1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Tribesigns 47.24-inch Modern Rectangle Coffee Table. Please read these instructions carefully before assembly and retain for future reference.

Figure 1: Tribesigns 47.24-inch Modern Rectangle Coffee Table (Black & Gold)
2. Safety Information
- Keep away from open flames.
- Ensure the table is fully assembled before use.
- Only use on flat, stable surfaces.
- Children should be supervised when near the table.
- Do not exceed the maximum weight recommendation of 200 pounds.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (Faux Marble Wood)
- Bottom Shelf (Faux Marble Wood)
- Geometric Metal Legs (Gold)
- Assembly Hardware (screws, washers, etc.)
- Installation Tool (screwdriver)
- Assembly Guide
4. Assembly Instructions
Assembly is designed to be straightforward and typically takes less than 30 minutes. A screwdriver is the recommended tool for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the included assembly guide for a detailed parts list.
- Attach Legs to Bottom Shelf: Secure the geometric metal legs to the bottom shelf using the provided hardware. Ensure all connections are firm but do not overtighten.
- Attach Tabletop: Carefully place the tabletop onto the assembled leg and bottom shelf structure. Align the pre-drilled holes and secure the tabletop using the remaining hardware.
- Final Tightening: Once all parts are connected, gently tighten all screws to ensure stability. Avoid excessive force to prevent damage.
- Positioning: Carefully flip the table upright and place it in its desired location. The table features adjustable feet for leveling on uneven surfaces.

Figure 2: Product Dimensions and Structure

Figure 3: Tabletop Thickness (1.57 inches)

Figure 4: Adjustable Feet for Stability
5. Operating Instructions
The Tribesigns coffee table is designed for residential use in indoor environments. It features a spacious tabletop and a convenient bottom shelf for storage and display.
- Placement: Position the table on a level surface. Use the adjustable feet to ensure the table is stable and does not wobble.
- Weight Capacity: The table has a maximum weight recommendation of 200 pounds. Distribute weight evenly across the tabletop and bottom shelf.
- Usage: Ideal for holding beverages, books, decorative items, or remote controls. The two-tier design provides ample space for organizing living room essentials.
Video 1: Tribesigns Coffee Table Overview. This video demonstrates the table's features and design in various settings.
6. Maintenance and Care
Proper care will help maintain the appearance and longevity of your coffee table.
- Cleaning: Wipe the table surfaces with a damp cloth, then immediately wipe dry with a clean, dry cloth.
- Spills: The faux marble top is not stain resistant. Clean spills immediately to prevent staining.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals, as these can damage the finish.
- Heat Protection: Use coasters under hot items to protect the tabletop from heat damage.

Figure 5: Key Features: Water Resistant, Heat Resistant, Easy to Clean
7. Troubleshooting
- Wobbling Table: If the table wobbles, adjust the leveling feet located at the bottom of the metal base until the table is stable.
- Loose Connections: Periodically check and tighten all screws to ensure the table remains secure. Do not overtighten.
- Scratches on Metal Base: The metal base can scratch if dragged on rough surfaces. Always lift the table when moving it.
8. Specifications
| Brand | Tribesigns |
| Model Number | HL0270CW |
| Product Dimensions (D x W x H) | 23.42"D x 47.24"W x 18.89"H |
| Item Weight | 48 Pounds |
| Maximum Weight Recommendation | 200 Pounds |
| Frame Material | Metal |
| Top Material Type | Faux Marble (Engineered Wood) |
| Color | Black & Gold |
| Style | Modern |
| Required Assembly | Yes |
| Recommended Number of People for Assembly | 1 |
| Tools Recommended For Assembly | Screw Driver |
| Product Care Instructions | Wipe with Damp Cloth, Wipe with Dry Cloth |
9. Warranty and Support
This product comes with a limited warranty. For specific details regarding warranty coverage, please refer to the warranty information included in your package or contact Tribesigns customer support.
For any questions, missing parts, or assistance with assembly, please contact Tribesigns customer service through their official website or the retailer where the product was purchased.







