Urbn MagTag Power Bank

Product Overview

Thank you for choosing this product. The MagTag Power bank offers 15W wireless charging capabilities with support for MagSafe charging, as well as 12W wired charging. It features a Lithium polymer battery and chip to ensure a secure, efficient, and compatible charging experience for users.

Note: To start charging, press the power button [▶️] and make sure that the MagTag power bank is properly connected before continuing.

Safety Features

The power bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions.

Efficiency

The power bank can provide 15 watts of fast wireless charging and 12 watts of wired charging. Additionally, it can facilitate dual charging with a shared charging speed of up to 15W when connected to both wired and wireless devices.

Device Diagram

The power bank features the following:

• 1. Wireless Charging Indicator (Green) ?
• 2. Battery Level Indicator ?
• 3. USB-C Port for Charging and Discharging ?
• 4. Power Button [▶️]

Wireless Charging

To initiate charging, press the power button [▶️] and ensure that the MagTag power bank is securely attached before proceeding.

For devices and covers that do not support MagSafe charging, please use the MagTag ring provided in the package.

Note: MagTag charging is only compatible with devices that support wireless charging.

Note: The Magnetic function only works with MagSafe charging phones (iPhone 12 series or later) or phones with a MagSafe case.

Press the power button [▶️] to activate wireless charging.

Charging Status Indicators

Diagram: Wireless Charging Setup

Visual representation of wireless charging: A phone with a MagTag ring is placed on a wireless charging pad. Another diagram shows a phone being charged wirelessly without a ring, implying it's MagSafe compatible.

Charging the Power Bank

To charge the MagTag power bank, connect it to an adapter that supports a speed of over 10W using a Type-C cable.

Note: Type-C cable included in the box.

Diagram: Charging Methods

Visual representation of charging: One diagram shows charging a device via a cable, illustrating a phone connected to a power adapter and cable. Another diagram shows charging a device wirelessly, depicting a phone on a wireless charging pad.

Pass Through Charging

The MagTag power bank is equipped with a pass-through charging feature that enables simultaneous charging of the power bank and the phone. To utilize this feature, charge your power bank while it is connected to your phone by following the instructions on the 'Charging' page. Please ensure that the power bank is turned on by pressing the power button [▶️].

Specifications

MagTag Ring Application

Transform your wireless charging devices into MagTag charging enabled devices by adding the MagTag ring included in the box. Refer to the instructions below for proper placement of the MagTag ring.

Note: The device must have wireless charging capability. If charging through a case, ensure that the case is thin enough and attempt charging prior to attaching the MagTag ring.

Diagram: Attaching the MagTag Ring

Visual representation of applying the MagTag ring to a phone.

Important Notes

• This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
• Do not use an adapter with an output less than 5V/2A (10W).
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F ?️.
• Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.

Safety Instructions

When using this product, basic precautions should always be followed, including the following:

• Store the product in a cool, dry place.
• Do not store the product in a hot or humid environment.
• Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. ⚠️
• Operating temperature should be between 0°C to 40°C / 32°F to 104°F ?️.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
• If the product is not used for long periods of time, you should charge and discharge it once every three months. When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
• In normal conditions, the battery performance will decline over several years.
• Do not dispose of the product in heat or fire. ?
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping, or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
• Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

Contact & Support

To know more about Urbn visit our website: www.urbnworld.com

For assistance, please contact us on: support@urbnworld.com or call 1800 22 2468.

Follow us on social media: furbnworld, urbnworld