URBN 10000mAh Razor Series UPR103 Power Bank User Manual

1. Introduction

Thank you for choosing the URBN 10000mAh Razor Series UPR103 Power Bank. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before use and retain it for future reference.

2. Product Overview

The URBN 10000mAh Razor Series Power Bank is designed for portable charging of various electronic devices. It features 22.5W two-way fast charging, triple output ports, and advanced safety protections.

2.1 Key Features

• 10000mAh Capacity: Provides multiple charges for smartphones and other devices.
• 22.5W Two-Way Fast Charging: Supports rapid charging for both the power bank and connected devices.
• Triple Output: Charge up to three devices simultaneously with dual Type-C PD ports and one USB-A port.
• Dual Type-C PD: Power Delivery compatible for efficient charging of modern devices.
• 12-Layer Circuit Protection: Advanced safety features to prevent overcharging, overheating, and short circuits.
• Ultra-Slim Design: Compact and portable for easy carrying.
• BIS Certified: Ensures product quality and safety standards.

2.2 What's in the Box

• 1 x URBN 10000mAh Razor Series Power Bank (Main Unit)
• 1 x USB Cable (Type-C to Lightning Input Cable)
• 1 x User Manual (This Document)
• 1 x Warranty Card

Image: The URBN 10000mAh Razor Series Power Bank, showcasing its sleek blue design and LED indicators.

Image: An infographic highlighting the power bank's key features such as 22.5W ultra-fast charging, universal compatibility, BIS certification, and 12-layer circuit protection.

3. Safety Information

To ensure safe operation and prolong the lifespan of your power bank, please observe the following safety guidelines:

• Do not expose the power bank to water, moisture, or extreme temperatures (above 45°C or below 0°C).
• Avoid dropping, hitting, or disassembling the device.
• Keep out of reach of children.
• Do not use if the power bank appears damaged, swollen, or deformed.
• Use only certified charging cables and adapters.
• Do not attempt to modify or repair the power bank yourself. Contact customer support for assistance.
• Dispose of the power bank responsibly according to local regulations.

Image: A detailed diagram showcasing the 12-layer circuit protection system, ensuring comprehensive safety for your devices.

4. Setup

Before first use, it is recommended to fully charge your URBN Power Bank.

4.1 Initial Charging

1. Connect the provided USB Type-C cable to the Type-C input/output port on the power bank.
2. Connect the other end of the cable to a compatible USB wall adapter (not included) or a computer's USB port.
3. The LED indicators on the power bank will illuminate to show the charging status. All four LEDs will be solid when fully charged.

5. Operating Instructions

5.1 Checking Battery Level

Press the power button once to check the current battery level. The LED indicators will light up:

• 1 LED: 0-25%
• 2 LEDs: 25-50%
• 3 LEDs: 50-75%
• 4 LEDs: 75-100%

5.2 Charging the Power Bank

To recharge your power bank:

1. Use a Type-C cable and connect it to the Type-C input/output port on the power bank.
2. Connect the other end to a power source (e.g., wall adapter, computer).
3. The power bank supports 22.5W fast charging for quick replenishment. A full charge typically takes approximately 6 hours with a standard charger, or faster with a compatible fast charger.

Image: Illustration of the two-way fast charging capability, demonstrating faster charging for devices and quicker recharge times for the power bank itself.

5.3 Charging Your Devices

The URBN Power Bank offers triple output for versatile charging:

1. Connect your device's charging cable to one of the available output ports on the power bank (USB-A or Type-C PD).
2. Connect the other end of the cable to your device.
3. The power bank will automatically begin charging your device.
4. For optimal fast charging, ensure your device and cable support Power Delivery (PD) or Quick Charge (QC) standards.

Image: Visual representation of the power bank's ability to charge a device to 50% in approximately 30 minutes using Power Delivery (PD).

Image: A detailed view of the power bank's top edge, highlighting the Type-C input/output ports and the USB-A output port for versatile connectivity.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the power bank. Do not use liquid cleaners or aerosols.
• Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery health, fully charge and discharge the power bank at least once every three months if not in regular use.

7. Troubleshooting

• Power bank not charging: Ensure the charging cable is securely connected to both the power bank and the power source. Try a different cable or wall adapter.
• Device not charging from power bank: Check if the power bank has sufficient charge. Ensure the cable connecting your device to the power bank is functional and properly connected. Try a different port on the power bank.
• Slow charging: Verify that your device and cable support fast charging protocols (PD/QC) if you expect rapid charging speeds. Ensure the power bank itself is adequately charged.
• LED indicators not working: If the power bank is unresponsive, try fully charging it. If the issue persists, contact customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

Your URBN 10000mAh Razor Series Power Bank comes with a 6 Months Replacement Warranty from the date of purchase. Please retain your purchase receipt and warranty card for any warranty claims. The warranty covers manufacturing defects and does not cover damage caused by misuse, accidents, or unauthorized modifications.

Image: Warranty details confirming 6 months replacement warranty, BIS approval, and 'Made in India' status.

9.2 Customer Support

For any product-related queries, technical support, or warranty claims, please contact the manufacturer:

Manufacturer: ACETRON TECH VENTURES PVT LTD
Address: Rajprabha Enclave, Building No. 6, Unit No. 111&112, 1st Floor, Bhoidapada, Sativali Road, Vasai (E) Pin code : - 401208

Please refer to the contact information provided on your warranty card for the most up-to-date support channels.