1. Introduction
The Bell+Howell Triburst is an advanced LED lighting system designed to provide powerful, ultra-bright illumination for various indoor spaces. Featuring 72 high-efficiency LED bulbs and a multi-directional triple panel design, it delivers 2000 lumens of light while maintaining energy efficiency. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Triburst LED Light.
Image 1.1: The Bell+Howell Triburst LED Light, showcasing its three adjustable panels and compact design.
Image 1.2: Key features of the Triburst LED Light, including its 2000 lumens brightness, multi-directional capability, and energy-saving design.
2. Safety Information
Please read and understand all safety instructions before installing or operating the Triburst LED Light. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to water or moisture.
- Power Off Before Installation: Always ensure the power supply to the light fixture is turned OFF at the circuit breaker before installation, removal, or maintenance.
- Standard Socket: Install only into a standard E26 screw-in light socket.
- Do Not Disassemble: Do not attempt to disassemble, repair, or modify the light unit. There are no user-serviceable parts inside.
- Avoid Direct Eye Exposure: Do not stare directly into the LED light when it is illuminated, as this may cause eye strain or damage.
- Operating Temperature: Ensure the operating environment is within suitable temperature ranges for electronic devices.
- Weight Consideration: The light unit weighs approximately 1.17 lbs. Ensure your light fixture can safely support this weight.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- 1 x Bell+Howell Triburst LED Light Unit
4. Setup and Installation
The Triburst LED Light is designed for simple, tool-free installation into any standard E26 light socket.
- Turn Off Power: Before beginning installation, ensure the power to the light fixture is completely OFF at the circuit breaker.
- Remove Existing Bulb: Carefully unscrew and remove any existing light bulb from the E26 socket.
- Install Triburst: Screw the Triburst LED Light unit clockwise into the E26 socket until it is snug. Do not overtighten.
- Adjust Panels: Once installed, you can adjust the three multi-directional LED panels to direct light precisely where needed. The panels can be angled up to 360 degrees for optimal coverage.
- Restore Power: Turn the power back ON at the circuit breaker.
Image 4.1: Installation process, illustrating how the Triburst screws into a standard light socket and its adjustable panels.
5. Operating Instructions
The Triburst LED Light operates like a standard light bulb once installed. It is controlled by the existing light switch connected to the fixture.
- Turning On/Off: Use your wall switch to turn the light ON or OFF.
- Adjusting Light Direction: The three LED panels can be manually adjusted to direct light to specific areas. Gently pivot each panel to achieve the desired light distribution.
Image 5.1: The Triburst LED Light with its panels adjusted to provide multi-directional illumination.
Image 5.2: Visual comparison demonstrating the significant brightness increase provided by the Triburst LED Light compared to a standard bulb.
Image 5.3: The Triburst LED Light effectively illuminating a garage, highlighting its suitability for workshops and utility spaces.
Image 5.4: Examples of the Triburst LED Light's versatile application in various indoor environments such as attics, garages, dens, and shops.
6. Maintenance
The Triburst LED Light requires minimal maintenance.
- Cleaning: Ensure the power is OFF before cleaning. Wipe the light unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- No User-Serviceable Parts: The LED bulbs are integrated and not replaceable. Do not attempt to open or repair the unit.
7. Troubleshooting
If you encounter issues with your Triburst LED Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the socket. Light unit not screwed in properly. | Check the circuit breaker and wall switch. Ensure the Triburst is securely screwed into the E26 socket. |
| Light flickers. | Loose connection in the socket. Incompatible dimmer switch (if applicable). | Ensure the Triburst is tightly screwed into the socket. This light is not designed for use with dimmer switches unless explicitly stated. |
| Light output is dim. | Panels are not fully spread or adjusted correctly. | Adjust the multi-directional panels to optimize light spread and brightness. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Bell+Howell |
| Model Name | Triburst White |
| Item Model Number | 8532 |
| Light Type | LED |
| Brightness | 2000 Lumens |
| Number of LED Bulbs | 72 |
| Bulb Base | E26 |
| Power Source | Electric |
| Indoor/Outdoor Usage | Indoor |
| Material | Plastic |
| Product Dimensions (Fully Spread) | 10.5 x 8.99 x 3.5 inches |
| Item Weight | 1.17 pounds |
| UPC | 080313085321 |
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Bell+Howell customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the official Bell+Howell website or contact their customer support channels.
