WOLTU BH42rsw-1 Adjustable Bar Stool - Assembly and User Guide
This document provides comprehensive instructions for the assembly, use, and maintenance of the WOLTU BH42rsw-1 bar stool.
Introduction
Please read the following instructions carefully and use the product as described. If the product is passed on to a third party, include all necessary instructions.
This manual aims to provide a clear and general summary. For more detailed information or assistance, please contact customer support.
General Guidelines & Usage
Indoor Use Only: This product is designed for indoor use and should only be used by one person at a time.
Stable Placement: Place the stool on a flat, even surface. Avoid sitting on the edge of the seat to prevent tipping. ⚠️
Environmental Care: Do not expose the product to strong sunlight. Keep away from sharp objects to prevent damage. ❌
Weight Capacity: The maximum weight capacity for this product is 120 kg.
Gas Lift: Do not heat or disassemble the gas lift. For replacement or repair, seek guidance from professionals. Before installation, ensure the protective cap is removed from the gas lift. ℹ️
Floor Protection: To prevent scratches on your floor during assembly, it is recommended to place the product on a soft surface like a carpet. ?️
Proper Use: This product is intended for sitting only. Do not use it as a ladder. ?
Assembly Instructions
Before assembly, please check that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer service immediately.
Parts List:
- Part A: Screws (4 pcs)
- Part B: Gas Lift Mechanism (1 pc)
- Seat Assembly (Seat and backrest)
- Base
- Gas Lift Cylinder
- Base Cover
Assembly Steps:
- Attach the gas lift mechanism (Part B) to the underside of the seat assembly using the four screws (Part A). Ensure all screws are securely tightened. ✔️
- Place the base on a flat surface. Insert the gas lift cylinder into the center of the base.
- Carefully lower the assembled seat and mechanism onto the gas lift cylinder.
- Test the chair's height adjustment by sitting on it and operating the lever located under the seat.
After assembly, ensure all screws and components are securely fastened. If any parts become loose during use, retighten them.
Maintenance and Cleaning
PU Seat Cleaning: Clean the PU seat with a soft cloth slightly dampened with a mild detergent. Afterwards, dry with a soft, dry cloth.
Linen/Velvet Seat Cleaning: For linen or velvet seats, use a dry sponge with a mild cleaner. For velvet surfaces, to achieve a better visual effect, smooth the fabric in one direction, as stroking in different directions may result in color variations.
Warnings
Small Parts Hazard: This product contains small parts. Keep children away from the assembly process to prevent accidental swallowing. ?
Packaging Hazard: Keep packaging materials, including non-woven fabrics, plastic bags, and bubble wrap, out of reach of children, especially infants, to prevent potential hazards such as suffocation. ?
Customer Service
If you have any questions or encounter any issues, please contact our customer service team through the purchase platform where you ordered the product.
