Simmons SPH800

Simmons Pro Hunter Laser Rangefinder User Manual

Model: SPH800

Brand: Simmons

Introduction

The Simmons 6x20 PROHUNTER Laser Rangefinder is designed for precision and speed in various outdoor activities, particularly hunting. This device provides instantaneous distance readouts up to 800 yards, featuring high-quality optics for clear visuals and 6x20 magnification. It incorporates advanced Tilt™ technology for true horizontal distances and a Scan mode for continuous target tracking. Its durable, weatherproof construction with Suregrip™ texture ensures reliable performance in diverse conditions.

Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Always handle the rangefinder with care. Do not look directly into the sun or any bright light source through the rangefinder, as this can cause permanent eye damage. Avoid direct exposure to the laser beam. Keep out of reach of children.

Package Contents

  • Simmons Pro Hunter 800 Rangefinder
  • Wrist Lanyard
  • 1 C battery (included)

Setup

Battery Installation

The Simmons Pro Hunter Rangefinder requires one C battery, which is included. To install the battery:

  1. Locate the battery compartment on the device.
  2. Open the battery compartment cover.
  3. Insert the C battery, ensuring correct polarity (+/-).
  4. Securely close the battery compartment cover.
Simmons Pro Hunter Rangefinder showing battery compartment area

Image: The Simmons Pro Hunter Rangefinder, illustrating the general design where the battery compartment would be located.

Operating Instructions

Powering On and Basic Measurement

To power on the rangefinder and take a basic distance measurement:

  1. Press the power/fire button located on the top of the device. The internal display will activate.
  2. Aim the reticle at your desired target.
  3. Press the power/fire button again to emit the laser and obtain a distance reading. The distance will be displayed in yards.
Simmons Pro Hunter Rangefinder front view

Image: Front view of the Simmons Pro Hunter Rangefinder, showing the objective lens and laser emitter/receiver.

Operating Modes

The Simmons Pro Hunter Rangefinder features multiple modes for enhanced functionality:

  • Standard Mode: Provides a direct line-of-sight distance to the target.
  • Tilt™ Technology: Calculates the true horizontal distance to the target, compensating for uphill or downhill angles. This is crucial for accurate shot placement in varied terrain.
  • Scan Mode: Allows for continuous distance readings as you pan across multiple targets or a moving target. Press and hold the power/fire button while sweeping the rangefinder across the desired area.
Simmons Pro Hunter Rangefinder showing ranging performance

Image: A graphic illustrating the ranging performance of the Simmons Pro Hunter, showing distances for deer, tree, and reflective targets.

Video Demonstration

Video: An honest review of the Simmons rangefinder optics, demonstrating its use and features in an outdoor setting. This video provides a practical look at the device's functionality.

Maintenance

Cleaning the Lenses

To ensure optimal performance and clear vision, keep the lenses clean. Use a soft, lint-free cloth specifically designed for optical lenses. Gently wipe the lens surface to remove dust and smudges. Avoid using abrasive materials or harsh chemicals.

Storage

When not in use, store the rangefinder in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

Simmons Pro Hunter Rangefinder side view

Image: Side view of the Simmons Pro Hunter Rangefinder, highlighting its compact and ergonomic design for easy handling and storage.

Troubleshooting

  • No Display/Power:

    Check if the battery is correctly installed and fully charged. Replace the battery if necessary.

  • Inaccurate Readings:

    Ensure the target is within the specified ranging distance (800 yards). Clean the objective and eyepiece lenses. Make sure there are no obstructions between the rangefinder and the target.

  • Display Flickering:

    This might indicate a low battery. Replace the battery.

Specifications

FeatureDetail
BrandSimmons
Model NumberSPH800
Measuring Range800 Yards
Magnification6x
Objective Lens Diameter20mm
ColorBlack
MaterialBlend
Item Weight8 Ounces
Product Dimensions5.4"L x 2"W x 5"H
Water Resistance LevelWaterproof
Battery Type1 C battery (included)

Warranty and Support

The Simmons Pro Hunter Rangefinder comes with a Limited Manufacturer Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Simmons website.

For technical support, troubleshooting assistance, or service inquiries, please contact Simmons customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

© 2024 Simmons. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.