Introduction
This manual provides instructions for the setup, operation, and maintenance of your KU XIU X23 PRO Magnetic Wireless Charging Stand. Please read this manual thoroughly before use to ensure proper functionality and safety.
Image: The KU XIU X23 PRO Magnetic Wireless Charging Stand, featuring a wood grain finish and a sleek design, shown with its accompanying power adapter.
Package Contents
Verify that all items are present in the package:
- X23 Pro 3-in-1 Wireless Charger (1 unit)
- 30W Fast Charging Adapter (1 unit)
- Charging Cable (1 unit)
- User Manual (this document)
Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Connect Power: Insert the provided charging cable into the USB-C port on the back of the X23 PRO charging stand. Connect the other end of the cable to the 30W Fast Charging Adapter.
- Plug In: Plug the 30W Fast Charging Adapter into a standard wall outlet. The LED indicator light on the stand will illuminate, indicating it is powered on and ready for use.
Image: Detailed view of the charging stand's features, including the LED indicator light, the silicone charging panel designed to prevent scratches, and the thickened anti-slip base for stability.
Operating Instructions
The KU XIU X23 PRO is designed to charge up to three devices simultaneously:
- Magnetic Charging Pad (Vertical): For MagSafe-compatible iPhones (iPhone 12 series and newer).
- Apple Watch Charging Module: For Apple Watch Series 11–4, SE, and Ultra models.
- Flat Wireless Charging Pad (Base): For AirPods (with wireless charging case) or other Qi-compatible smartphones.
Charging Your iPhone
Place your MagSafe-compatible iPhone directly onto the vertical magnetic charging pad. The magnets will align your device automatically. You can charge your iPhone in both portrait and landscape orientations.
Image: The charging stand in use, demonstrating an iPhone charging in portrait mode while positioned in an office, bedroom, kitchen, and during exercise, highlighting its versatility.
Charging Your Apple Watch
Place your Apple Watch onto the dedicated charging module on the base. Ensure the watch is properly seated for charging to begin.
Charging Your AirPods or Other Qi Device
Place your AirPods (with wireless charging case) or any other Qi-compatible smartphone onto the flat wireless charging pad located on the base of the stand.
Image: A detailed view of the three distinct charging zones on the KU XIU X23 PRO: the magnetic pad for MagSafe-compatible iPhones, the recessed area for Apple Watch, and the flat Qi pad for AirPods or other Qi-enabled smartphones.
Adjusting the Phone Holder
The magnetic phone holder can be adjusted to find the optimal viewing angle. It supports both portrait and landscape orientations for hands-free usage, such as video viewing or video calls.
Image: An illustration demonstrating the adjustable angle of the phone holder, allowing for optimal viewing in both portrait and landscape modes.
Maintenance
- Cleaning: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the charging stand. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the charging stand in a cool, dry place away from direct sunlight and moisture.
- Cable Care: Avoid bending or crimping the charging cable excessively to prevent damage.
Troubleshooting
| Problem | Solution |
|---|---|
| Device not charging. |
|
| Slow charging. |
|
| Stand feels warm during charging. | This is normal during wireless charging. The stand is designed with heat dissipation features. If it becomes excessively hot, disconnect power and contact support. |
| Apple Watch not charging. |
|
Specifications
| Model Number | X23 PRO |
| Brand | KU XIU |
| Product Dimensions | 6.5 x 2.83 x 5.98 inches |
| Item Weight | 1.1 pounds |
| Connectivity Technologies | MagSafe, Wireless (Qi) |
| Input Voltage | 5 Volts |
| Amperage | 3 Amps |
| Total USB Ports | 1 (USB Type C for power input) |
| Special Features | Charging Indicator, Magnetic, MagSafe Compatible, Short Circuit Protection, Wireless Charging, Over-temperature protection, Over-current protection, Over-voltage protection |
| Compatible Devices | iPhone, Apple Watch, AirPods (with wireless charging case), Qi-compatible smartphones |
| Compatible Phone Models | iPhone 17 / 17 Pro / 17 Pro Max / iPhone Air, iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max, iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max, iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max, iPhone 13 / 13 mini / 13 Pro / 13 Pro Max, iPhone 12 / 12 mini / 12 Pro / 12 Pro Max |
| Compatible Apple Watch Models | Apple Watch Series 11–4, SE / SE 2 / SE 3, Ultra / Ultra 2 / Ultra 3 |
| Compatible AirPods Models | AirPods Pro (3 / 2 / 1), AirPods (4th / 3rd / 2nd gen) including MagSafe and Wireless Charging Cases |
| Manufacturer | Shenzhen KUXIU Communication Co., Ltd |
| Color | Wood Grain |
Image: An infographic detailing the integrated safety mechanisms of the charging stand, including protection against over-temperature, over-current, over-voltage, and short-circuits.
Warranty Information
For warranty details and claims, please refer to the information provided with your purchase or contact KU XIU customer support. Keep your proof of purchase for warranty service.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact KU XIU customer support through the retailer where you purchased the product or visit the official KU XIU website for contact information.
Online Resources:
- KU XIU Store on Amazon: Visit Store