Hot Wheels Monster Trucks Charge & Chase Challenge Track Set Instruction Manual

Introduction

Welcome to the Hot Wheels Monster Trucks Charge & Chase Challenge! This track set provides an exciting head-to-head race between the oversized Skelesaurus and the 1:64 scale Bone Shaker. Experience dynamic outcomes as the vehicles speed down a hill, through a massive loop, and face off in a thrilling challenge. This manual provides essential information for setup, operation, and maintenance of your track set.

Safety Information

Warning: Small parts may be generated. Keep small parts away from children's mouths to prevent choking hazards.

What's in the Box

• 1 Hot Wheels Monster Trucks Race and Chase Challenge playset
• 1:24 scale Skelesaurus Monster Truck
• 1:64 scale Bone Shaker Monster Truck
• 2 crushed cars

Image: All components included in the Hot Wheels Monster Trucks Charge & Chase Challenge Track Set.

Setup Instructions

1. Unpack Components: Carefully remove all track pieces, vehicles, and accessories from the packaging.
2. Assemble Track Base: Connect the various track sections to form the complete Charge & Chase Challenge layout as shown in the diagram. Ensure all connections are secure.
3. Attach Launch Ramp: Securely attach the orange launch ramp section to the starting point of the track.
4. Position Loop Mechanism: Place the yellow loop mechanism at the end of the track. Ensure it is stable and the internal components are correctly aligned.
5. Place Crushed Cars: Insert the two crushed cars into the designated slots on the track for added demolition action.
6. Prepare Vehicles: Place the oversized Skelesaurus Monster Truck on the elevated starting platform and the 1:64 scale Bone Shaker Monster Truck on the adjacent launch track.

Image: A child setting up the track, demonstrating the assembly process.

Image: The track set fully assembled with the Skelesaurus and Bone Shaker trucks ready at the starting line.

Operating Instructions

1. Initiate Launch: Press the power switch located at the starting platform to release both vehicles simultaneously.
2. Observe the Race: Watch as the Skelesaurus and Bone Shaker race down the hill towards the massive loop.
3. Dynamic Outcomes: A randomizer within the loop mechanism determines the race outcome:
   • Bone Shaker Escapes: The Bone Shaker successfully navigates the loop and continues to safety.
   • Skelesaurus Traps: The Skelesaurus catches the Bone Shaker, trapping it within the loop and knocking it over.
4. Reset for Next Race: After each race, reset the loop mechanism and reposition the vehicles and crushed cars to begin a new challenge.

Image: The oversized Skelesaurus Monster Truck being launched from the starting platform.

Image: The Bone Shaker Monster Truck successfully navigating the loop, indicating a win.

Image: The Skelesaurus Monster Truck trapping the Bone Shaker within the loop, demonstrating an alternative race outcome.

Maintenance

• Cleaning: Wipe down track pieces and vehicles with a damp cloth as needed. Avoid harsh chemicals.
• Storage: For optimal longevity, store the track set and vehicles in a cool, dry place away from direct sunlight. The track is designed for easy storage.

Troubleshooting

• Vehicles not launching correctly: Ensure the vehicles are properly seated on the starting platforms and the launch mechanism is fully reset before pressing the switch.
• Vehicles getting stuck in the loop: Check for any obstructions in the loop mechanism. Ensure the track pieces leading into and out of the loop are securely connected and aligned.
• Track pieces not connecting: Verify that all connectors are clean and free from debris. Apply gentle, even pressure to snap pieces together.

Specifications

Image: Diagram illustrating the dimensions of the Hot Wheels Monster Trucks track set.

Warranty and Support

For warranty information or product support, please refer to the manufacturer's official website or contact their customer service department. Keep your proof of purchase for any warranty claims.

Manufacturer: Mattel