1. Introduction
Thank you for choosing the VINGLI Rattan Nightstands with Charging Station. This manual provides essential instructions for the assembly, operation, and maintenance of your new nightstands. Please read this guide thoroughly before beginning assembly and retain it for future reference.
2. Safety Information
For your safety and to prevent damage to the product, please adhere to the following guidelines:
- Always supervise devices while charging.
- Use only approved power cords and adapters with the charging station.
- Be cautious of pinch points when operating drawers.
- Anchor the nightstand to the wall using the included anti-tip bracket to prevent tipping, especially in households with children or pets.
- Do not exceed the maximum weight capacity of 121 lbs for the tabletop and 44 lbs for each drawer.
3. Setup & Assembly
The VINGLI Rattan Nightstands are designed for easy assembly. Follow the clear instructions and use the labeled pieces provided. Basic assembly tools are included.
3.1 Unpacking and Component Check
Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Verify that all parts listed in the assembly guide are present before proceeding.
3.2 Assembly Steps
Refer to the detailed graphical instructions provided in your product packaging for step-by-step assembly. Ensure all screws and fasteners are tightened securely, but do not overtighten.
Image: Fully assembled VINGLI Rattan Nightstand in Oak finish.
Image: Diagram showing overall dimensions (18.9"W x 15.7"D x 27"H), tabletop weight capacity (121 lbs), and drawer capacity (44 lbs).
3.3 Anti-Tip Bracket Installation
An anti-tip bracket is included for enhanced safety. Securely attach the bracket to the back of the nightstand and to a wall stud according to the instructions. This prevents accidental tipping.
Image: Close-up of the anti-tip wall anchor component.
4. Operating Instructions
4.1 Using the Charging Station
The nightstand features a built-in charging station with 2 AC outlets and 2 USB ports, connected by a 4.9ft power cord. Plug the nightstand's power cord into a wall outlet. You can then charge your devices directly from the nightstand's top surface.
Image: Detail of the charging station with 2 AC outlets and 2 USB ports.
Image: Nightstand in use, showing a phone and other devices charging on the tabletop.
4.2 Drawer Operation
The nightstand is equipped with three spacious drawers (15" W x 11.2" D x 4.3" H) that glide smoothly on metal ball-bearing tracks. Use the brushed brass knobs to open and close the drawers. Avoid forcing drawers if they feel stiff; ensure they are properly aligned.
Image: Close-up of a drawer showing the metal ball-bearing slides for smooth operation.
5. Maintenance
Proper care will extend the life and appearance of your nightstands.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Rattan Care: For the natural rattan detailing, gently dust with a soft brush or cloth. Avoid excessive moisture.
- Spills: Immediately blot any spills with a clean, dry cloth to prevent staining.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the wood and rattan.
- Hardware: Periodically check and tighten all screws and fasteners to ensure stability.
6. Troubleshooting
If you encounter any issues, refer to the following common solutions:
- Wobbly Nightstand: Ensure all leg screws and frame connectors are securely tightened. Check that the nightstand is on a level surface. Adjust leg levelers if applicable.
- Sticking Drawers: Verify that the drawer slides are correctly installed and aligned. Ensure no objects are obstructing the drawer's path. Apply a silicone-based lubricant to the slides if necessary.
- Charging Station Not Working: Check if the nightstand's power cord is securely plugged into a functional wall outlet. Test the wall outlet with another device. Ensure your device's charging cable is properly connected to the USB port or AC outlet.
- Missing Parts: If any parts are missing upon unpacking, please contact VINGLI customer support immediately.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model | 18.9W-3 Drawers |
| Product Dimensions (D x W x H) | 15.7" x 18.9" x 27" |
| Item Weight | 71.43 Pounds (for the set of 2) |
| Tabletop Weight Capacity | 121 Pounds |
| Drawer Weight Capacity | 44 Pounds per drawer |
| Frame Material | Engineered Wood (P2 MDF), Metal, Solid Wood |
| Color | Oak |
| Number of Drawers | 3 |
| Charging Station | 2 AC Outlets, 2 USB Ports, 4.9ft Cord |
| Special Features | Natural Rattan Detailing, Anti-tip Bracket |
| Assembly Required | Yes |
8. Warranty & Support
8.1 Return Policy
This product is eligible for a 30-day return policy for refunds or replacements, as per the retailer's terms.
8.2 Protection Plans
Optional 2-Year or 3-Year Protection Plans may be available for purchase separately to cover unexpected issues. Please refer to the retailer for details on these plans.
8.3 Customer Support
For any questions, concerns, or assistance with assembly or product issues, please contact VINGLI-Direct customer support through the retailer's platform where the product was purchased.