Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your GLOBE Electric Motion Activated Outdoor Integrated LED Flood Light Security Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The GLOBE Electric 17000204 Twin Head LED Flood Light, designed for outdoor security lighting.
Product Features
- Motion Activated: Detects motion from all angles up to 50 feet (15 meters) with a 240° detection zone. Adjustable shut-off times of 1, 5, or 20 minutes.
- MotionBright 2-Level Lighting: Provides constant low ambient lighting when no motion is detected, transitioning to full brightness upon motion detection for energy efficiency and enhanced security.
- High Light Output: Delivers 2200 lumens of daylight white (4000 Kelvin) light for bright and even illumination.
- Dual Mount System: Supports both wall mount and eave mount installations, with all necessary hardware included. The fixture can be rotated for desired positioning.
- Weather Resistant: Constructed from durable, outdoor-rated materials to withstand various weather conditions.
Key features of the security light, including adjustable settings and durable construction.
Demonstration of the MotionBright feature, providing two levels of illumination based on motion.
Setup and Installation
The GLOBE Electric Flood Light is designed for easy installation with its Dual Mount system. Ensure power is turned off at the circuit breaker before beginning any electrical work.
Installation Steps:
- Install the mounting bar onto your existing junction box.
- Attach the mounting plate securely to the mounting bar.
- Connect the electrical wiring according to local electrical codes.
- Attach the fixture to the mounting plate using the center bolt.
- Adjust the lamp heads and motion sensor to your desired angles.
Simplified installation steps for the flood light.
Mounting Options:
The fixture can be installed as either a wall mount or an eave mount. Simply rotate the canopy to switch between the two orientations.
Illustrations of wall mount and eave mount configurations, along with adjustable lamp heads.
Operating Instructions
After installation, you can configure the motion sensor and lighting settings to suit your needs.
Adjustable Settings:
- On Time: Set the duration the light stays on after motion detection (1, 5, or 20 minutes). A "Test" mode is available for initial setup.
- Sensitivity (Sens): Adjust the motion sensor's detection range (Low, Medium, High).
- Brightness: Control the brightness level of the ambient light when no motion is detected (Low, High).
- MotionBright: Select between OFF, Dusk to Dawn, or 6 Hour modes for the MotionBright feature. The photocell ensures night-only operation.
Detailed view of the control dials for customizing light operation.
Maintenance
The GLOBE Electric Flood Light is designed for durability and minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.
- Cleaning: Periodically wipe the fixture with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Inspection: Annually inspect the wiring and mounting hardware for any signs of wear or damage. Ensure all connections remain secure.
- LED Longevity: The integrated LED lights are designed for long life and do not require bulb replacement.
The light is weather-resistant, suitable for outdoor environments.
Troubleshooting
If you experience issues with your flood light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty wiring, photocell detecting daylight. | Check circuit breaker. Verify wiring connections. Ensure installation location is dark enough for photocell to activate. |
| Light stays on constantly. | Motion sensor sensitivity too high, continuous motion, MotionBright setting. | Adjust sensitivity dial to a lower setting. Ensure no continuous motion in detection zone. Check MotionBright setting. |
| Light turns on and off frequently. | Intermittent motion, sensor obstruction, power fluctuations. | Clear any obstructions from sensor's view. Adjust sensitivity. Consult an electrician if power fluctuations are suspected. |
| Motion detection range is poor. | Sensor angle incorrect, sensitivity too low, environmental factors. | Adjust sensor angle. Increase sensitivity. Consider environmental factors like extreme temperatures or large objects. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | GLOBE |
| Model Number | 17000204 |
| Light Source Type | Integrated LED |
| Brightness | 2200 Lumens |
| Color Temperature | 4000 Kelvin (Daylight White) |
| Wattage | 22 Watts |
| Voltage | 120 Volts |
| Motion Detection Angle | 240 Degrees |
| Motion Detection Range | Up to 50 feet (15 meters) |
| Power Source | Hardwired |
| Material | Plastic |
| Color | Black |
| Product Dimensions | 6.7"L x 8.3"W x 7.9"H (approx. 17cm L x 21cm W x 20cm H) |
| Item Weight | 1.65 pounds (approx. 0.75 kg) |
| Installation Type | Wall Mount / Eave Mount |
| Weather Resistance | Outdoor Rated, Water Resistant |
Product dimensions for planning installation space.
Warranty and Support
Warranty Information:
This GLOBE Electric Flood Light (Model 17000204) is backed by a 3-year manufacturer's limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact GLOBE Electric customer support. Refer to the product packaging or the official GLOBE Electric website for the most current contact information.
Note: Do not attempt to repair the integrated LED components yourself. This may void the warranty and pose a safety risk.
