WONLINK WiFi Extender Signal Booster User Manual

1. Introduction

The WONLINK WL-NE3501 WiFi Extender Signal Booster is designed to expand your existing Wi-Fi network coverage, eliminating dead zones and providing a stronger, more reliable internet connection throughout your home or office. This dual-band (5G/2.4G) device offers speeds up to 1200Mbps, making it ideal for HD video streaming, online gaming, and general browsing across multiple devices.

Image: The WONLINK WiFi Extender extending network coverage across a home environment.

2. Package Contents

Please verify that all items are present in your package:

• 1 x WONLINK WiFi Booster
• 1 x User Manual
• 1 x RJ45 Networking Cable

3. Key Features

• High-Speed Dual Band: Supports 802.11ac wireless standard with combined speeds up to 1200Mbps (867Mbps on 5GHz and 300Mbps on 2.4GHz).
• Four High-Gain Antennas: Equipped with four external antennas for enhanced signal reception and transmission, ensuring wider coverage.
• WPS 1-Tap Setup: Simplifies the setup process for quick connection to your existing router.
• Ethernet Port: Includes a 10/100 Mbps RJ45 Ethernet port for stable wired connections to devices like smart TVs, PCs, or gaming consoles.
• Multiple Operating Modes: Functions as a WiFi Repeater, Access Point (AP), or Router.
• Wide Coverage: Extends Wi-Fi coverage up to 120m² and supports over 25 connected devices.
• Advanced Security: Supports WPA, WPA2, WPA-PSK, and WPA2-PSK encryption protocols for secure network access.
• MU-MIMO Technology: Optimizes network utilization by communicating with multiple wireless terminals simultaneously.

Image: High performance and ultra-stable 1200Mbps WiFi Repeater.

Image: Dual-band WiFi speeds with 4 antennas for improved signal.

Image: Ethernet port for stable wired network connections.

Image: Illustration of high gain antennas for better signal.

4. Setup Guide

4.1. WPS 1-Tap Setup (Recommended)

1. Plug the WONLINK WiFi Extender into a power outlet near your main router.
2. Wait for the Power LED on the extender to turn solid blue.
3. Press the WPS button on your main router.
4. Within 2 minutes, press the WPS button on the WONLINK WiFi Extender.
5. The Signal LED on the extender should turn solid blue, indicating a successful connection.
6. Once connected, you can unplug the extender and move it to a location between your router and the Wi-Fi dead zone. Ensure the Signal LED remains blue for optimal performance.

4.2. Manual Setup (Via Web Browser)

1. Plug the WONLINK WiFi Extender into a power outlet.
2. Connect your computer or mobile device to the extender's default Wi-Fi network (e.g., "WONLINK_EXTENDER" or similar, usually found on a label on the device).
3. Open a web browser and enter the default IP address (e.g., 192.168.10.1) or web address (e.g., wifi.repeater) provided in the full user manual.
4. Follow the on-screen instructions to log in (default username/password is usually "admin").
5. Select your desired operating mode (Repeater, AP, or Router) and follow the prompts to connect to your existing Wi-Fi network or set up a new one.

5. Operating Modes

The WONLINK WL-NE3501 offers versatile operating modes to suit various networking needs:

• Repeater Mode: Extends the range of your existing wireless network, eliminating Wi-Fi dead zones. This is the most common use case.
• Access Point (AP) Mode: Converts a wired network connection into a wireless one. Ideal for creating a new Wi-Fi hotspot from an Ethernet port.
• Router Mode: Functions as a basic router, creating a private network from a DSL or cable modem.

Image: Diagram illustrating Repeater Mode and AP/Router Mode options.

6. Performance and Coverage

This extender is designed to provide robust performance:

• Speed: Up to 1200Mbps combined (867Mbps on 5GHz, 300Mbps on 2.4GHz).
• Coverage: Extends Wi-Fi signal up to 120 square meters (approximately 1300 sq ft).
• Device Support: Capable of supporting 25+ devices simultaneously.

Image: Visual representation of the extender providing wide coverage in a multi-room environment.

Image: Illustration showing the extender's best-in-class signal range compared to a router alone.

7. Network Security

The WONLINK WL-NE3501 supports robust security protocols to protect your network:

• WPA (Wi-Fi Protected Access)
• WPA2 (Wi-Fi Protected Access II)
• WPA-PSK (Wi-Fi Protected Access - Pre-Shared Key)
• WPA2-PSK (Wi-Fi Protected Access II - Pre-Shared Key)

Image: Visual representation of the extender's compatibility and advanced security features.

8. Troubleshooting

If you encounter issues with your WONLINK WiFi Extender, please refer to the following common solutions:

• No Signal or Weak Boost:

  Ensure the extender is placed within the effective range of your main router. While the extender can extend a signal, it cannot significantly boost an already very weak or non-existent signal from the source. Place it where your router's signal is still moderately strong (e.g., 2-3 signal bars) to effectively extend it further.

  Consider the layout of your home. Thick walls, concrete, and other electronic devices can interfere with Wi-Fi signals. Try repositioning the extender to minimize obstructions.

• Slow Speed After Setup:

  While extenders improve coverage, they can sometimes introduce latency or reduce maximum throughput. Ensure the extender is not too far from the main router, as this can result in a weak connection to the router, leading to slow extended speeds.

  Verify that your main router is providing adequate speed. The extender's performance is limited by the speed of the original signal.
• WPS Setup Issues:

  Ensure you press the WPS button on both the router and the extender within the specified time frame (usually 2 minutes). Some routers may require direct access or a specific sequence for WPS to function correctly. If WPS fails, try the manual web browser setup method.

• Cannot Access Setup Page:

  Ensure your device is connected to the extender's default Wi-Fi network (not your main router's network) before attempting to access the setup page via IP address or web address.

  Clear your browser's cache and cookies, or try a different web browser.
• Factory Reset:

  If issues persist, perform a factory reset. Locate the reset button (often a small pinhole) on the extender, press and hold it for 5-10 seconds until the lights flash, then release. This will revert the extender to its default settings, allowing you to reconfigure it.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or further assistance, please visit the official WONLINK store or contact their customer service through the platform where you purchased the product.

You can find more information and support resources at the WONLINK Store on Amazon.