1. Product Overview
This manual provides essential information for the proper setup, operation, and maintenance of your MAIDeSITe Electric Chair Lift Back Panel. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
The MAIDeSITe Electric Chair Lift Back Panel is a key component designed to provide back support and adjustability for an electric chair lift. It includes the backrest, an integrated motor, a push rod mechanism, a locking bar, and comfortable padding for the backrest.
Figure 1.1: Front view of the MAIDeSITe Electric Chair Lift Back Panel, showing the blue padded surface and white frame.
2. Setup and Installation
The MAIDeSITe Electric Chair Lift Back Panel requires assembly and integration with the main chair lift frame. Follow these general guidelines for installation. Specific steps may vary based on the complete chair lift model.
2.1 Unpacking
- Carefully remove all components from the packaging.
- Verify that all listed components are present: backrest with padding, motor, push rod, and locking bar.
- Inspect all parts for any signs of damage during transit. Do not proceed with assembly if any damage is observed.
2.2 Component Identification
Figure 2.1: Rear view of the back panel, illustrating the integrated motor and push rod assembly. This view is crucial for understanding the mechanical connections.
Familiarize yourself with the back panel's components. The motor and push rod are located on the rear of the panel and are responsible for the reclining function.
2.3 Attachment to Chair Lift Frame
- Align the back panel with the designated attachment points on your MAIDeSITe Electric Chair Lift frame.
- Secure the back panel using the provided hardware (screws, bolts, or clips) as per your chair lift's main assembly instructions. Ensure all connections are tight and secure.
- Connect the motor's power cable to the main chair lift's electrical system. Refer to your chair lift's wiring diagram for correct connection points.
- Verify that the locking bar engages properly once the back panel is in place.
Figure 2.2: Side profile of the back panel, showing the ergonomic design and the thickness of the foam padding for user comfort.
3. Operating Instructions
The back panel's primary function is to provide adjustable back support. Its operation is integrated with the overall control system of the MAIDeSITe Electric Chair Lift.
3.1 Adjusting the Backrest
- The back panel supports 3 reclining positions.
- Use the chair lift's remote control or integrated buttons to adjust the backrest angle.
- Press the "Recline" button to move the backrest backward, and the "Upright" button to move it forward.
- Release the button once the desired position is reached. The motor will stop, and the backrest will lock into place.
3.2 Safety Precautions During Operation
- Ensure no obstructions are behind or around the backrest when adjusting its position.
- Do not attempt to manually force the backrest into a different position; always use the electric controls.
- Keep hands and fingers clear of moving parts, especially the motor and push rod mechanism.
Figure 3.1: The MAIDeSITe Electric Chair Lift in use, showing how the back panel integrates with the full chair for user comfort and support.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your back panel.
4.1 Cleaning
- Padding: Wipe the padded surface with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals. Allow to air dry completely.
- Plastic Frame: Clean the plastic components with a damp cloth. For stubborn dirt, a mild, non-abrasive cleaner can be used.
- Motor and Mechanical Parts: Keep the motor and push rod area free from dust and debris. Use a dry cloth or soft brush to clean. Do not use liquids directly on electrical components.
4.2 Inspection
- Periodically check all screws and fasteners to ensure they are tight.
- Inspect the power cable for any signs of fraying or damage. If damaged, contact customer support for replacement.
- Ensure the push rod moves smoothly and is free of obstructions.
5. Troubleshooting
If you encounter issues with your back panel, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Backrest does not move. |
|
|
| Backrest moves slowly or with difficulty. |
|
|
| Unusual noises from back panel. |
|
|
For issues not listed above or if troubleshooting steps do not resolve the problem, please contact MAIDeSITe customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | MAIDeSITe |
| Model Number | c83be4b3-18eb-4f8e-85a2-720156df5849 |
| Product Dimensions | 28"D x 15"W x 4.8"H |
| Color | Blue |
| Back Style | Solid Back |
| Special Feature | Arm Rest (Note: This refers to the chair lift, not the back panel itself) |
| Seat Material Type | Foam |
| Pattern | Solid |
| Fill Material | Foam |
| Reclining Position Count | 3 |
| Form Factor | Recliner |
| Surface Recommendation | Hard Floor |
| Indoor/Outdoor Usage | Indoor |
| Country of Origin | China |
7. Warranty and Support
7.1 Warranty Information
MAIDeSITe products are designed for durability and performance. While specific warranty details for the back panel are not provided in this document, MAIDeSITe generally offers support and free replacement of parts for manufacturing defects. Please retain your proof of purchase for any warranty claims.
7.2 Customer Support
For any questions, technical assistance, or warranty inquiries, please contact MAIDeSITe customer support. Our team aims to reply within 24 hours.
- Seller Name: Maidesite-QB
- Contact: Refer to the seller's contact information on the purchase platform or visit the official MAIDeSITe store for support options.
- Online Store: MAIDeSITe Official Store
