touch Screen |
| Connectivity | Bluetooth 5.1, Wi-Fi, USB |
| Special Features | Wireless CarPlay, Wireless Android Auto, Mirror Link, GPS Navigation, SWC, Backup Camera Support |
| Audio Output Mode | Stereo |
| Mounting Type | Dashboard Mount |
| Item Weight | 4.31 pounds |
| Package Dimensions | 16.89 x 12.64 x 7.68 inches |
9. Warranty and Support
Your Leadfan Android 12 Car Radio comes with the following support and warranty:
- 30-Day Free Return: Eligible for returns within 30 days of purchase.
- 12-Month Replacement: A 12-month replacement policy is provided for quality-related issues.
- Lifetime Technical Support: Receive lifetime technical support for your product. Inquiries are typically answered within 24 hours.
- Customer Service: For technical support or any questions, please contact the seller directly. On the product page, locate "sold by Nideo" and click "ask a question" to reach customer support.
