Moimhear Children's Bed 90x200cm with Blackboard and 2 Drawers Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Moimhear Children's Bed 90x200cm. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Moimhear Children's Bed is designed to offer a functional and creative sleeping solution for children. It features a unique house-shaped frame, an integrated blackboard, and two convenient storage drawers.

Figure 1: Moimhear Children's Bed 90x200cm with Blackboard and 2 Drawers

2. Safety Information

• Weight Capacity: The bed is designed to support a maximum weight of 120 kg. Do not exceed this limit.
• Assembly: For safe and efficient assembly, it is recommended that two adults perform the installation.
• Rounded Corners: The bed features three-sided fences with rounded corners to minimize injury risks.
• Material Safety: The slatted frames are made from 100% FSC certified pine wood, ensuring sustainable and safe materials.
• Regular Inspection: Periodically check all bolts and connections to ensure they remain tight and secure.
• Choking Hazard: Keep small parts away from children during assembly.
• Packaging: The bed is delivered in two separate cartons. These may arrive on different days. If any parts are missing after both packages have arrived, please contact customer service immediately.

3. Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the parts list in your separate assembly guide (if provided) or the diagram below.

• Bed frame components (pine wood)
• Slatted bed base (FSC certified pine wood)
• Blackboard panel (84 x 39 cm)
• Large front storage drawer (150 x 67 x 17 cm)
• Side storage drawer (86 x 45 x 17 cm)
• Assembly hardware (screws, bolts, dowels, etc.)

Figure 2: Key components of the Moimhear Children's Bed

4. Setup and Assembly Instructions

Please follow these steps carefully. It is recommended to assemble the bed with two people.

1. Prepare the Area: Clear a spacious area for assembly. Lay out all components and hardware.
2. Assemble the Main Frame: Connect the main bed frame pieces according to the included diagram. Ensure all connections are secure but do not overtighten until the frame is fully assembled.
3. Install the Slatted Base: Place the slatted bed base onto the designated supports within the frame. Ensure each slat is properly seated and secured.
4. Attach the Blackboard: Secure the blackboard panel to the side of the bed frame as indicated in the assembly diagram.
5. Assemble the Drawers: Assemble the large front drawer and the side drawer. The drawer bottoms are made of MDF. Insert the wheels into the bottom of the drawers.
6. Insert Drawers: Slide the assembled drawers into their respective positions under the bed frame.
7. Final Tightening: Once the entire bed structure is complete, carefully tighten all bolts and screws. Do not overtighten to avoid damaging the wood.

Figure 3: Detailed dimensions and component layout for assembly

Figure 4: Slatted bed base detail

5. Operating Instructions

5.1 Using the Storage Drawers

The bed includes two integrated storage drawers for organizing toys, bedding, or other items. The large front drawer measures 150 x 67 x 17 cm, suitable for larger items like blankets or stuffed animals. The side drawer measures 86 x 45 x 17 cm, ideal for smaller items such as chalk for the blackboard.

• To open, gently pull the drawer handle outwards.
• To close, push the drawer back into its compartment until it is fully recessed under the bed.

Figure 5: Bed with storage drawers extended

Figure 6: Detail of a storage drawer

5.2 Using the Blackboard

The bed features an integrated blackboard measuring 84 x 39 cm, providing a creative space for drawing or writing. Use standard chalk for the best results.

• Use only chalk on the blackboard surface. Do not use markers or other writing instruments.
• To clean, wipe with a damp cloth or a blackboard eraser.

Figure 7: Bed with blackboard in use

6. Maintenance

• Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the wood finish.
• Hardware: Periodically check all screws, bolts, and connections to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Blackboard: Clean the blackboard regularly with a damp cloth or eraser to prevent chalk residue buildup.
• Avoid Moisture: Do not expose the bed to excessive moisture or direct sunlight, which can cause warping or fading.

7. Troubleshooting

• Missing Parts: If you find any parts missing after receiving both packages, please contact Moimhear customer service with your purchase details.
• Instability: If the bed feels unstable, recheck all assembly steps and ensure all hardware is securely tightened.
• Drawer Malfunction: If a drawer does not slide smoothly, check for obstructions in the runners or ensure the drawer is assembled correctly.

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or any product-related inquiries, please contact the seller directly through your purchase platform. Ensure you have your order number and product details available for faster assistance.