Introduction
Thank you for choosing the AIKE AK1213-1 Automatic Wall Mount Liquid Soap Dispenser. This device is designed for hygienic and convenient liquid soap dispensing in various environments, including home and commercial bathrooms. It features IPX7 waterproofing and adjustable dispensing levels for optimal use. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your product.
Important Notes
- This dispenser is designed exclusively for liquid soap. It is not suitable for foaming soap, and the dispenser does not produce foam.
- The dispenser requires 4 AA batteries for operation (batteries are not included).
- Ensure the installation surface is clean, dry, and flat for optimal adhesive performance.
What's Included
Please verify that all components are present in the package:
- Soap Dispenser x 1
- Mounting Plate x 1
- Nail-free Glue x 1
- Wall Anchor x 2
- Screw x 2
- User Manual x 1
Image: Contents of the AIKE AK1213-1 package.
Setup and Installation
Before installation, ensure to clear all obstructions beneath the dispenser. The recommended installation height is greater than 20cm (8 inches) for ordinary countertops and greater than 30cm (12 inches) for reflective countertops.
Image: Recommended installation height for the dispenser.
Installation Options
The AIKE AK1213-1 offers two installation methods: drill-free with adhesive or screw mounting.
Image: Visual guide for both nail-free glue and screw installation.
Method 1: Drill-Free (Nail-Free Glue)
- Clean and Dry Surface: Wipe the wall surface clean and ensure it is completely dry.
- Apply Glue: Apply the provided nail-free glue to the back of the mounting plate.
- Attach Mounting Plate: Press the mounting plate firmly against the wall in the desired location and hold for at least 10 seconds.
- Cure Time: Allow the glue to cure for a minimum of 48 hours before hanging the dispenser. This ensures a secure bond.
Method 2: Screw Installation
- Mark Holes: Hold the mounting plate against the wall at the desired location and mark the positions for drilling.
- Drill Holes: Use a drill to create holes at the marked positions.
- Insert Anchors: Gently tap the hollow wall anchors into the drilled holes until flush with the wall surface.
- Install Mounting Plate: Align the mounting plate with the anchors and secure it to the wall using the provided screws.
Installation Guidance Video
Video: Step-by-step guide for installing the AIKE AK1213-1 Automatic Soap Dispenser using both drill-free and screw methods.
Operating Instructions
Battery Installation
The dispenser requires 4 AA batteries. The battery compartment is designed with a watertight gasket to protect against spills and wet conditions, ensuring long-term use.
Image: Battery compartment with watertight gasket.
Filling the Dispenser
The dispenser features a transparent reservoir and a wide opening for easy refilling and monitoring of liquid levels. Simply open the top and pour in your preferred liquid soap.
Image: Easy filling of the dispenser.
Adjusting Dispense Levels
The AIKE AK1213-1 offers 5 precise dispensing levels, allowing you to adjust the amount of soap dispensed according to your needs, from a gentle flow for handwashing to a more powerful stream for other cleaning tasks.
Image: 5 levels of precise dispensing.
Maintenance
The AIKE AK1213-1 is IPX7 waterproof, ensuring reliable sensing in humid environments and allowing for worry-free rinsing. Regular cleaning of the exterior with a soft, damp cloth is recommended to maintain its appearance. Avoid using abrasive cleaners.
Image: IPX7 Waterproof feature.
Waterproof Test Demonstration
Video: A demonstration of the AIKE AK1213-1's IPX7 waterproof capabilities, showing it functioning while submerged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not dispensing soap | Low battery, empty reservoir, clogged nozzle, incorrect soap type. | Replace batteries, refill reservoir, clean nozzle, ensure liquid soap is used. |
| Dispenser light not working | Low battery, sensor obstruction. | Replace batteries, clean sensor area. |
| Dispenser falls off wall (if using glue) | Insufficient curing time, unsuitable wall surface (not clean, dry, or flat). | Re-apply glue with proper curing time (48+ hours) on a suitable surface, or use screw installation. |
Specifications
- Model Number: AK1213-1
- Color: Brushed Stainless Steel
- Material: Acrylonitrile Butadiene Styrene (ABS), Stainless Steel
- Product Dimensions: 3.2"L x 3.7"W x 7.5"H
- Liquid Volume: 400 Milliliters (approximately 13.5 oz)
- Item Weight: 1.17 pounds
- Waterproof Rating: IPX7
- Power Source: 4 AA Batteries (not included)
- Dispensing Levels: 5 adjustable levels
Warranty and Support
The AIKE AK1213-1 Automatic Wall Mount Liquid Soap Dispenser comes with a 1-year manufacturer warranty. If you encounter any issues with your dispenser or require assistance, please contact AIKE customer support. We are dedicated to providing excellent service and ensuring your satisfaction.
For more information or support, please visit the official AIKE Store: AIKE Store on Amazon