Afloia True HEPA Filter Instruction Manual

1. Introduction

This manual provides essential information for the proper use, installation, and maintenance of your Afloia True HEPA Replacement Filter. This filter is specifically designed for use with Afloia MAX and MAGE series air purifiers, including models B088R4JWW3, B09FLRXC6M, and B0922N7WRH. Regular filter replacement is crucial for maintaining optimal air purification performance and ensuring clean air in your environment.

2. Product Features

The Afloia True HEPA Filter incorporates advanced filtration technology to capture a wide range of airborne particles and odors.

• 3600 Ring Design: This design allows for a larger filtration area, enhancing the filter's capacity to capture pollutants from all directions.
• 3-Stage Filtration System:
  1. Pre-filter: Captures larger particles such as dust, lint, pet dander, and hair, extending the life of the subsequent filters.
  2. True HEPA Filter (H13 Grade): Traps 99.97% of airborne particles as small as 0.3 microns, including pollen, dust mites, mold spores, and fine dust.
  3. Activated Carbon Filter: Effectively absorbs various household odors, smoke, cooking smells, pet odors, and volatile organic compounds (VOCs).

Image: Visual representation of the filter's 3-stage filtration capabilities, including pre-filter, True HEPA, and activated carbon, along with its ability to absorb pollen, dust, and odors without pollution.

Image: The 3600 ring design of the Afloia filter, highlighting its comprehensive filtration area.

3. Installation

Follow these steps to install or replace the filter in your Afloia MAX/MAGE Air Purifier:

1. Power Off: Ensure the air purifier is unplugged from the power outlet before proceeding.
2. Access Filter Compartment: Depending on your specific MAX/MAGE model, gently twist or unlatch the bottom cover of the air purifier to access the filter compartment.
3. Remove Old Filter: Carefully pull out the used filter. It may be dusty, so handle it over a waste bin.
4. Unpack New Filter: Remove the new Afloia True HEPA Filter from its protective plastic packaging. Do not operate the air purifier with the filter still in its plastic bag.
5. Insert New Filter: Place the new filter into the air purifier, ensuring it is seated correctly and securely. The 3600 design allows for easy insertion in any orientation.
6. Close Compartment: Reattach the bottom cover of the air purifier, ensuring it is securely fastened.
7. Reset Filter Indicator: Plug the air purifier back into the power outlet. If your purifier has a filter replacement indicator light, press and hold the designated filter reset button (often labeled with a filter icon or part of the power/mode button) for approximately 7 seconds until the indicator light turns off or resets. Refer to your air purifier's specific manual for exact button location and reset procedure.

Image: Illustrated guide for filter replacement, showing the internal structure of the filter and the process of removing the old filter, inserting the new one, and resetting the filter indicator light by long-pressing for 7 seconds.

4. Operating

Once the new filter is installed and the indicator light is reset, your Afloia air purifier is ready for operation. The filter works continuously with your air purifier to clean the air. The purifier's automatic mode, if available, will adjust fan speed based on real-time air quality monitoring, ensuring efficient filtration.

5. Maintenance

To ensure optimal performance and longevity of your air purifier, regular filter maintenance is essential.

• Filter Replacement Frequency: The Afloia True HEPA Filter typically needs to be replaced every 3 to 6 months, depending on air quality and usage frequency. The air purifier's filter indicator light will illuminate when a replacement is due.
• Disposal: Dispose of the old filter with regular household waste. Do not attempt to wash or clean the filter, as this can damage the filtration media and reduce its effectiveness.
• Filter Condition: The image below illustrates the visual difference between a new filter and one after approximately 3 months of use, demonstrating the accumulation of captured particles.

Image: A visual comparison showing a clean, new filter next to a filter after approximately 3 months of use, illustrating the accumulation of dust and particles.

6. Troubleshooting

If you encounter issues related to the filter, consider the following:

• Filter Indicator Light Remains On After Replacement: Ensure you have performed the filter reset procedure correctly. For most Afloia MAX/MAGE models, this involves pressing and holding the filter reset button for about 7 seconds until the light turns off. If the issue persists, consult your air purifier's specific user manual or contact Afloia customer support.
• Reduced Airflow or Odor: If you notice a decrease in airflow or a persistent odor despite recent filter replacement, ensure the new filter was removed from its plastic packaging before installation. Also, verify that the filter is seated correctly within the purifier. If the filter has been in use for an extended period, it may be time for another replacement.

7. Specifications

8. Warranty and Support

For specific warranty information regarding your Afloia True HEPA Filter or your Afloia air purifier, please refer to the documentation included with your original air purifier purchase or visit the official Afloia website. For customer support, technical assistance, or to purchase genuine replacement filters, please contact Afloia customer service through their official channels.