JUMMICO Electric Height Adjustable Standing Desk User Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your JUMMICO Electric Height Adjustable Standing Desk, Model 0183. Please read this manual carefully before use to ensure safe and efficient operation. Keep this manual for future reference.

Figure 1: JUMMICO Electric Height Adjustable Standing Desk (100 x 60 cm, Grey)

Important Safety Information

• Ensure all components are securely fastened before use.
• Keep children and pets away from the desk during height adjustment.
• Do not overload the desk beyond its specified weight capacity (up to 70 kg).
• The motor system is equipped with anti-collision and overheating protection features. If an obstruction is detected during adjustment, the desk will stop and slightly reverse.
• Only use the provided power adapter and cables.

Package Contents

Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Refer to the assembly video for a visual guide to all included parts and hardware.

Setup and Assembly

Assembly typically takes approximately 30 minutes. Follow these steps carefully:

Step 1: Assemble the Crossbar

Connect the two halves of the crossbar (B9) using the provided screws (f M4). Ensure they are aligned correctly.

Figure 2: Assembling the crossbar (B9).

Step 2: Attach Legs to Crossbar

Attach the desk legs (B1, B2) to the assembled crossbar (B9) using screws (a). Ensure the motor is correctly positioned on one side.

Figure 3: Securing legs (B1, B2) to the crossbar (B9).

Step 3: Install Side Brackets

Secure the side brackets (B8) to the top of the legs and crossbar using screws (a) and the M5 wrench (f).

Figure 4: Attaching side brackets (B8) to the frame.

Step 4: Attach Feet to Legs

Attach the feet (B7) to the bottom of each leg using screws (b) and the M5 wrench (f). Ensure they are firmly tightened for stability.

Figure 5: Securing the desk feet (B7).

Step 5: Assemble Desktop Panels

The desktop consists of multiple panels (B3, B4, B5, B6). Connect them using the wooden dowels (e) and metal plates (B14, B15) with screws (c) and the M4 wrench (f). Ensure a seamless fit.

Figure 6: Joining desktop panels (B3, B4, B5, B6) with dowels and plates.

Step 6: Attach Desktop to Frame

Carefully place the assembled desktop onto the desk frame. Align the pre-drilled holes and secure the desktop to the frame using screws (d) and the M4 wrench (f).

Figure 7: Securing the desktop to the assembled frame.

Step 7: Install Drive Rod

Insert the drive rod (B10) into the motor mechanism and connect it to the other leg, ensuring a snug fit. This rod synchronizes the movement of both legs.

Figure 8: Inserting the drive rod (B10) into the motor.

Step 8: Mount Control Panel

Mount the control panel (B16) to the underside of the desktop using screws (d). Connect the motor cable to the control panel.

Figure 9: Control panel (B16) installation and cable connection.

Step 9: Connect Power Adapter

Connect the power adapter (B17) to the control panel and then to a power outlet.

Figure 10: Power adapter (B17) connection.

Step 10: Cable Management

Use the provided cable ties (g) to organize and secure all cables neatly under the desk. This helps maintain a tidy workspace and prevents cables from interfering with desk movement.

Figure 11: Using cable ties (g) for cable management.

Step 11: Install Headphone Hook

Attach the headphone hook (B12) to the underside of the desktop in a convenient location using the provided screws. This provides a dedicated spot for your headphones or bags.

Figure 12: Attaching the headphone hook (B12).

Step 12: Install Cable Pass-Through

Insert the cable pass-through (B13) into the pre-drilled hole on the desktop. This allows for neat routing of monitor and peripheral cables.

Figure 13: Inserting the cable pass-through (B13).

Operating Instructions

The JUMMICO Electric Height Adjustable Standing Desk offers easy and intuitive control for a personalized workspace.

Control Panel Functions

Figure 14: Detailed view of the control panel.

• LED Display: Shows the current desk height in centimeters.
• UP/DOWN Buttons: Press and hold to continuously adjust the desk height between 73 cm and 118 cm. Release to stop.
• Memory Buttons (1, 2):
  1. Adjust the desk to your desired height.
  2. Press the 'M' button, then press '1' or '2' to save the current height to that memory preset.
  3. To recall a saved height, simply press '1' or '2'.
• Timed Reminders: The control panel may include a timer function to remind you to switch between sitting and standing positions. Consult the specific control panel instructions for activation.
• USB Charging Port: Located on the side of the control panel, this port allows for convenient charging of mobile devices.

Height Adjustment and Ergonomics

The desk allows for seamless transitions between sitting and standing positions, promoting a healthier work routine. The height is continuously adjustable from 73 cm to 118 cm.

Figure 15: Desk height range from 73 cm (sitting) to 118 cm (standing).

Anti-Collision Function

The desk is equipped with an anti-collision sensor. If the desktop encounters an obstruction during upward or downward movement, it will automatically stop and reverse slightly to prevent damage or injury. This feature ensures safe operation in dynamic environments.

Maintenance

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the surface.
• Cable Management: Periodically check cable routing to ensure they are not pinched or tangled, especially during height adjustments.
• Fasteners: Occasionally check all screws and bolts to ensure they remain tight. Retighten if necessary.
• Motor Care: The motor system is designed for durability. Avoid spilling liquids directly onto the motor or control panel.

Troubleshooting

If you encounter any issues with your JUMMICO standing desk, please refer to the following common solutions:

• Desk Not Moving:
  • Check if the power cable is securely connected to both the desk and the wall outlet.
  • Ensure the motor cable is properly connected to the control panel.
  • If the desk has been idle for a long time, try unplugging it for 30 seconds and then plugging it back in to reset the system.
• Uneven Movement:
  • Verify that the drive rod (B10) is correctly installed and fully engaged in both leg mechanisms.
  • Ensure the desk is placed on a level surface.
• Anti-Collision Triggering Frequently:
  • Check for any objects under or above the desk that might be obstructing its path.
  • Ensure cables are neatly managed and not hanging in the path of the desk's movement.
• Noise During Operation:
  • A low operating noise (below 55 dB) is normal. If the noise is excessive, check all connections and fasteners for tightness.

If the issue persists, please contact JUMMICO customer support for further assistance.

Specifications

Figure 16: Desk frame tested for durability and stability with up to 60kg load.

Warranty and Support

JUMMICO provides a worry-free guarantee for this product. For any questions, concerns, or assistance with your Electric Height Adjustable Standing Desk, please contact JUMMICO customer support through the retailer where you purchased the product. Please have your model number (0183) and purchase details ready when contacting support.