1. Introduction
Thank you for choosing the NUGRIART Large Metal Chicken Coop. This product is designed to provide a safe, spacious, and protected outdoor enclosure for your poultry and other small to medium-sized animals. Its robust construction, featuring a durable steel frame, PVC-coated hexagonal wire mesh, and a weather-resistant cover, ensures longevity and security for your animals.
Please read this manual thoroughly before assembly and use to ensure proper installation and safe operation. Keep this manual for future reference.
2. Safety Information
- Adult Assembly Required: This product requires assembly by at least two adults. Do not attempt to assemble alone.
- Keep Children Away: Ensure children and pets are kept away from the assembly area to prevent injury.
- Wear Protective Gear: It is recommended to wear gloves during assembly to protect hands from sharp edges.
- Stable Surface: Assemble and place the coop on a level, stable, and firm surface.
- Secure Installation: For added stability and safety, especially in windy conditions, consider securing the coop to the ground using additional stakes or anchors (not included).
- Regular Inspection: Periodically inspect all components for wear, damage, or loose connections. Tighten or replace as necessary.
- Ventilation: Ensure adequate ventilation for the animals housed inside.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact NUGRIART customer service.
- Steel Frame Pipes (various lengths and bends)
- Connectors and Joints
- PVC Coated Hexagonal Wire Mesh Roll
- PE Waterproof and Anti-UV Cover
- Door Assembly (frame, latch)
- Hardware (bolts, nuts, zip ties)
- Instruction Manual
4. Setup (Assembly Instructions)
Assembly typically requires two people and can take several hours. Follow the steps carefully.
4.1 Frame Assembly
- Unpack all components and lay them out on a clean, flat surface.
- Begin by assembling the base frame using the straight pipes and corner connectors. Ensure all connections are secure.
- Attach the vertical support pipes to the base frame.
- Connect the curved roof pipes to the vertical supports and to each other, forming the arched roof structure. Utilize the "Quick-Connect Frame" design for easy assembly.

Figure 4.1: Overview of the assembled chicken coop structure.

Figure 4.2: Details of the quick-connect frame, elastic buckle for mesh, and durable base for stability.
4.2 Wire Mesh Installation
- Unroll the PVC-coated hexagonal wire mesh.
- Starting from one end, attach the mesh to the frame using the provided zip ties. Ensure the mesh is pulled taut to prevent sagging and create a secure enclosure.
- Work your way around the entire frame, securing the mesh at regular intervals (approximately every 6-8 inches). You may need additional zip ties beyond what is provided to ensure maximum security and tension.
- Trim any excess mesh or zip tie ends for a neat finish and to prevent snagging.
4.3 Door Installation
- Assemble the door frame according to the instructions.
- Attach the door assembly to the designated opening in the main frame using the provided hinges and hardware.
- Install the safe lock mechanism on the door. Ensure the door opens and closes smoothly and the latch secures properly.

Figure 4.3: Illustration of the safe lock and waterproof cover material.
4.4 Cover Installation
- Drape the PE waterproof and anti-UV cover over the arched roof frame.
- Secure the cover to the frame using the elastic buckles or ties provided. Ensure it is pulled taut to prevent water pooling and wind damage. The round roof design aids in draining rainwater and snow.

Figure 4.4: The PE cover provides protection against UV rays, water, and snow.
5. Operating Guidelines
The NUGRIART Metal Chicken Coop is versatile and suitable for a variety of small to medium-sized animals.
- Suitable Animals: This coop is ideal for chickens, ducks, rabbits, cats, small dogs, birds, and turtles, providing them with ample space for movement and rest.
- Door Operation: To open the door, unlatch the safe lock and pull the door outwards. To close, push the door shut and secure the latch firmly.
- Environmental Protection: The included PE cover offers essential protection from direct sunlight, rain, and light snow, creating a comfortable environment for your animals.
- Ventilation: The wire mesh design ensures continuous airflow, which is crucial for the health and comfort of your animals.

Figure 5.1: The coop is suitable for a variety of small to medium-sized animals.
6. Maintenance
Regular maintenance will extend the lifespan of your chicken coop and ensure the well-being of your animals.
- Cleaning: Periodically clean the wire mesh and frame with mild soap and water. Rinse thoroughly and allow to dry. Remove any animal waste regularly.
- Inspection: Regularly check all frame connections, bolts, and zip ties for tightness. Re-tighten or replace as needed. Inspect the wire mesh for any damage or holes that could compromise security.
- Cover Care: Ensure the PE cover remains taut to prevent water or snow accumulation, which could cause damage. Clean the cover with a damp cloth if it becomes dirty. In areas with heavy snowfall, gently remove snow from the cover to prevent excessive weight.
- Ground Anchoring: Re-check any ground anchors or stakes periodically, especially after strong winds or heavy rain, to ensure the coop remains securely fastened.
7. Troubleshooting
- Issue: Insufficient Zip Ties for Mesh.
Solution: The provided quantity of zip ties is a starting point. For optimal security and mesh tension, it is highly recommended to purchase additional zip ties from a local hardware store. Apply them at closer intervals for a more robust enclosure. - Issue: Frame Appears Flimsy or Roof Sags.
Solution: Ensure all pipe connections are fully inserted and secured. The wire mesh plays a crucial role in the structural integrity; ensure it is pulled as taut as possible and secured with ample zip ties. For the arched roof, verify that the curved pipes are correctly aligned and supported. If sagging persists, consider adding additional cross-supports or bracing (not included) to reinforce the structure. - Issue: Door is Not Sturdy or Does Not Close Properly.
Solution: Re-check the assembly of the door frame and its attachment to the main coop. Ensure all bolts and hinges are tightened. If the door still feels unstable, you may need to reinforce the door frame connections or adjust the alignment of the hinges.
8. Specifications
| Attribute | Detail |
|---|---|
| Model | 6.5’L×10’W×6.5’H Metallic |
| Dimensions (L×W×H) | 78 x 120 x 78 inches (6.5 ft x 10 ft x 6.5 ft) |
| Material | Steel frame, PVC coated wire mesh, PE cover |
| Color | Metallic |
| Features | Water-resistant, Anti-UV, Durable, Walk-in design |

Figure 8.1: Product dimensions.
9. Warranty and Support
NUGRIART is committed to providing high-quality products. If you encounter any issues or have questions regarding your Large Metal Chicken Coop, please do not hesitate to contact NUGRIART customer service through the platform where you purchased the product. Our team is dedicated to assisting you and ensuring your satisfaction.
Please retain your proof of purchase for any warranty claims or support inquiries.





