Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Perlegear Floor TV Stand with Mount PGFS13. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold flat or curved TVs ranging from 32 to 86 inches, with a maximum weight capacity of 132 lbs (60 kg) and VESA mounting patterns from 100x100 mm to 600x400 mm.
Image: The Perlegear Floor TV Stand PGFS13, showcasing its design and capacity for large televisions.
Important Safety Information
Please read all instructions carefully before assembly. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service. Improper assembly or installation may cause damage or serious injury.
- Weight Capacity: Do not exceed the maximum weight capacity of 132 lbs (60 kg). Ensure your TV's weight, including accessories, is within this limit.
- TV Size and VESA: This stand is compatible with TVs from 32 to 86 inches and VESA patterns from 100x100 mm to 600x400 mm. Verify your TV's specifications before proceeding.
- Component Check: Before installation, ensure all components are present and undamaged. Do not use damaged parts.
- Assembly: Assemble the product according to the instructions provided. Do not modify the structure or use accessories not specified by the manufacturer.
- Stability: Ensure the stand is placed on a stable, level surface to prevent tipping.
- Children: Keep children away from the assembly area. Small parts may be a choking hazard.
Specifications
| Brand | Perlegear |
| Model Number | PGFS13 |
| Compatible TV Sizes | 32 - 86 inches |
| Maximum Load Capacity | 132 lbs (60 kg) |
| VESA Mounting Patterns | 100x100 mm to 600x400 mm |
| Material | Alloy Steel, Wooden Base |
| Swivel Angle | ±30° |
| Tilt Angle | +5° / -10° |
| Height Settings | 6 adjustable height settings (Min 36.46", Max 46.30") |
| Product Weight | 38.1 lbs |
| Package Dimensions | 35 x 20 x 6 inches |
Image: Visual representation of the TV stand's wide compatibility, showing supported TV sizes, VESA patterns, and maximum load capacity.
Setup Instructions
Follow these steps to assemble your Perlegear Floor TV Stand. It is recommended to have two people for safe assembly, especially when handling the TV.
Step 1: Connect the Brackets to the Support Bars
Attach the horizontal support bars to the TV brackets using the provided screws. Ensure they are securely fastened.
Image: Diagram illustrating the connection of TV brackets to the support bars, a crucial first step in assembly (from installation video).
Step 2: Attach the TV Brackets to Your TV
Select the appropriate TV bolts and spacers for your television. Depending on your TV's back panel (flat, curved, or with a bump), choose the correct mounting option. Securely attach the assembled brackets to the back of your TV. Ensure the horizontal support bars are centered on the back of your TV; adjust if needed using the 5/32" (4mm) Allen key.
Image: Detailed diagrams demonstrating how to attach the TV brackets to different TV back panel types, including guidance on selecting appropriate bolts and spacers (from installation video).
Step 3: Connect the Support Pillar to the Base
Attach the main support pillar to the wooden base using the provided bolts and the 3/16" (5mm) Allen key. Ensure the pillar is firmly secured to the base. The support pillar offers 7 height options for initial setup.
Image: Illustration of connecting the support pillar to the base, highlighting the use of bolts and the available height options for the pillar (from installation video).
Step 4: Hang the TV
Carefully lift your TV (with brackets attached) and hang it onto the support pillar. Secure the TV to the pillar using the safety screws and the 5/32" (4mm) Allen key. This step requires at least two people for safety.
Image: Visual guide for hanging the television onto the assembled stand and securing it for stability (from installation video).
Step 5: Attach the Shelf to the Support Pillar
Attach the adjustable shelf to the support pillar at your desired height using the provided screws and the 5/32" (4mm) Allen key.
Image: Instructions for attaching the adjustable shelf to the main support pillar (from installation video).
Step 6: Attach the Pegboard Hooks
Insert the pegboard hooks into the designated holes on the support pillar to create storage for accessories like game controllers.
Image: The Perlegear TV stand's integrated pegboard with hooks, demonstrating its use for organizing accessories.
Installation Video Guide
For a visual guide on the assembly process, please watch the official installation video below.
Video: Official installation guide for the Perlegear Floor TV Stand PGFS13, demonstrating each assembly step.
Operating Instructions
Height Adjustment
The TV stand features six post height settings for optimal viewing comfort. To adjust the height, locate the intuitive tool-less knobs on the back of the support pillar. Twist the knobs to loosen, lift or lower the TV to the desired height, and then twist to tighten the knobs securely. The height can be adjusted between a minimum of 36.46 inches and a maximum of 46.30 inches.
Image: Visual guide for adjusting the TV stand's height using the twist-and-lift mechanism.
Image: A user enjoying ergonomic viewing comfort, demonstrating the adjustable height feature of the TV stand.
Swivel Adjustment
The TV stand allows for a ±30° swivel, enabling you to adjust the TV to your desired viewing angle. If the swivel feels stiff, slightly loosen the bolts on the swivel mechanism, adjust the angle, and then retighten them securely using the 3/16" (5mm) Allen key.
Image: Comprehensive view of the TV stand's adjustment capabilities, including swivel, leveling, and tilt functions.
Image: An overhead perspective illustrating the TV stand's swivel function, allowing for flexible viewing angles in a room.
Tilt Adjustment
The TV mount includes a tool-free tilt function, allowing for a +5° to -10° tilt. Simply rotate the orange button on top of the panel to make tilt adjustments. This helps in avoiding glare and maximizing viewing comfort. If the tilt is difficult to adjust, slightly loosen the bolt on one side, adjust, and then retighten on both sides. If the tilt does not hold, fully tighten the bolt on the other side.
Image: Comprehensive view of the TV stand's adjustment capabilities, including swivel, leveling, and tilt functions.
Cable Management
Utilize the integrated cable management clips and channels on the support pillar to neatly route and conceal your TV and media device cables. This helps maintain a tidy appearance and prevents cable clutter.
Image: Illustration of the cable management system, demonstrating how to route and secure cables along the stand's pillar (from installation video).
Smart Storage with Pegboard and Shelf
The adjustable shelf and pegboard provide convenient storage for your remote controls, media devices, game controllers, and other accessories. Arrange the pegboard hooks as needed to organize your living space.
Image: The Perlegear TV stand's integrated pegboard with hooks, demonstrating its use for organizing accessories.
Maintenance
Regular maintenance ensures the longevity and safe operation of your TV stand.
- Cleaning: Clean the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Stability Check: Ensure the stand remains stable and level. Adjust if any wobbling occurs.
- Cable Management: Regularly check cable routing to ensure no cables are pinched or under excessive tension.
Troubleshooting
- TV is not level: Use the 5/32" (4mm) Allen key to adjust the leveling screws on the TV brackets until the TV is level.
- Difficulty swiveling the TV: Slightly loosen the bolts on the swivel mechanism, adjust the TV to the desired angle, and then retighten the bolts using the 3/16" (5mm) Allen key.
- TV tilt does not hold: Ensure the orange tilt adjustment button is fully tightened. If it still doesn't hold, slightly loosen the bolt on one side, adjust, and then retighten both sides.
- Stand feels unstable: Verify that all assembly screws are securely tightened. Ensure the stand is on a flat, level surface.
Warranty and Support
Perlegear products are designed for durability and performance. For any questions, concerns, or assistance with your Perlegear Floor TV Stand PGFS13, please contact Perlegear customer support. Please refer to your purchase documentation for specific warranty details.
You can visit the official Perlegear store for more information: Perlegear Store
