1. Introduction
Thank you for choosing the MEIKEE 70W Outdoor LED Floodlight. This product is designed to provide powerful, energy-efficient, and versatile outdoor illumination for various applications such as gardens, garages, yards, and more. Featuring a motion sensor and remote control, it offers multiple operating modes and adjustable settings for brightness, detection distance, and lighting duration. Its robust IP66 waterproof design ensures reliable performance in all weather conditions.
Image: The MEIKEE 70W Outdoor LED Floodlight, showcasing its three adjustable light heads and the included remote control.
2. Safety Instructions
Please read and understand all safety instructions before installation and operation. Keep this manual for future reference.
- Electrical Safety: This floodlight is designed with advanced insulation materials and can be safely used without a separate ground wire. However, ensure all electrical connections are made by a qualified electrician if you are unsure.
- Cable Integrity: The power cable has a cross-section of 1mm², exceeding the European standard of 0.75mm² for enhanced safety. Do not cut, damage, or modify the cable.
- Installation Environment: Ensure the installation surface is stable and can support the weight of the floodlight. Avoid installing near flammable materials or in areas with excessive vibration.
- Eye Protection: Do not stare directly into the LED light source when it is illuminated, as it can cause eye strain or damage.
- Water Resistance: The product has an IP66 rating, making it highly resistant to dust and powerful water jets. However, do not submerge the unit in water.
- Temperature: Operate the floodlight within its specified temperature range. The improved ultra-thin body design aids in heat dissipation.
- Maintenance: Disconnect power before any cleaning or maintenance.
3. Package Contents
Verify that all items are present and in good condition upon opening the package:
- 1 x MEIKEE 70W Outdoor LED Floodlight with Motion Sensor
- 1 x Remote Control (requires 2 AAA batteries, not included)
- 1 x Screw Pack (for mounting)
- 1 x User Manual (this document)
Image: Contents of the MEIKEE 70W LED Floodlight package, including the floodlight, remote control, and mounting hardware.
4. Product Overview
The MEIKEE 70W LED Floodlight features a robust design with adjustable components for optimal lighting coverage.
- Adjustable Lamp Heads: The floodlight is equipped with three adjustable lamp heads. The two smaller side heads can be adjusted 180° horizontally (left and right) and 90° vertically (up and down). The main central floodlight can be adjusted 180° vertically. This allows for a wide 270-degree illumination angle.
- Motion Sensor: A highly sensitive motion sensor is integrated below the central light head, detecting movement to activate the light in induction modes.
- Durable Construction: Made from insulating and nano materials, the floodlight is designed for durability and resistance to shocks, drops, and scratches.
- Remote Control: The included remote control provides convenient access to all functions and settings from a distance of up to 8 meters.
Image: Illustration of the 270-degree wide illumination angle provided by the adjustable lamp heads.
5. Installation
The MEIKEE LED Floodlight is designed for easy installation on walls or ceilings. Follow these general steps:
- Choose Location: Select a suitable outdoor location, such as a wall or ceiling, that provides the desired illumination area. The recommended installation height is between 5 to 7 meters for optimal coverage.
- Mark Drilling Points: Use the mounting bracket as a template to mark the drilling points on the chosen surface.
- Drill Holes: Drill holes at the marked points and insert the appropriate wall plugs (included in the screw pack).
- Mount Bracket: Secure the mounting bracket to the surface using the provided screws.
- Connect Wiring: Connect the floodlight's power cable to your electrical supply. Ensure power is off before making any connections. This product does not require a ground wire due to its double insulation.
- Attach Floodlight: Secure the floodlight unit to the mounted bracket.
- Adjust Heads: Adjust the three lamp heads to direct light to your desired areas.
Image: Diagram illustrating the recommended installation height (5-7m), detection angle (180°), and optimal illumination area (>12x12m²) for the floodlight.
Image: Visual representation of the recommended installation height for the floodlight to achieve optimal coverage.
6. Operation
The MEIKEE LED Floodlight can be operated and configured using the included remote control. Ensure 2 AAA batteries are inserted into the remote control.
6.1 Operating Modes
The floodlight offers three distinct operating modes, selectable via the remote control:
- Constant Light Mode (Mode 1): Press the ON/OFF button on the remote. The light will remain continuously on, day and night, regardless of motion detection. This mode can be used with the timing function.
- Night Induction Mode (Mode 2): After pressing the ON/OFF button, press the Moon icon button on the remote. The light will only activate when motion is detected during nighttime hours.
- 24-Hour Induction Mode (Mode 3): After pressing the ON/OFF button, press the Sun icon button on the remote. The light will activate when motion is detected, both during the day and night.
Image: Visual representation of the floodlight operating in Constant Light Mode, providing continuous illumination.
Image: Depiction of the floodlight in Night Induction Mode, activating only when motion is detected after dark.
Image: Illustration of the floodlight in 24-Hour Induction Mode, activating upon motion detection at any time of day or night.
6.2 Adjustable Settings
The remote control allows for fine-tuning of various parameters:
- Brightness Adjustment: Adjust the light output from 10% to 100% (10 levels) to suit your needs.
- Detection Distance: Set the motion sensor's detection range to 6 meters (19.68 ft), 9.6 meters (31.49 ft), or 12 meters (39.37 ft).
- Induction Lighting Time: Choose how long the light stays on after motion is detected: 45 seconds, 90 seconds, 120 seconds, 5 minutes, or 10 minutes.
Image: Remote control interface showing brightness adjustment from 10% to 100% in 10 steps.
Image: Diagram illustrating the adjustable detection distances of 6m, 9m, and 12m for the motion sensor.
Image: Remote control options for setting the induction lighting time to 45s, 90s, 120s, 5 minutes, or 10 minutes.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your MEIKEE LED Floodlight.
- Cleaning: Periodically clean the surface of the floodlight and the motion sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Inspection: Regularly inspect the power cable for any signs of damage or wear. Check mounting screws for tightness.
- IP66 Rating: The IP66 rating ensures protection against dust and water jets. No special sealing maintenance is required for the sensor head due to advanced ultrasonic die-casting technology.
Image: The MEIKEE LED Floodlight shown operating reliably in rainy conditions, demonstrating its IP66 waterproof capability.
8. Troubleshooting
If you encounter issues with your MEIKEE LED Floodlight, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Remote control batteries dead; Incorrect mode selected. | Check power connection and circuit breaker. Replace remote control batteries. Ensure correct operating mode (e.g., Constant Light Mode) is selected. |
| Motion sensor not working. | Sensor obstructed; Incorrect detection distance setting; Light conditions too bright (for night mode). | Clear any obstructions from the sensor. Adjust detection distance. Ensure it's dark enough for Night Induction Mode, or switch to 24-Hour Induction Mode. |
| Light stays on continuously in induction mode. | Constant motion in detection area; Sensor malfunction. | Check if there is continuous motion (e.g., tree branches, pets) within the sensor's range. Adjust sensor angle or detection distance. If problem persists, contact support. |
| Remote control not responding. | Batteries dead or incorrectly inserted; Out of range. | Replace AAA batteries in the remote, ensuring correct polarity. Move closer to the floodlight (within 8 meters). |
If the issue persists after trying these steps, please contact MEIKEE customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | MEIKEE |
| Model Number | TSFA0070 |
| Product Dimensions (L x W x H) | 6 x 19 x 19 cm |
| Item Weight | 1.31 Kilograms |
| Max Watts | 70 Watts |
| Voltage | 230 Volts |
| Luminous Flux | 6800 Lumens |
| Color Temperature | 6500 Kelvin (Cool White) |
| IP Rating | IP66 |
| Material | Insulating + Nano materials |
| Beam Angle | 270 Degrees (adjustable heads) |
| Remote Control Distance | Up to 8 meters |
| Adjustable Detection Distance | 6m (19.68ft), 9.6m (31.49ft), 12m (39.37ft) |
| Adjustable Induction Lighting Time | 45s, 90s, 120s, 5 minutes, 10 minutes |
| Power Cable Cross-section | 1mm² |
| Installation Type | Wall mount, Ceiling mount |
| Remote Control Batteries | 2 AAA (not included) |
| Specific Uses | Outdoor and enclosed spaces (garden, garage, yard, patio, etc.) |
Image: Energy efficiency label for the MEIKEE LED Floodlight, showing its energy class E.
For more details, refer to the EPREL Product Database.
10. Warranty and Support
MEIKEE products are covered by a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described.
If you have any questions, require technical assistance, or need to claim warranty service, please do not hesitate to contact MEIKEE customer support. We are committed to providing a satisfactory solution within 24 hours.
MEIKEE Official Store: Visit Store
