Introduction
Thank you for choosing the WOLTU SKS37hbr Lounge Armchair. This manual provides essential information for the safe assembly, operation, and maintenance of your new armchair. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
Warning: Do not exceed the recommended maximum weight of 150 kg (330 lbs). Follow the assembly instructions precisely for safe and secure setup. Ensure all screws and fasteners are tightened correctly before use. Regularly check for loose parts and tighten as necessary. Keep small parts away from children during assembly.
Package Contents
Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Metal Frame Components (legs, armrests, back support)
- Seat Cushion
- Back Cushion
- Assembly Hardware (screws, washers, Allen key)
- Adjustable Non-slip Pads
- Instruction Manual
Setup and Assembly
Assembly is straightforward and can be completed quickly by following these illustrated instructions. It is recommended to assemble the armchair on a soft, clean surface to prevent scratches.
Step 1: Unpack Components
Carefully remove all parts from the packaging. Lay them out on a clean, flat surface and compare them with the package contents list to ensure everything is present.
Image: All components laid out, showing the metal frame and cushions.
Step 2: Assemble the Metal Frame
Connect the main metal frame components using the provided screws and Allen key. Ensure all connections are secure but do not overtighten initially. The frame is designed for high stability and a load capacity of 150kg.
Image: Detail of the robust metal frame construction.
Step 3: Attach Non-slip Pads
Install the adjustable non-slip pads to the bottom of the chair legs. These pads help keep the chair balanced, prevent slipping, and protect your floor from scratches.
Image: Adjustable non-slip pads attached to the chair's base.
Step 4: Place Cushions
Position the seat and back cushions onto the assembled frame. The cushions are fully padded with high-density foam for comfort and durability.
Image: The armchair fully assembled with cushions.
Step 5: Final Tightening
Once all parts are in place, carefully tighten all screws. Do not overtighten to avoid damaging the frame. Ensure the chair is stable before use.
Operating Instructions
The WOLTU SKS37hbr Lounge Armchair is designed for comfort and versatility. Its ergonomic design supports your body and alleviates pressure on the spine, making it ideal for various activities.
- Relaxation: Lean back and relax comfortably thanks to the inclined seat and backrest.
- Reading: Use it as a reading chair, providing a comfortable posture for extended periods.
- Entertainment: Perfect as a TV chair or a single sofa chair for enjoying movies or games.
- Versatile Placement: Suitable for living rooms, bedrooms, or as a club chair, complementing various interior styles with its clear silhouette and medieval charm.
Image: Ergonomic design features and suggested uses like reading or relaxing.
Care and Maintenance
Proper care will extend the life and appearance of your WOLTU SKS37hbr Lounge Armchair.
- Cleaning the PU Upholstery: The faux leather upholstery is wear-resistant and easy to clean. For general cleaning, wipe with a soft, damp cloth. For spills, immediately blot with a clean, dry cloth. Use a mild soap solution for stubborn stains, then wipe with a clean, damp cloth and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Frame Care: Wipe the metal frame with a soft, dry cloth to remove dust. Avoid using abrasive materials that could scratch the finish.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability and safety.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the upholstery to fade or crack. Position the armchair away from direct sunlight or use curtains/blinds.
Image: Demonstrating the water-resistant and easy-to-clean surface of the faux leather.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly or unstable. | Screws are loose; uneven floor surface. | Ensure all assembly screws are fully tightened. Adjust the non-slip pads on the bottom of the legs to compensate for uneven flooring. |
| Cushions appear flattened or lose shape. | Prolonged use in one spot; heavy weight. | Rotate and fluff cushions regularly to maintain their shape and resilience. The high-density foam is designed to resist deformation. |
| Squeaking noises during use. | Loose connections in the metal frame. | Check and retighten all screws on the metal frame. |
Specifications
- Brand: WOLTU
- Model: SKS37hbr
- Color: Light Brown
- Material: Metal, Polyurethane (PU Faux Leather)
- Overall Dimensions (L x W x H): 70 cm x 65 cm x 80 cm (approximately 27.6 x 25.6 x 31.5 inches)
- Seat Dimensions (W x D): Approximately 62.5 cm x 55.5 cm (24.6 x 21.8 inches)
- Backrest Height: Approximately 44 cm (17.3 inches)
- Seat Height from Floor: Approximately 44.5 cm (17.5 inches)
- Weight Capacity: 150 kg (330 lbs)
- Item Weight: 8.8 kg (19.4 lbs)
- Special Features: Ergonomic design, removable cushions, adjustable non-slip pads, water-resistant upholstery.
Image: Technical drawing with all key dimensions of the armchair.
Warranty Information
WOLTU products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official WOLTU website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or encounter any issues with your WOLTU SKS37hbr Lounge Armchair, please do not hesitate to contact our customer support team. You can find contact information on our official website or through your retailer.
WOLTU Official Website: www.woltu.com
