iDance K2V2 Karaoke Wireless Party Speaker User Manual

Introduction

Thank you for choosing the iDance K2V2 Karaoke Wireless Party Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Image: The iDance K2V2 Karaoke Wireless Party Speaker in pink, shown with its included microphone and a child enjoying the karaoke experience.

Safety Information

• Do not expose the device to water or excessive moisture.
• Avoid placing the device near heat sources or in direct sunlight.
• Use only the provided power cable for charging.
• Do not attempt to disassemble or modify the device.
• Keep out of reach of small children.
• Ensure proper ventilation during use.

Package Contents

Verify that all items are present in the package:

• iDance K2V2 Karaoke Wireless Party Speaker
• Wired Microphone
• Power Cable
• User Manual (this document)

Product Overview

Familiarize yourself with the components of your iDance K2V2 speaker.

Image: Front view of the iDance K2V2 speaker, highlighting key features such as disco lighting, control panel, microphone input, and carrying handle.

Image: The iDance K2V2 speaker with a tablet securely placed in its integrated dock, displaying song lyrics for karaoke.

Control Panel Features:

• MP3 Player Controls: Play/Pause, Next/Previous Track.
• Volume Knob: Adjusts master volume.
• Microphone Input: For connecting the wired microphone.
• USB Port: For MP3 playback from USB drives.
• AUX Input: For connecting external audio devices.
• Charging Indicator: Shows battery status.
• Power Switch: Turns the unit on or off.
• Echo Effect Knob: Adjusts microphone echo.
• Microphone Sensitivity Knob: Adjusts microphone volume.

Setup

1. Charging the Speaker

1. Connect the provided power cable to the charging port on the speaker.
2. Plug the other end of the power cable into a standard wall outlet.
3. The charging indicator light will illuminate. Allow 4-8 hours for a full charge.
4. Once fully charged, disconnect the power cable.

2. Connecting the Microphone

1. Locate the microphone input jack on the speaker's control panel.
2. Insert the microphone cable securely into the jack.
3. The speaker supports two microphone inputs for duet singing.

3. Powering On/Off

• To power on, slide the Power Switch to the "ON" position.
• To power off, slide the Power Switch to the "OFF" position.

Operating Instructions

1. Bluetooth Connection

1. Power on the K2V2 speaker. It will automatically enter Bluetooth pairing mode.
2. On your smartphone, tablet, or other Bluetooth device, enable Bluetooth and search for available devices.
3. Select "iDance K2V2" from the list of devices.
4. Once paired, the speaker will emit a confirmation sound, and you can stream audio wirelessly.

2. USB Playback

1. Insert a USB flash drive containing MP3 audio files into the USB port on the speaker.
2. The speaker will automatically detect the USB drive and begin playing the MP3 files.
3. Use the MP3 Player controls (Play/Pause, Next/Previous) on the speaker to manage playback.

3. AUX Input

1. Connect an external audio device (e.g., MP3 player, phone) to the AUX input port using a 3.5mm audio cable (not included).
2. The speaker will automatically switch to AUX mode.
3. Control playback and volume from your connected device.

4. Microphone Usage and Effects

• Microphone Volume: Adjust the "MIC SENSITIVITY" knob to control the microphone's input volume.
• Echo Effect: Turn the "ECHO EFFECT" knob to add or remove an echo effect to your vocals.
• The speaker supports two microphones for duet performances.

5. Disco Lighting

The K2V2 speaker features integrated RGB disco lighting around the woofer. This lighting automatically activates when the speaker is powered on, adding a visual element to your music.

6. Sharing Mode (Connecting Two K2V2 Speakers)

The Sharing Mode allows you to connect two K2V2 speakers wirelessly to play audio from a single Bluetooth device for a stereo experience.

1. Ensure both K2V2 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press and hold the "Sharing Mode" button (refer to product overview image for location).
3. The primary speaker will search for the secondary speaker. Once connected, both speakers will emit a confirmation sound.
4. Now, connect your Bluetooth device to the primary speaker as described in the "Bluetooth Connection" section. Audio will play through both speakers.

7. Tablet/Phone Docking

The speaker includes a built-in dock to securely hold your smartphone or tablet, providing a convenient display for lyrics or video during karaoke sessions.

Maintenance

Cleaning

• Wipe the speaker's exterior with a soft, dry cloth.
• Do not use abrasive cleaners, waxes, or solvents.
• Ensure no liquids enter the speaker's openings.

Storage

• Store the speaker in a cool, dry place away from direct sunlight.
• If storing for an extended period, charge the battery periodically to maintain its lifespan.

Troubleshooting

Specifications

Image: Side view of the iDance K2V2 speaker with approximate height, width, and depth measurements indicated.

Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official iDance website. Keep your proof of purchase for any warranty claims.