1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Eaton EWFWRCR15-W-BX-L Smart Outdoor Receptacle. This smart receptacle is designed for outdoor, wet, and damp applications, offering Wi-Fi control of one outlet while the other remains for normal operation. It integrates with the Brightlayer Home App and supports voice control via Amazon Alexa or Google Assistant.
Figure 1: Front view of the Eaton EWFWRCR15-W-BX-L Smart Outdoor Receptacle, showing the two outlets and the control button.
2. Safety Information
Please read and understand all instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker or fuse before installation or servicing.
- This device must be installed in an appropriate weather-resistant cover suitable for wet or damp locations.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Do not use this device with dimmers.
- Ensure all connections are secure and properly insulated.
- This product is for outdoor use only when installed in a suitable weather-protective enclosure.
3. Package Contents
Verify that all components are present before beginning installation:
- Eaton EWFWRCR15-W-BX-L Smart Outdoor Receptacle
- Mounting Screws
4. Setup and Installation
Follow these steps for proper installation of your smart outdoor receptacle:
- Turn Off Power: Locate the circuit breaker controlling the outlet where you intend to install the smart receptacle and turn it OFF. Verify power is off using a voltage tester.
- Remove Existing Receptacle: Carefully remove the existing wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (line, load, neutral, ground).
- Wire the Smart Receptacle: Connect the wires to the Eaton Smart Outdoor Receptacle. This device is designed for 15A, 125V AC applications. The terminals are clearly marked.
- Green Screw: Ground wire (bare copper or green).
- Silver Screws: Neutral wire (white).
- Brass Screws: Line/Hot wire (black).
Figure 2: Back view of the receptacle, illustrating the wiring terminals for ground, neutral, and line connections.
Figure 3: Side view of the receptacle, showing the compact design and screw terminals.
Ensure all wire connections are tight and secure. For 3-way applications, refer to specific wiring diagrams provided by Eaton or consult a qualified electrician.
Figure 4: Side view indicating specific terminals for 3-way wiring configurations.
- Mount the Receptacle: Carefully fold the wires into the electrical box and secure the smart receptacle using the provided mounting screws.
- Install Weather Cover: This receptacle MUST be installed in an appropriate weather-resistant cover (not included) to protect it from the elements.
- Restore Power: Turn the circuit breaker back ON.
5. Operating Instructions
The Eaton Smart Outdoor Receptacle provides Wi-Fi control for the bottom outlet, while the top outlet functions as a standard receptacle.
5.1 Initial Setup and App Connection
- Download Brightlayer Home App: Download the Eaton Brightlayer Home App from your device's app store (available for iOS and Android).
- Create Account: Open the app and follow the on-screen instructions to create a new account or log in to an existing one.
- Add Device: In the app, select the option to add a new device. Follow the app's prompts to put the smart receptacle into pairing mode (usually by pressing and holding the control button on the receptacle until an indicator light flashes).
- Connect to Wi-Fi: The app will guide you through connecting the receptacle to your home's 2.4 GHz Wi-Fi network. No separate hub is required.
5.2 Smart Features
- Remote Control: Control the bottom outlet remotely via the Brightlayer Home App from anywhere with an internet connection.
- Schedules: Set custom schedules for the bottom outlet to turn on or off automatically at specific times.
- Groups and Scenes: Group multiple Eaton smart devices together and create custom scenes for simultaneous control (e.g., "Outdoor Lights On").
- Voice Control: Integrate with Amazon Alexa or Google Assistant for hands-free control. Follow the instructions within the Brightlayer Home App to link your voice assistant account.
6. Maintenance
The Eaton Smart Outdoor Receptacle requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Brightlayer Home App for available firmware updates to ensure optimal performance and security.
- Inspection: Regularly inspect the receptacle and its weather cover for any signs of damage or wear. Replace if necessary.
7. Troubleshooting
If you experience issues with your smart outdoor receptacle, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Receptacle not responding to app/voice commands. | No power, Wi-Fi disconnected, app issue, device not paired. | Check circuit breaker. Verify Wi-Fi signal strength. Restart router. Re-pair device with app. Check app for server issues. |
| Indicator light is off or solid red. | No power, device error. | Check circuit breaker. Perform a factory reset (refer to app instructions for specific steps). |
| Cannot connect to Wi-Fi during setup. | Incorrect Wi-Fi password, 5GHz network, weak signal. | Ensure correct 2.4 GHz Wi-Fi network is selected. Re-enter password carefully. Move receptacle closer to router or use a Wi-Fi extender. |
| Bottom outlet not working. | Controlled by app, power off. | Check app to ensure the outlet is turned on. Verify power at the circuit breaker. |
8. Specifications
- Model Number: EWFWRCR15-W-BX-L
- Electrical Rating: 15 Amp, 125 Volt AC
- Total Power Outlets: 2
- Color: White
- Material: Copper (internal components)
- Connectivity: Wi-Fi (2.4 GHz)
- Compatibility: Brightlayer Home App, Amazon Alexa, Google Assistant
- Dimensions: Approximately 4.53 x 2.52 x 2.28 inches
- Weight: Approximately 6 ounces
- Manufacturer: Eaton
9. Warranty and Support
For warranty information and technical support, please visit the official Eaton website or contact Eaton customer service. Keep your purchase receipt as proof of purchase for warranty claims.
- Eaton Official Website: www.eaton.com
- Brightlayer Home App Support: Refer to the 'Help' or 'Support' section within the Brightlayer Home App for FAQs and troubleshooting guides.
