Product Overview
The Comfort Zone Indoor Tower Space Heater, Model CZ12828, is designed to provide efficient radiant heat for indoor spaces. Featuring dual quartz tubes, it delivers quick warmth and includes fan-assisted heat distribution. This heater is equipped with user-friendly controls and advanced safety features for reliable operation.
Image: The Comfort Zone Tower Space Heater in operation, showing the radiant heating elements glowing.
Important Safety Instructions
Please read all instructions before using this heater to reduce the risk of fire, electric shock, or injury. Keep this manual for future reference.
- Overheat Protection: The heater is equipped with a built-in sensor that automatically turns off the unit if it reaches an unsafe temperature level.
- Tip-Over Switch: An integrated safety switch automatically shuts off the heater if it is accidentally knocked over, helping to prevent fire hazards.
- Stay-Cool Handle: The molded handle and housing are designed to remain cool during operation, allowing for safe transport of the unit.
- ETL Approved: This product meets recognized safety standards.
Image: Visual representation of the heater's intelligent safety features, including overheat sensor, tip-over switch, stay-cool handle, and ETL approval.
Setup and Placement
The Comfort Zone Tower Space Heater requires no assembly and is ready for immediate use. Ensure the heater is placed on a stable, level surface.
- Place the heater in a location where it can effectively warm the desired area, such as a living room, bedroom, or home office.
- Maintain a safe distance from walls, furniture, and other combustible materials.
- Ensure the power cord is not obstructed or placed under rugs.
Image: The heater positioned in a room, illustrating its suitability for various small indoor spaces like living rooms, bedrooms, and offices.
Image: A diagram showing the compact dimensions of the heater, emphasizing its space-saving design and readiness for use without assembly.
Operating Your Heater
The heater features two top-mounted control knobs for easy adjustment of heat settings and thermostat.
Controls
- Thermostat Knob: Adjust the desired room temperature by turning the left knob. The heater will cycle on and off to maintain the set temperature.
- Heat Mode Select Knob: Use the right knob to select between 'OFF', 'LOW' (750W), and 'HIGH' (1500W) heat settings.
Image: A detailed view of the heater's top panel, highlighting the two control knobs for thermostat adjustment and heat mode selection.
Heat Settings
Choose between two power outputs to suit your heating needs:
- LOW (750W): Provides a lower heat output for smaller areas or maintaining warmth.
- HIGH (1500W): Delivers maximum heat output for faster warming of larger spaces.
Image: The heater demonstrating its instant and powerful heat, with an overlay indicating the 750W and 1500W output options.
Care and Maintenance
Regular cleaning and proper storage will ensure the longevity and efficient operation of your heater.
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water or liquids enter the interior of the heater.
- For storage, keep the heater in a cool, dry place when not in use.
Troubleshooting
If your heater is not operating as expected, please refer to the following common issues and solutions:
- Heater does not turn on:
- Check if the power cord is securely plugged into a working electrical outlet.
- Ensure the heat mode select knob is set to 'LOW' or 'HIGH', not 'OFF'.
- Verify that the thermostat knob is set to a temperature higher than the current room temperature.
- Check if the tip-over switch has been activated (if the unit was moved or tilted). Place the heater upright on a stable surface.
- Heater is not producing heat:
- Confirm the heat mode is set to 'LOW' or 'HIGH'.
- Adjust the thermostat to a higher setting.
- Ensure the overheat protection has not been triggered. Unplug the unit, let it cool for 10-15 minutes, then plug it back in.
Product Specifications
| Feature | Specification |
|---|---|
| Brand | Comfort Zone |
| Model Number | CZ12828 |
| Special Feature | Bladeless, Cool Touch Exterior, Fast Heating, Lightweight, Manual Thermostat |
| Color | Black |
| Form Factor | Tower |
| Indoor/Outdoor Usage | Indoor |
| Product Dimensions | 13.66"D x 8.54"W x 24.69"H |
| Recommended Uses | Home, Office |
| Mounting Type | Freestanding |
| Room Type | Bedroom, Dining Room, Home Office, Study Room |
| Heating Coverage | 250 sq. ft. |
| Burner Type | Radiant |
| Fuel Type | Electric |
| Number of Speeds | 2 |
| Voltage | 120 Volts |
| Amperage | 12.5 Amps |
| Max Temperature Setting | 86 Degrees Fahrenheit |
| Item Weight | 6.2 pounds |
| Assembly Required | No |
| Batteries Required | No |
Warranty and Customer Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Comfort Zone website. Keep your purchase receipt for warranty claims.
For additional assistance, you may contact the manufacturer, Mr. Brands, LLC.
Additional Product Information
Explore more about Comfort Zone heating solutions:
Video: An overview of the Comfort Zone Heater Line-Up, showcasing various heating solutions from the brand.
