Bell+Howell 7642-SL

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Triburst by Bell+Howell

Multi-Directional LED Light - Model 7642-SL

Introduction

Thank you for choosing the Triburst by Bell+Howell Multi-Directional LED Light. This innovative lighting solution is designed to provide ultra-bright, adjustable illumination for various indoor spaces such as garages, workshops, basements, and more. With its easy screw-in installation and multi-directional panels, the Triburst light offers superior brightness and coverage compared to traditional light bulbs.

Safety Information

  • Always ensure the power is turned off at the circuit breaker before installation, removal, or maintenance.
  • This product is designed for indoor use only. Do not expose to water or excessive moisture.
  • Do not attempt to disassemble or modify the light fixture beyond adjusting the panels.
  • Ensure the light socket is in good working condition and can support the weight of the fixture (approximately 1.16 lbs).
  • Keep out of reach of children.

Package Contents

Your Triburst by Bell+Howell Multi-Directional LED Light package should contain:

  • 1 x Triburst Multi-Directional LED Light Unit

Note: No batteries are required or included for the operation of this light fixture.

Setup and Installation

The Triburst LED Light is designed for quick and easy installation into any standard E26/E27 lightbulb socket. No special tools are required.

  1. Turn off Power: Before beginning, ensure the power to the light socket is completely turned off at the circuit breaker to prevent electrical shock.
  2. Unpack: Carefully remove the Triburst light from its packaging.
  3. Screw In: Gently screw the Triburst light into any standard E26/E27 lightbulb socket. Turn clockwise until it is snug. Do not overtighten.
  4. Adjust Panels: Once screwed in, you can adjust the three hinged LED panels to direct light precisely where it is needed. The panels can be angled up to 360 degrees for optimal coverage.
  5. Restore Power: Turn the power back on at the circuit breaker.
Diagram showing how to screw in the Triburst light and adjust its panels.
Figure 1: Easy screw-in installation and adjustable panels. The light screws into a standard socket, and its three metal panels can be angled for 360-degree coverage without tools.
Triburst light illuminating a garage, highlighting its super bright, multidirectional, and energy-saving features.
Figure 2: The Triburst light provides super bright illumination, ideal for garages and workshops, with its multidirectional design and energy-saving LED technology.

Operating Instructions

Operating the Triburst LED Light is as simple as using a standard light bulb:

  • Turning On/Off: Use your existing wall light switch to turn the Triburst light on or off.
  • Adjusting Light Direction: At any time, you can manually adjust the angle of the three LED panels to focus light on specific areas or to achieve broader coverage.
Collage showing the Triburst light used in an attic, garage, den, and shop.
Figure 3: Versatile lighting for various indoor spaces including attics, garages, dens, and shops, demonstrating the light's adaptability.

Maintenance

The Triburst LED Light is designed for durability and minimal maintenance.

  • Cleaning: To clean the light fixture, ensure the power is off. Use a soft, dry cloth to wipe away dust. Do not use liquid cleaners or abrasive materials.
  • LED Lifespan: The LED bulbs are rated to last up to 50,000 hours, providing years of maintenance-free illumination. There are no bulbs to replace.
Image showing the dimensions of the Triburst light and highlighting its stainless steel panels for durability.
Figure 4: The Triburst light features durable stainless steel panels and has dimensions of approximately 10.5 inches wide (fully spread) and 3.5 inches high, with an estimated energy cost of $4.01 per year.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.No power to the socket.
Light not screwed in properly.
Check circuit breaker and wall switch.
Ensure the light is fully and securely screwed into the socket.
Light is dim or flickering.Loose connection.
Voltage fluctuation.
Turn off power, then re-tighten the light in the socket.
Consult an electrician if voltage issues persist.
One or more panels not lighting up.Internal component issue.Contact customer support for assistance. Do not attempt to repair.

Specifications

FeatureDetail
Model NameTriburst
Model Number7642-SL
Brightness2000 Lumens
Color Temperature6500 Kelvin (Cool White)
LED Count144 LED Bulbs
Power SourceCorded Electric
Voltage120 Volts
Wattage60 watts
Bulb BaseE26/E27 Standard Socket
MaterialAcrylonitrile Butadiene Styrene, Aluminum
Dimensions (Fully Spread)10.5 inches (widest point) x 3.5 inches (height)
Item Weight1.16 pounds
Indoor/Outdoor UsageIndoor
Special FeatureEnergy Efficient, Adjustable Light Direction

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Bell+Howell customer service directly. Keep your purchase receipt as proof of purchase.

For more information, visit the official Bell+Howell store: Bell+Howell Store on Amazon

© 2023 Bell+Howell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.