FiiO FT5

FiiO FT5 90mm Open Planar Magnetic Headphones User Manual

Model: FT5

Introduction

This user manual provides comprehensive instructions for the FiiO FT5 90mm Open Planar Magnetic Headphones. Please read this manual thoroughly before using the product to ensure proper operation and maintenance.

FiiO FT5 90mm Open Planar Magnetic Headphones

Image: The FiiO FT5 headphones, showcasing their open-back design and black finish.

Package Contents

Verify that all items listed below are included in your package:

  • FiiO FT5 90mm Open Planar Magnetic Headphones
  • High-purity monocrystalline copper cable
  • 3.5mm interchangeable audio plug
  • 4.4mm interchangeable audio plug (pre-installed)
  • 6.35mm male to 3.5mm female adapter
  • XLR-4 male to 4.4mm female balanced adapter
  • Luxurious leather storage case
  • Velvet bag
  • 1 pair of Protein leather earpads
  • 1 pair of Suede earpads (pre-installed)
  • User manual (this document)
FiiO FT5 accessories

Image: All included accessories for the FiiO FT5 headphones, including cables, adapters, earpads, and carrying cases.

Product Features

  • Large 90mm Planar Magnetic Driver: Employs a large 90mm planar magnetic driver for balanced sound conversion and minimal distortion.
  • 6µm Ultra-Thin Diaphragm: Features a diaphragm made of PAR material, ensuring excellent dynamics and detailed sound, along with rich bass.
  • Micron-Plated Aluminum-Silver Alloy Coils: Designed for easier power delivery without sacrificing high-frequency detail and rich sound.
  • 20 Neodymium Magnets per Driver: Utilizes N52 neodymium magnets with up to 1.5T magnetic density for strong driving force and reduced distortion.
  • Open-Backed Design: Scientifically designed grille controls and accelerates airflow, providing treble resolution and a wide soundstage.
  • Lightweight Magnesium Aluminum Alloy Construction: Ensures comfort during extended listening sessions.
  • High Sensitivity: Rated at 110dB/1Vrms@1kHz and 96dB/mW@1kHz, making them relatively easy to drive.
  • Detachable Cable with Swappable Plugs: Includes a high-purity monocrystalline copper cable with 3.5mm, 4.4mm, 6.35mm, and XLR-4 interchangeable audio plugs for wide compatibility.
  • Two Types of Earpads: Comes with Protein leather earpads for clear sound and wide soundstage, and Suede earpads for balanced sound and enhanced atmosphere.
FiiO FT5 key features diagram

Image: An overview diagram highlighting the key features of the FiiO FT5 headphones, including the large planar magnetic driver, ultra-thin diaphragm, and included accessories.

Setup and Connection

  1. Choose Earpads: Select either the Protein leather earpads for a clear sound or the Suede earpads for a more balanced and atmospheric sound. The Suede earpads are pre-installed. To change, gently pull off the current earpads and align the new ones with the headphone cups, pressing firmly around the edges until they click into place.
  2. Attach Cable: Connect the dual 3.5mm plugs of the high-purity monocrystalline copper cable to the corresponding jacks on the bottom of each headphone cup. Ensure a secure connection.
  3. Select Audio Plug: The 4.4mm balanced plug is pre-installed on the cable. If your audio source requires a different connection, swap the plug:
    • To remove, twist and pull the current plug from the cable.
    • To attach, align the desired plug (3.5mm, 6.35mm adapter, or XLR-4 adapter) and push it firmly into the cable connector until it locks.
    FiiO FT5 interchangeable audio plugs

    Image: The four types of audio plugs included with the FiiO FT5 headphones: 3.5mm, 4.4mm, 6.35mm adapter, and XLR-4 adapter.

  4. Connect to Audio Source: Plug the selected audio connector into your compatible device (e.g., headphone amplifier, DAC, digital audio player, computer). The FT5 headphones are designed to be easily driven but benefit from a dedicated amplifier for optimal performance.

Operating Instructions

The FiiO FT5 headphones are designed for high-fidelity audio reproduction. Follow these guidelines for optimal listening:

  • Volume Control: Adjust the volume using your audio source device. The FT5 headphones do not have integrated volume controls on the earcups.
  • Comfort and Fit: Adjust the headband to ensure a comfortable and secure fit. The open-back design allows for natural sound and reduces pressure on the ears during long listening sessions.
  • Listening Environment: As open-back headphones, the FT5 allows sound to escape and ambient noise to enter. For the best listening experience, use them in a quiet environment.
  • Burn-in Period: Like many high-fidelity audio products, the FT5 may benefit from a "burn-in" period of several hours of use to allow the drivers to settle and achieve their optimal sound characteristics.

Maintenance and Care

Proper care will extend the lifespan and maintain the performance of your FiiO FT5 headphones:

  • Cleaning: Use a soft, dry cloth to wipe the headphone surfaces. Do not use liquid cleaners or solvents. For earpads, refer to specific cleaning instructions for protein leather or suede.
  • Storage: When not in use, store the headphones in the provided luxurious leather storage case or velvet bag to protect them from dust and physical damage.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable. Disconnect the cable by gripping the plug, not the cable itself.
  • Environmental Conditions: Do not expose the headphones to extreme temperatures, high humidity, or direct sunlight. They are not water-resistant.
  • Earpad Replacement: Earpads are consumable items and may need replacement over time due to wear. Replacement earpads can be purchased from authorized FiiO retailers.

Troubleshooting

ProblemPossible CauseSolution
No sound or low volume
  • Cable not properly connected.
  • Incorrect audio plug used.
  • Audio source volume too low or muted.
  • Headphones not fully plugged into source.
  • Audio source device issue.
  • Ensure both ends of the headphone cable are securely connected.
  • Verify the correct audio plug (3.5mm, 4.4mm, 6.35mm, XLR-4) is used for your source.
  • Increase volume on your audio source. Check if the source is muted.
  • Ensure the plug is fully inserted into the audio jack.
  • Test with another audio source or device.
Distorted sound
  • Volume too high, causing clipping.
  • Poor audio file quality.
  • Loose cable connection.
  • Audio source output impedance mismatch.
  • Reduce the volume on your audio source.
  • Try playing a high-quality audio file.
  • Check and re-secure all cable connections.
  • Ensure your audio source (DAC/Amp) is suitable for 36 Ohm headphones.
Sound only from one side
  • Cable not fully inserted into one earcup.
  • Damaged cable.
  • Audio source balance setting.
  • Check the dual 3.5mm connections to each earcup.
  • Try using a different cable if available.
  • Check the balance settings on your audio source device.
Uncomfortable fit
  • Headband not adjusted correctly.
  • Earpads not suited for preference.
  • Adjust the headband for a snug yet comfortable fit.
  • Try swapping between the Protein leather and Suede earpads to find the most comfortable option.

If the problem persists after trying these solutions, please contact FiiO customer support.

Specifications

FeatureDetail
Model NameFT5-BLACK
Driver Type90mm Planar Magnetic Driver
Diaphragm6µm Ultra-Thin Diaphragm
Coil MaterialMicron-Plated Aluminum-Silver Alloy
Magnets20 N52 Neodymium Magnets per driver (up to 1.5T magnetic density)
Form FactorOver-Ear, Open-Back
Impedance36 Ω
Sensitivity110dB/1Vrms@1kHz | 96dB/mW@1kHz
Frequency Response7 Hz - 40,000 Hz
ConnectivityWired (Detachable Cable)
Headphones JackDual 3.5mm (headphone end)
Interchangeable Plugs3.5mm, 4.4mm (pre-installed), 6.35mm adapter, XLR-4 adapter
Cable Material392 wires of high-purity silver-plated monocrystalline copper
Earpads Included1 pair Protein leather, 1 pair Suede (pre-installed)
Construction MaterialLightweight Magnesium Aluminum Alloy
Carrying CaseLuxurious leather storage case (Black)
Item Weight1.91 Kilograms (product) / 4.21 pounds (package)
Water ResistanceNot Water Resistant
Recommended UseMusic

Warranty and Support

FiiO products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official FiiO website. Keep your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact FiiO customer support through their official website or your local authorized dealer. You can find contact information on the FiiO website: www.fiio.com

© 2024 FiiO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.