1. Introduction
The Anyork Red Light Therapy Device is designed to provide near-infrared and red light therapy for temporary relief of minor muscle and joint aches, pain, and stiffness. It features a combination of 808nm infrared and 650nm red light LEDs. This manual provides essential information for safe and effective use of your device.
2. Product Overview
Key Features:
- Dual Wavelengths: 14pcs x 650nm red light and 3pcs x 808nm infrared light.
- Adjustable Timer: 5, 10, 15, or 20-minute treatment sessions.
- Multiple Power Levels: L1, L2, L3, L4 for customized intensity.
- Ergonomic Design: Lightweight (0.48 lbs) and portable for home or travel use.
- LED Display: Shows countdown timer and power level.
Components:
The package includes the Red Light Therapy Device host, protective eyewear, a USB cord, a power adapter plug, and this user manual.
This image displays the handheld device, highlighting its countdown display, battery display, power display, power button, timer button, and on/off button. It also shows the 808nm and 650nm LED lights and the 2600mAh battery capacity.
This image illustrates the complete contents of the product box, including the red light device, protective eyewear, USB charging cable, power adapter, and the user manual.
3. Setup
Charging the Device:
- Connect the USB cord to the device and the power adapter.
- Plug the power adapter into a suitable electrical outlet.
- The battery indicator on the LED display will show charging status.
- Important: Do not turn on or use the device while it is charging.
Initial Power On:
- Ensure the device is fully charged and disconnected from the charger.
- Press and hold the On/Off button (power symbol) to turn on the device.
- The LED display will illuminate, showing the default timer and power settings.
4. Operating Instructions
Understanding the Light Wavelengths:
This image illustrates the two types of light emitted by the device: 14 LEDs for 650nm red light and 3 LEDs for 808nm infrared light. Note that the 808nm infrared light is invisible to the human eye.
Setting the Timer and Power Level:
- After powering on, press the 'Timer' button to cycle through the available treatment durations: 5, 10, 15, or 20 minutes.
- Press the 'Power' button to adjust the intensity level: L1 (lowest) to L4 (highest).
- The selected time and power level will be shown on the LED display.
This image demonstrates how to adjust the 4 power levels and the 5-20 minute adjustable timer using the device's buttons and the corresponding display.
Application Guidelines:
- Wear the provided protective eyewear before starting a session.
- Hold the device 0.5-1.2 inches (approximately 1.25-3 cm) away from your skin.
- Slowly move the device over the desired treatment area.
- Do not use over clothing, creams, ointments, or dressings, as this may reduce effectiveness.
- Recommended usage: 20 minutes per session, 2-3 times a day. For best results, use consistently.
This image shows an individual comfortably using the red light therapy device on their leg, demonstrating a typical application scenario.
This image depicts an individual applying the red light therapy device to their neck and shoulder area, targeting common points of discomfort.
This image shows an individual using the red light therapy device on their knee, illustrating its use for joint pain relief.
This image displays the red light therapy device being used on a person's wrist, demonstrating its versatility for various body parts.
Official Product Video: How to Operate
Video 4.1: This video demonstrates the basic operation of the Anyork Red Light Therapy Device, including how to power it on, adjust settings, and apply it to different body areas.
5. Maintenance
Cleaning:
- Ensure the device is turned off and unplugged before cleaning.
- Wipe the device surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or immerse the device in water.
Storage:
- Store the device in a cool, dry place away from direct sunlight.
- Keep out of reach of children and pets.
6. Troubleshooting
Common Issues and Solutions:
- Device will not turn on: Ensure the device is fully charged. The device cannot be turned on while it is charging. Disconnect from the charger before attempting to power on.
- No noticeable effect: Red light therapy requires consistent use to achieve noticeable results. These effects are often long-lasting rather than immediate. We recommend using the device four times per week for 10-15 minutes per session. Significant improvement is typically observed after at least four weeks of consistent use.
Official Product Video: Troubleshooting
Video 6.1: This video provides solutions and tips for common issues encountered with the Anyork Red Light Therapy Device.
7. Specifications
| Feature | Detail |
|---|---|
| Package Dimensions | 10.63 x 6.18 x 2.64 inches |
| Weight | 1.21 Pounds |
| Batteries | 1 Lithium Ion battery required (included) |
| Date First Available | November 7, 2023 |
| Manufacturer | Anyork |
| ASIN | B0CMTRN4G9 |
8. Safety Information
- Always wear the provided protective eyewear during use to protect your eyes from the intense light.
- The 808nm infrared light is invisible to the human eye; do not assume the device is off if you do not see red light.
- This device is intended for personal use. Consult a healthcare professional if you have any underlying medical conditions or concerns.
- Statements regarding this device have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
9. Warranty and Support
Return Policy:
The product comes with a 30-day return policy for refund or replacement.
Customer Support:
Our customer service team is available 24 hours a day to provide solutions, ensuring you have uninterrupted access and a seamless experience. For support, please refer to the contact information provided with your purchase or visit the official Anyork website.