Introduction
Thank you for choosing a Citizen watch. This manual provides essential instructions for the proper use and care of your Citizen EQ3003-50W Quartz Wrist Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Image: Citizen EQ3003-50W Quartz Wrist Watch featuring a gold-tone case, a vibrant green dial with gold-tone hour markers and hands, and a matching gold-tone mesh bracelet. The watch has a classic, elegant design.
Setup
Setting the Time
- Pull out the crown: Locate the small knob (crown) on the right side of the watch case. Gently pull it out to the first click position.
- Set the time: Rotate the crown in either direction to move the hour and minute hands to the desired time.
- Push in the crown: Once the correct time is set, push the crown back into its normal position against the watch case. This will start the watch movement.
Note: Ensure the crown is fully pushed in to maintain water resistance (if applicable) and prevent dust from entering the watch mechanism.
Operating the Watch
Your Citizen EQ3003-50W is a quartz watch, known for its accuracy and reliability. Once the time is set, the watch will operate continuously, powered by a small battery.
Timekeeping
- The watch displays hours, minutes, and seconds.
- The quartz movement ensures precise timekeeping with minimal deviation.
Maintenance
Cleaning
- Wipe the watch case and band regularly with a soft, dry cloth to remove dust and perspiration.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
Battery Replacement
- The watch is powered by a button-type battery. The typical battery life for a quartz watch is 2-3 years.
- When the battery is depleted, the watch will stop. It is recommended to have the battery replaced by an authorized Citizen service center or a qualified watch technician to ensure proper sealing and function.
Storage
When not wearing the watch, store it in a dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields.
Troubleshooting
Watch Not Running
- Check the crown: Ensure the crown is fully pushed in against the watch case. If it is pulled out, the watch will not run.
- Battery depletion: If the watch has stopped completely, the battery may be depleted. Refer to the "Battery Replacement" section under Maintenance.
- Impact or damage: If the watch has experienced a significant impact, internal components may be damaged. Seek professional repair.
For any issues not resolved by the above steps, please contact Citizen customer support or an authorized service center.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EQ3003-50W |
| Movement Type | Quartz |
| Case Diameter | 26 mm |
| Material | High quality stainless steel (case and band) |
| Dial Color | Green |
| Band Color | Gold |
| Band Type | Mesh bracelet |
| Timekeeping Accuracy | Quartz movement ensures accurate timekeeping |
| Visibility | Bold numbers on the dial offer clear visibility |
| Package Dimensions | 10.2 x 9.9 x 7.9 cm |
| Item Weight | 120 g |
Warranty Information
Citizen watches typically come with a manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of the warranty. Keep your proof of purchase for warranty claims.
For warranty service, contact an authorized Citizen service center.
Customer Support
If you have any questions or require further assistance regarding your Citizen EQ3003-50W watch, please visit the official Citizen website or contact their customer service department. Contact information can usually be found on the Citizen website or in the documentation provided with your watch.
You can also refer to the product page on Amazon.eg for additional details and seller information.
